Responsibilities
Erect and install batching and mixing equipment at customer job sites.Complete the mechanical installation of plant equipment.Verify equipment is delivered, staged, and ready for installation.Confirm footings are properly located before installation begins.Maintain daily and weekly progress reports and document any issues.Communicate project delays, field issues, and change order requests to the Field Services Manager.Coordinate with customers and job site personnel as needed.Keep the job site clean and secure at the end of each workday.Assist with equipment start-up and troubleshooting.Perform additional field service duties as assigned.Qualifications
High school diploma or equivalent required.Valid driver's license required.Experience with commercial or industrial construction projects required.Experience in industrial controls preferred.Construction or related field experience preferred.Knowledge of basic engineering and construction principles is a plus.Ability to read and interpret engineering assembly drawings.Strong mechanical aptitude and construction skills.Ability to use hand tools, power tools, measuring tools, portable welders, cutting torches, rigging equipment, ladders, and other construction equipment.Ability to operate equipment such as telescopic forklifts and aerial lifts.Basic math skills, including measurements and fractions.Strong problem-solving and communication skills.Ability to work independently and as part of a team.Ability to prioritize work and meet project schedules with limited supervision.Ability to perform physically demanding work and work outdoors in all weather conditions.Commitment to following all safety policies and procedures.Willingness to travel extensively (approximately 80–90%), with projects typically lasting 1–3 weeks. Read LessKey Responsibilities:
Design, develop, program, and support PLC and HMI control systems for industrial equipment applicationsCreate machine control architectures including PLCs, HMIs, VFDs, servo systems, sensors, and integrated safety componentsDevelop, document, and maintain standardized, structured control code and programming practicesDesign and integrate safety control systems in compliance with applicable NFPA, UL, and OSHA standardsProduce electrical schematics, panel layouts, wiring diagrams, and supporting technical documentationSelect electrical components and generate accurate Bills of Materials (BOMs)Provide technical support during panel fabrication, wiring, system verification, and testingReview designs to ensure compliance with electrical codes, safety requirements, and internal standardsParticipate in Factory Acceptance Testing (FAT), equipment startup, and field commissioning activitiesDiagnose and resolve electrical and controls issues during installation and post-deployment supportCollaborate with manufacturing, service teams, and customers to deliver effective technical solutionsQualifications:
Bachelor’s degree in Electrical Engineering, Automation Engineering, or related field with 3+ years of relevant experience, or equivalent hands-on industry experienceExperience programming and troubleshooting PLC-based control systemsProficiency developing and supporting HMI applicationsStrong knowledge of industrial electrical systems including 480V power distribution, VFDs, motors, sensors, and controlsAbility to interpret and create electrical schematics and technical drawingsPreferred Qualifications:
Experience with industrial mixing, process equipment, or heavy industrial machineryKnowledge of motion control, servo drives, and coordinated motion applicationsFamiliarity with UL 508A panel standards and NFPA 79 requirementsHands-on experience with field startup, commissioning, and equipment validationStrong written and verbal communication Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
NEW PAY RATE
Job is in North Dakota. License must reciprocate to ND. Working 60-70 hours per week. $125 per diem on days worked. Long-term work.
Key Responsibilities
Run and install rigid, EMT, and other types of conduit with precision and according to specifications.Pull wire, make terminations, and ensure connections are clean, secure, and code-compliant.Install, troubleshoot, and repair electrical panels, switchgear, breakers, and distribution equipment.Read and interpret blueprints, drawings, and one-line diagrams to complete work accurately.Bend conduit by hand or with hydraulic benders to meet layout and installation requirements.Support installation of UPS systems, generators, transfer switches, and other data center power equipment.Perform testing, verification, and quality checks on completed work.Maintain a safe and organized work environment, following lockout/tagout and all jobsite safety requirements.Work closely with foremen, supervisors, and other trades to keep projects on schedule.Qualifications
Licensed Journeyman Electrician in North Dakota (or a state that reciprocates to ND)3+ years of field experience running conduit, pulling wire, and making terminations in industrial or commercial settings.Proficiency with conduit bending (hand and hydraulic) and wire pulling.Strong knowledge of NEC codes and safe electrical practices.Experience working on large-scale or mission-critical projects (data centers preferred).Ability to read and work from blueprints, plans, and technical drawings.Reliable, self-motivated, and able to work independently or as part of a team.Physical Requirements
Ability to lift 50 lbs, climb ladders, and work in tight or elevated spaces.Comfortable working in an active construction environment with varying conditions.Willingness to work overtime, nights, or weekends as project needs require. Read LessEarn a $1,000 bonus after completing 300 hours of work!
$178 Per Diem on all 7 days if working all available hours.
Responsibilities
Install, troubleshoot, commission, and maintain electrical systems according to drawings and applicable codes.Perform first-time energization (FTE), switching, AutoLOTO, load bank connections/removals, and support Level 3-5 commissioning activities.Read and interpret blueprints, one-line diagrams, schematics, and installation drawings.Install conduit, cable trays, and electrical devices.Follow approved work procedures, safety standards, and maintain accurate documentation.Diagnose electrical issues, complete acceptance testing, and respond to service calls.Coordinate with foremen, project teams, and clients while supporting apprentice electricians.
Qualifications
Licensed Journeyman Electrician with at least 7 years of commercial or industrial electrical experience.Iowa Journeyman Electrician license or eligibility for reciprocal licensing from AK, AR, CO, MN, MT, NE, NH, ND, OK, SD, TX, WI, or WY.Ability to read electrical blueprints, one-line diagrams, and schematics.Experience with conduit bending, cable tray installation, device trim, and load bank operations.Strong communication and documentation skills.Must be at least 18 years old and able to pass a pre-employment drug screen and background check.
Working Conditions
Work is performed on active construction sites and may involve climbing, lifting up to 50 lbs., standing for extended periods, working at heights, in confined spaces, and in varying weather conditions. Regional travel between projects may be required.
Read LessEarn a $1,000 bonus after completing 300 hours of work!
$178 Per Diem on all 7 days if working all available hours.
Responsibilities
Install, troubleshoot, commission, and maintain electrical systems according to drawings and applicable codes.Perform first-time energization (FTE), switching, AutoLOTO, load bank connections/removals, and support Level 3-5 commissioning activities.Read and interpret blueprints, one-line diagrams, schematics, and installation drawings.Install conduit, cable trays, and electrical devices.Follow approved work procedures, safety standards, and maintain accurate documentation.Diagnose electrical issues, complete acceptance testing, and respond to service calls.Coordinate with foremen, project teams, and clients while supporting apprentice electricians.Qualifications
Licensed Journeyman Electrician with at least 7 years of commercial or industrial electrical experience.Iowa Journeyman Electrician license or eligibility for reciprocal licensing from AK, AR, CO, MN, MT, NE, NH, ND, OK, SD, TX, WI, or WY.Ability to read electrical blueprints, one-line diagrams, and schematics.Experience with conduit bending, cable tray installation, device trim, and load bank operations.Strong communication and documentation skills.Must be at least 18 years old and able to pass a pre-employment drug screen and background check.Working Conditions
Work is performed on active construction sites and may involve climbing, lifting up to 50 lbs., standing for extended periods, working at heights, in confined spaces, and in varying weather conditions. Regional travel between projects may be required.
Read Less