E-Verify Poster
Right to Work Poster
Outside Machinist
Summary:
Complete assigned tasks in a safe manner by wearing all required PPE, and by adhering to all applicable safety requirements and standards of the company, customer, and/or regulatory group.Recognize QA requirements and report any circumstances that need attention to the QA Department or immediate supervisor.Identify processes that will have to be accomplished at the shop and fill out all necessary paperwork.Communicate with the supervisor, customer, or designated representative to coordinate specific job-related aspects and ensure job continuity.Follow company, and customer policies, regulations, procedures, and other necessary requirements.Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves without Supervision.Capable of accomplishing the testing of equipment to ensure systems meet specifications, references and drawings without Supervision.Capable of accomplishing the installation and testing of various shop equipment.Duties and Responsibilities:
Review details of the work package such as technical information, specification items, drawings, manuals, sketches, etc.Responsible for the repair, overhaul, maintenance, replacement, alignment, removal, installation, modification, resting, troubleshooting, assembly, and inspection of shipboard and industrial mechanical equipment and related systems.Must regularly lift and/or move up to 50 pounds and seek assistance with weights over 50 pounds.Demonstrate knowledge of shipyard safety best practices (i.e. job hazard analysis (JHA), fire prevention, electrical safety, tool safety, fall protection, hazardous waste operations, confined space entry, hot work operations, etc.)Demonstrate the ability to operate and maintain a sand blaster, parts washer, steam cleaner and paint booth.Demonstrate knowledge of basic math and measuring (i.e. addition, subtraction, fractions, decimals, how to read a tape measure, etc.)Ability to properly care for and use basic tools (e.g. flashlight, tape measure, pliers, feeler gauge, Allen wrench, crescent wrench, combination wrench, socket wrench, Ford wrench, pipe wrench, ball-peen hammer, soft hammer, Phillips and flat head screwdriver).Must adhere to applicable documents, references, and safety guidelines including, but not limited to the following:ABSMSC General Technical Requirements (GTR)NAVSEA Standard ItemsGeneral Specifications/Overhaul of ShipsOSHAManufacturer (OEM) DocumentationNOAA StandardsMIL-STD-777EU. S. Coast Guard Standard ItemsASME / ANSI StandardsAble to withstand environmental factors such as:Outside weather conditionsHigh, precarious placesExposed to fumes and airborne particlesVery loud noise levelPerform other duties as assigned.Occasionally perform other physical activities as required, such as:StoopingBendingSquattingClimbing (including but not limited to, vertical and incline ladders, masts, and kingposts)Crawling (including but not limited to, through scuttles, manhole covers, tanks, and voids)Must be able to perform Essential Functions with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others.Must be able to safely wear a respirator when needed.Experience Requirements:
2nd Class = 2 - 4 years of experience as an Outside Machinist in a shipyard.Other Requirements:
Must be 18 years of age or older to apply.Associates degree, Technical Certification or OEM Certification preferred.Must be able to gain DBIDS credential.Must be able to pass Drug Screening and Work Ability Screening.Must be able to obtain a government facility security pass to all local shipyards.This position requires access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.
E-Verify Poster
Right to Work Poster
Outside Machinist Handyperson
Summary:
A handyperson must have a basic knowledge of the ship building industry and show a willingness to learn, strive, and continually improve in all aspects of his/her work. Capable of accomplishing the installation repair, and maintenance of ship's fluid systems which include pumps, compressors, purifiers, heat exchangers, actuators and valves with some Journeyman assistance and / or oversite. Capable of accomplishing the testing of equipment to ensure systems meet 4E specifications, references and drawings with some Journeyman assistance and / or oversite. Capable of accomplishing the installation and testing of various shop equipment. Performs other related tasks as assigned, some of which may become essential to the position.Duties and Responsibilities:
Demonstrate knowledge of shipyard safety best practices (i.e. job hazard analysis (JHA), fire prevention, electrical safety, tool safety, fall protection, hazardous waste operations, confined space entry, hot work operations, etc.).Demonstrate the ability to operate and maintain a sand blaster, parts washer, steam cleaner and paint booth.Demonstrate knowledge of basic math and measuring (i.e. addition, subtraction, fractions, decimals, how to read a tape measure, etc.)Ability to properly care for and use basic tools (e.g. flashlight, tape measure, pliers, feeler gauge, Allen wrench, crescent wrench, combination wrench, socket wrench, Ford wrench, pipe wrench, ball-peen hammer, soft hammer, Phillips and flat head screwdriver).Knowledgeable of how to find compartments of the ship by space number, and know port from starboard, and forward from aft.Possess a basic assortment of hand tools required as a Handyperson and know how to use them.Follow instructions exactly as given.Basic knowledge of ship building procedures.Work well with others and be able to handle constructive criticism from a mentor.Work safely and know the safety rules and regulations as they apply to you.Know the company Quality Policy and be able to state it when required.Must want to excel in the shipyard.Blank and tag equipment in accordance with NAVSEA Standard Items.Package, label and store material in an organized fashion.Demonstrate knowledge of Naval Ship Work Authorization Form (WAF) procedures.Possess general knowledge of 4E specifications, references and drawings (including category I and II NAVSEA Standard Items).Must regularly lift and/or move up to 50 lbs. and seek assistance with weights over 50 lbs.Able to withstand environmental factors such as:Outside weather conditionsHigh, precarious placesExposed to fumes and airborne particlesVery loud noise levelOccasionally perform other physical activities as required, such as:StoopingBendingSquattingClimbing (including but not limited to vertical and incline ladders, masts, and kingposts)Crawling (including but not limited to through scuttles, manhole covers, tanks, and voids)Perform all other duties as assigned.Experience Requirements:
1st Class = 2 3 years of experience working in a shipyard.Other Requirements:
Must be able to obtain a government facility security pass/DBIDS.Must be able to pass Drug Screening, Work Ability Screening.Must be 18 years of age or older to apply.Some college, trade school, or technical training preferred.Minimum 3 years of marine and/or shipyard experience.This position requires access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.
Read LessE-Verify Poster
Right to Work Poster
Summary:
Project Manager executes projects success by directing, coordinating, and supervising project related activities. A project manager plays a vital role in ensuring that shipbuilding and repair projects are completed on time, within budget, and to the required quality standards, all while maintaining a safe and compliant work environment
Duties and Responsibilities:
Develop detailed project plans outlining the scope, timeline, resources, budget and milestones (PO&AM)
Allocate and manage resources, including labor, materials, and equipment, to ensure the project progresses efficiently.
Create and oversee project budgets, ensuring that costs are controlled and the project remains financially viable.
Develop and maintain project schedules, ensuring that tasks are completed on time and any delays are addressed promptly.
Ensure that all work meets the required standards and specifications, conducting inspections and quality control checks as necessary.
Enforce safety protocols and regulations to ensure a safe working environment for all employees and subcontractors.
Maintain clear and effective communication with clients, vendors, subcontractors, and internal teams, providing regular updates on project status.
Identify potential risks and develop strategies to mitigate them, ensuring that any issues are addressed proactively.
Ensure all work complies with industry regulations, standards, and legal requirements.
Lead and coordinate project teams, providing direction, support, and motivation to achieve project goals.
Address and resolve any issues that arise during the project, whether technical, logistical, or personnel related.
Prepare and present progress reports to senior management, clients, and other stakeholders, highlighting achievements, challenges, and any required adjustments.
Manage contracts with clients, suppliers, and subcontractors, ensuring that all terms are met and any changes are negotiated effectively.
Continuously seek ways to improve project processes, enhance efficiency, and implement innovative solutions to complex challenges.
*Perform all other duties as assigned.
Physical Requirements:
Occasionally perform other physical activities as required, such as:
o Stooping
o Bending
o Squatting
o Climbing (including but not limited to vertical and incline ladders, mast and kingpost)
o Crawling (including but limited to through scuttles, manhole covers, tanks, and voids)
Experience Requirements:
3 years of management and/or supervisory experience that includes the overhaul, repair, alteration, and testing of Navy Vessels.
1 years of specialized experience in the planning and management of multiple projects in a shipyard environment.
Recent experience pertaining to project management to include:
o Financial reporting
o Oral and written communications
o Interpersonal relations
o Managerial techniques
Other Requirements:
This position requires access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.
Read LessSummary:
Responsible for performing corporate Level II/III Nondestructive testing in the VT, PT, MT, and/or UT methods in an ISO 9001 environment.
Duties and Responsibilities:
Must be detail oriented.Perform I, V, G hold points, and critical coating inspections on Naval, MSC, USCG, and/or commercial vessels.Assist with internal and external audits.Closes out all QA documentation for customer review or audit when requested.Conduct QA training throughout the corporation as required.Perform Nondestructive examination methods (VT, PT, MT, and/or UT) at Level II/III as required.Develop inspection plans and reports for various project personnel to follow by, assisting in the preparation of QA workbooks for AIT work, and researching customer specifications and drawings.Perform all other duties as assigned.Able to withstand environmental factors such as:Outside weather conditionsHigh, precarious placesExposed to fumes and airborne particlesVery loud noise levelRequired to sit, use hands to finger, handle, feel, and reach with hands and arms on a regular basis.Must regularly lift and/or move up to 50 lbs. and seek assistance with weights over 50 lbs.Occasionally perform other physical activities as required, such as:StoopingBendingSquattingClimbing (including but not limited to, vertical and incline ladders, masts, and king posts)Crawling (including but not limited to, through scuttles, manhole covers, tanks, and voids)Experience Requirements:
NDT Level II/III certifications in the VT, PT, MT, and/or UT methods.Knowledge of QA processes as they apply to ISO 9001 quality systems.
Other Requirements:
