Qualifications:
Bachelor's or Master's of Science in Civil/Structural Engineering Professional Engineering (P.E.) License Minimum 4+ years of experience in engineering design of building structural systems. Must have demonstrated experience in the structural design for steel and concrete structures on a variety of projects. Must have advanced working proficiency in STAAD Pro Must have working knowledge of Revit. Must have a solid working knowledge of building codes and other applicable structural codes. Should have and display strong communication skills, both verbal and written.Responsibilities:
Maintain effective communications with department members, higher management, and clients. Perform calculations of structural systems (hand calculations, computer-aided calculations (spreadsheets and mathcad), and 3D modeling analysis (Staad)). Assist in creation of contract drawings via providing drawing input to structural designerComments/Special Instructions
PE is non-negotiable.visa sponsorship not possible. The position can be remote or near the client's office. The remote position is justified because the role does not require client and contractor face-to-face interaction, and coordination on the project is executed remotely already. Please ensure the candidate has some industrial experience and not just residential experience.PennDOT requires the services of a Workstation Specialist with advanced PC installation, support, and troubleshooting experience to work with existing PennDOT/IED Delivery Center IT team members to support users located at various offices, construction field site offices, county stockpiles, and other remote offices throughout their geographic five-county region within the Commonwealth. The Workstation Specialist will be responsible for assisting IT staff by providing Tier 2 support for hardware and software and installation and troubleshooting services throughout District 3. Candidate must possess the ability to install and configure PC hardware, peripherals, and software in both a network (primarily) and stand-alone environments. The ability to use diagnostic software is required. The ability to read, understand, and follow technical manuals, schematics, and documented processes in the English language is required. The ability to assemble and support a microcomputer system and multifunction printers, as well as install Cat5e and/or Cat6 cable runs and perform cable terminations, is required. Specific knowledge required in LAN/WAN, TCP/IP, Remedy, MS Windows, RDP, and SCCM. The resource may also be required to document and follow technical processes. Strong communications, customer service skills, leadership, a high level of attention to detail, and the ability to function effectively in a fast-paced environment are also required.
Although the primary focus of this position is to support field site offices, the Workstation Specialist will also be required to support all other areas of PennDOT, including all units throughout the District Office, County Offices and Stockpiles, Traffic Management Center, Driver License Centers, Welcome Centers, Department of Community and Economic Development (DCED), and PA Emergency Management Association (PEMA) remote sites, should the need arise.
Please be advised that this position will require travel throughout The Commonwealth to support various PennDOT locations. This resource will be headquartered in the District 3-0 Office in Montoursville and provide support for all nine counties and stockpiles (Bradford, Columbia, Lycoming, Montour, Northumberland, Snyder, Sullivan, Tioga, and Union). Candidate must possess a valid driver's license and use their personal vehicle to travel to and from sites, as well as transport computer equipment such as computers, monitors, and printers. Candidate must be comfortable traveling to various parts of the state and working around active construction and stockpile sites as well as large fleet equipment. Occasional travel to other districts and/or overnight travel for training may be required. PennDOT will cover expenses falling within The Commonwealth's Expense Reimbursement Guidelines and Policies. Please discuss the travel requirements with each candidate prior to submission to ensure they are willing and able to meet PennDOT's expectations.
Specific duties for the position include:
1. Installs computer system hardware, software, and related peripherals in accordance with departmental procedures and technical manuals.
A. Installs and configures PC hardware and peripherals to meet user requirements.
B. Installs and troubleshoots Cisco VPN routers.
C. Connects/disconnects PCs and printers to the network or local device.
D. Assigns workstation names for PCs being added to the network using Active Directory.
E. Installs related software (Windows, applications, and network drivers) needed for proper functioning of the complete system and all interconnected devices.
F. Installs and configures CISCO AnyConnect VPN software.
G. Upgrades or repairs existing PC equipment by replacing or adding memory, hard drives, and I/O cards as required.
H. Installs and tests images.
I. Plan, schedule, and track hardware deployments.
J. Install and troubleshoot Cat5e/6 network cabling, terminations, and patching.
K. Train end users on use of newly deployed equipment and/or software.
2. Provides direct support for workstation requests and issues.
A. Responds to workstation-related trouble calls both on-site and remotely.
B. Provide PC related support to end users via in-person, telephone, and e-mail.
C. Process requests for enterprise user accounts.
D. Troubleshoots individual PC problems resulting from SCCM pushes.
E. Run SCCM reports and monitor workstations for compliance.
F. Creates and updates Remedy tickets.
3. Garage Diagnostics Software.
A. Ensures mobile devices and adapters are kept current with the latest patches, drivers, firmware, and software updates as well as routinely monitoring devices to ensure they are being connected to the LAN and receiving updates.
B. Masters the troubleshooting procedures and support requirements for the garage diagnostic software and adapters.
4. Mobile iOS device support.
A. Configures and issues new iPhones and iPads.
B. Troubleshoots issues and provides training to users.
C. Monitors and updates devices in the MDM Console.
5. Ensure complete and accurate equipment inventory.
A. Unpacks/packs computer equipment.
B. Receives, checks in, and inventories equipment and reports all inventory transfers.
C. Records inventory information and updates the Remedy Asset Management System.
D. Runs reports from Remedy Asset Management System.
E. Coordinate equipment deliveries and pickups with PennDOT staff.
6. Telecommunications.
A. Support for telecommunication equipment and services, to include wiring, analog lines, VoIP sets, audio and video conference equipment, smartboards, web conferencing, and unified communications (i.e., Microsoft Teams).
7. Document technical processes and/or update existing documentation, if needed.
8. Identify and recommend opportunities for efficiency gains.
Required Skills and Experience
1. Required: Valid Driver's License.
2. Required: Ability and flexibility to travel to areas outside of the designated region, to other districts in PA to attend trainings or meetings or assist other districts when required.
3. Required: 4+ years experience installing, configuring, and troubleshooting PC hardware/software in an enterprise LAN/WAN environment.
4. Required: 4+ years of experience installing and supporting laptops/docking stations.
5. Required: 4+ years of experience installing and supporting multifunction print devices.
6. Required: 2+ years of experience with Remedy or similar ticketing system.
7. Required: 2+ years experience with premise cabling (installing Cat5e/6 cable and terminations).
8. Required: Possess the following core competencies: continuous attention to detail; high performance in a fast-paced, multitasking environment; discipline to follow established SOPs; and effective communication skills, both written and spoken, in the English language.
9. Desired: Experience with Cisco VPN router installation and support.
10. Desired: Experience with Active Directory.
11. Desired: Experience with Hyena System Management Software.
12. Desired: Experience with Microsoft System Center Configuration Manager.
13. Desired: Experience creating process documentation (strong writing skills).
14. Desired: Experience in project management.
15. Desired: Experience leading team deployments.
16. Desired: Experience reading and interpreting architectural and electrical plan sets used for remodeling facilities and/or building new facilities.
PennDOT requires the services of a Workstation Specialist with advanced PC installation, support, and troubleshooting experience to work with existing PennDOT IT team members to support users located at various offices, construction field site offices, county stockpiles, and other remote offices throughout their geographic five-county region within the Commonwealth.
The Workstation Specialist will be responsible for assisting IT staff by providing Tier 2 support for hardware and software and installation and troubleshooting services throughout District 5. Candidate must possess the ability to install and configure PC hardware, peripherals, and software in both a network (primarily) and stand-alone environments. The ability to use diagnostic software is required. The ability to read, understand, and follow technical manuals, schematics, and documented processes in the English language is required. The ability to assemble and support a microcomputer system and multifunction printers, as well as install Cat5e and/or Cat6 cable runs and perform cable terminations, is required. Specific knowledge required in LAN/WAN, TCP/IP, Remedy, MS Windows, RDP, and SCCM. The resource may also be required to document and follow technical processes. Strong communications, customer service skills, leadership, a high level of attention to detail, and the ability to function effectively in a fast-paced environment are also required.
Although the primary focus of this position is to support field site offices, the Workstation Specialist will also be required to support all other areas of PennDOT, including all units throughout the District Office, County Offices and Stockpiles, Traffic Management Center, Driver License Centers, Welcome Centers, and Department of Community and Economic Development (DCED) and PA Emergency Management Association (PEMA) remote sites, should the need arise.
Please be advised that this position will require travel. This resource will be headquartered in the District 5-0 Office in Allentown and provide support for all six counties and stockpiles (Berks, Carbon, Lehigh, Monroe, Northampton, and Schuylkill). Candidate must possess a valid driver's license and use their personal vehicle to travel to and from sites, as well as transport computer equipment such as computers, monitors, and printers. Candidate must be comfortable traveling to various parts of the state and working around active construction and stockpile sites as well as large fleet equipment. Occasional travel to other districts and/or overnight travel for training may be required. PennDOT will cover expenses falling within The Commonwealth's Expense Reimbursement Guidelines and Policies. Please discuss the travel requirements with each candidate prior to submission to ensure they are willing and able to meet PennDOT's expectations.
Specific duties for the position include:
1. Installs computer system hardware, software, and related peripherals in accordance with departmental procedures and technical manuals.
A. Installs and configures PC hardware and peripherals to meet user requirements.
B. Installs and troubleshoots Cisco VPN routers.
C. Connects/disconnects PCs and printers to the network or local device.
D. Assigns workstation names for PCs being added to the network using Active Directory.
E. Installs related software (Windows, applications, and network drivers) needed for proper functioning of the complete system and all interconnected devices.
F. Installs and configures CISCO AnyConnect VPN software.
G. Installs and tests images.
H. Plan, schedule, and track hardware deployments.
I. Install and troubleshoot Cat5e/6 network cabling, terminations, and patching.
Train end users on use of newly deployed equipment and/or software.
2. Provides direct support for workstation requests and issues.
A. Responds to workstation-related trouble calls both on-site and remotely.
B. Provide PC related support to end users via in-person, telephone, and e-mail.
C. Process requests for enterprise user accounts.
D. Troubleshoots individual PC problems resulting from SCCM pushes.
E. Run SCCM reports and monitor workstations for compliance.
F. Creates and updates Remedy tickets.
3. Garage Diagnostics Software.
A. Ensures mobile devices and adapters are kept current with the latest patches, drivers, firmware, and software updates as well as routinely monitoring devices to ensure they are being connected to the LAN and receiving updates.
B. Masters the troubleshooting procedures and support requirements for the garage diagnostic software and adapters.
4. Mobile iOS device support.
A. Configures and issues new iPhones and iPads.
B. Troubleshoots issues and provides training to users.
C. Monitors and updates devices in AirWatch Console.
5. Ensure complete and accurate equipment inventory.
A. Unpacks/packs computer equipment.
B. Receives, checks in, and inventories equipment and reports all inventory transfers.
C. Records inventory information and updates the Remedy Asset Management System.
D. Runs reports from Remedy Asset Management System.
E. Coordinate equipment deliveries and pickups with PennDOT staff.
6. Telecommunications.
A. Support for telecommunication equipment and services, to include wiring, analog lines, VoIP sets, audio and video conference equipment, smartboards, web conferencing, and unified communications (i.e., Skype for Business).
7. Document technical processes and/or update existing documentation, if needed.
8. Identify and recommend opportunities for efficiency gains.
Required Skills and Experience
1. Required: Valid Driver's License.
2. Required: Ability and flexibility to travel to areas outside of the designated region, to other districts in PA to attend trainings or meetings or assist other districts when required.
3. Required: 2+ years of experience installing, configuring, and troubleshooting PC hardware/software in an enterprise LAN/WAN environment.
4. Required: 2+ years experience installing and supporting laptops/docking stations.
5. Required: 2+ years of experience installing and supporting multifunction print devices.
6. Required: 2+ years of experience with Remedy or a similar ticketing system.
7. Required: 2+ years experience with premise cabling (installing Cat5e/6 cable and terminations).
8. Required: Possess the following core competencies: continuous attention to detail; high performance in a fast-paced, multitasking environment; discipline to follow established SOPs; and effective communication skills, both written and spoken, in the English language.
9. Desired: Experience with Cisco VPN router installation and support.
10. Desired: Experience with Active Directory.
11. Desired: Experience with Hyena System Management Software.
12. Desired: Experience with Microsoft System Center Configuration Manager.
13. Desired: Experience creating process documentation (strong writing skills).
14. Desired: Experience in project management.
15. Desired: Experience leading team deployments.
16. Desired: Experience reading and interpreting architectural and electrical plan sets used for remodeling facilities and/or building new facilities.
Qualifications:
Qualifications - External
Experience in working with complicated databases Excellent communication skills, both verbal and written High level of organization and professionalism High level of understanding in office programs, including Outlook/Teams/PowerPoint/Excel/OneNote Ability to travel as neededIdeally, you'll also have:
Familiarity with semi-conductor design and/or construction Displayed ability to learn quickly and driven to broaden your knowledge base Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams Exposure to Mechanical, Electrical, and Process systems in manufacturing Familiarity with Facilities Operations & Engineering to implement and refine facilities capacity modelResponsibilities:
We're looking for a POC Administrator in Manassas, VA. This is a hybrid position that will require travel to the client site as required, in addition to working remotely. In this role, you will be working side by side with the project team to execute work and build client relationships on site. You will assist in Tracking and assigning points of connection (POC) for services off of the main distribution for the facility. You will be part of a team responsible for managing these connections. This support will vary from day to day, addressing the clients' highest priorities. Your ability to communicate effectively and tackle projectchallenges will allow you to thrive in our fast-paced environment. You will also assume additional duties and projects as directed by management
Day-to-day activities Attending meetings Managing database Reviewing TSR information and inputting the data into the database or reaching out to appropriate disciplines to get missing information to prepare for meetings Reviewing bluebeam sessions and making appropriate markups to prepare for meetings Communicating with appropriate personnel to obtain additional information needed for database data Creating laminated streamers for tagging in the field Field work including but not limited to hanging laminated streamers, verifying point of connections (POC's) are available or taken, verifying if laterals are installed or not installed, verifying locations of laterals, POC's, VMB's.Comments/Special Instructions
This role is intended to be contract to hire after 3-6 months as long as performance and team fit are aligned.
Read LessQualifications:
Here's what you'll need:
Associate of Applied Science in Electrical Engineering Technology, Automation, Mechatronics, or a related field with equivalent experience. 8+ years of experience in PLC/HMI programming or industrial automation Expert-level PLC programming skills across one or more platforms Proven experience leading automation projects and system commissioning Strong knowledge of control system design, electrical systems, and industrial processesPreferred Qualifications: Advanced experience with:Allen-Bradley (Studio 5000, ControlLogix)Siemens (TIA Portal, S7)Emerson (Machine Edition) Expertise with SCADA platforms (Ignition, FactoryTalk, WinCC, Cimplicity) Knowledge of industrial communication protocols such as, EtherNet/IP, Modbus, Profinet, OPC UA Experience with motion control, robotics, and high-speed automation systems Familiarity with MES integration, databases (SQL), and IIoT systems Experience with safety PLCs and functional safety standards (SIL, ISO) Exposure to industrial cybersecurity practicesAdditional Details:
This is an on-site position with work to be performed on the client site in Santa Clara, CA. After-hours on-call support services are occasionally requested. Relocation assistance may be provided for qualified candidates. Requires field mobility, including walking long distances, climbing ladders, working in tight spaces, and lifting up to 25 lbs.Travel may be required.
Must pass background check and drug screening and be fully authorized to work in the U.S. (no sponsorship).Responsibilities:
We're seeking a Career level Controls Technician to join our team in Santa Clara, California, who is excited to have the chance to work on projects enabling a semiconductor production facility. Your primary responsibility will be designing, developing, and leading the implementation of complex industrial automation systems. This role involves advanced PLC programming, HMI/SCADA system design, system architecture, and full project lifecycle ownership from concept through commissioning. The role also provides technical leadership, mentors junior engineers, and ensures high-quality, scalable automation solutions.
Key Responsibilities:
Design and develop advanced PLC programs using structured, modular, and scalable architectures Lead development of HMI/SCADA systems with focus on usability, performance, and reliability Architect full automation solutions, including PLC, HMI, SCADA, networks, and field devices Oversee system integration with databases, historians, and enterprise systems Lead troubleshooting and root cause analysis for complex system failures and production issues Manage system testing, validation, and onsite commissioning activities Establish and enforce PLC/HMI programming standards and best practices Review and approve electrical designs, control strategies, and system documentation Collaborate with project managers, clients, vendors, and cross-functional engineering teams Mentor and guide junior and intermediate engineers Ensure compliance with safety standards, industry regulations, and cybersecurity practices. Read LessQualifications:
What You'll Bring:
Bachelor's degree in Electrical Engineering or an associated degree in mechanical or chemical from an ABET accredited university. 5+ years of experience in engineering design of industrial control systems. Strong knowledge of International Fire Code (IFC), International Mechanical Code (IMC), UL, and IEEE standards. Experience selecting and specifying electrical and controls equipment and systems. Proven ability to review vendor submittal against contractual and technical requirements. Strong communication, organizational, and collaboration skills in multidisciplinary environments.Ideally, you'll also have:
Engineer in Training (EIT) certification or Professional Engineer (PE) license. 2+ years of experience with semiconductor manufacturing tools (design, installation, or cleanroom use). Field experience working directly with subcontractors and construction personnel. Familiarity with BIM/CAD tools such as Revit or AutoCAD. A forward-thinking mindset with a desire to learn, innovate, and continuously improve.Additional Details:
This is a primarily remote role. The successful candidate will need to work onsite approximately 50% of the first month, then one week onsite per month thereafter. Field work requires mobility, including walking long distances, climbing ladders, and working in active construction environments. Must pass background check and drug screening. Must be authorized to work in the U.S. (no sponsorship available).Responsibilities:
We're looking for a Facilities Instrumentation Engineering Owner's Representative to play a key role in delivering cutting-edge semiconductor manufacturing projects in Boise, ID. This is a high‑impact opportunity to work at the heart of advanced manufacturing, partnering with a multidisciplinary team and key stakeholders in a fast‑paced, high‑tech environment.
In this role, you'll act as the technical owner and advocate for Instrumentation and Controls scope during the Tool Installation phase of semiconductor manufacturing equipment. You'll provide engineering and design oversight for final hookups, including the fire alarm, chemical control system, toxic gas monitoring (TGM) system, and associated programmable logic controllers (PLCs), while helping guide technical decisions in one of the most advanced industrial facilities in the world.
What You'll Do:
Provide engineering and design oversight during installation of semiconductor manufacturing tools. Review and influence instrumentation and controls designs related to factory control systems, fire alarms, chemical controls, and TGM systems. Develop and review technical specifications for tool installation. Review vendor submittals and design deliverables to ensure compliance with client requirements and applicable codes. Collaborate closely with facilities, construction, vendors, and internal project teams to ensure successful execution. Read LessQualifications:
Deal Breakers - Candidate MUST have the following: Possess a valid Driver's license – State of New Mexico New Mexico Class A Commercial Driver's License High School Diploma or General Education degree (GED). 1 to 2 years' experience working In the Water utility fieldPreferred Qualifications:
Basic Knowledge in the operation and maintenance of vehicles, equipment, farm machinery, pumps, and equipment used in and around water and wastewater systems. Basic Knowledge in Operations and Maintenance of Water Distribution Systems Competent in the Operations of Heavy Equipment Digital Literacy (e.g. Maintenance Connection, IonCity, Phone etc.) New Mexico Water Supply Level 1 or New Mexico Water Distribution System 1 or obtain within 2 yearsResponsibilities:
PERKS -
Post probationary period (after conversion to Company) Union position Benefits (medical, dental, vision) - Union provided - No employee cost PTO accrual Paid Holidays Overtime available Clothing/boot allowance Advancements with qualifying certificationsInstall, Operate, locate, Maintain, and repair water distribution infrastructure including water mains, service lines, hydrants, valves, PRVs and meters; establishes and maintains effective sample procedures and records for water lines. Diagnose system operating problems, Performs necessary corrective and remedial activities.
Essential Duties and Responsibilities
Performs routine servicing and corrective maintenance of water and wastewater systems. Locates and marks underground water, wastewater and reclaimed water services by utilizing provided Maps and tools Cleans vehicles, heavy equipment, pumps, tools, and other stationary and potable equipment. Performs routine inspection of vehicles and equipment. Operates and maintains vehicles, equipment, and tools required to load, unload, haul, and spread sand, gravel, dirt, and/or waste products; digs; and refills ditches and trenches. Maintains grounds and buildings; cuts grass, weeds and brushes; trims trees and bushes; rakes grass; leaves and trash, seeds and cares for lawn and ornamental plantings. Understands and carries out oral and written directions. Works safely and adheres to establish safety procedures Establishes and maintains cooperative relationships with those contacted during work. Ability to carry and respond to pages as requested by management. Ability and willingness to work on-call shifts, as requested, including being fit and able to respond to call-ins in a timely manner. Knowledge of Hooking up and towing equipment Familiarity with hand and power tools and equipment commonly used in the maintenance of vehicles, equipment, structure and buildings. Follow all project SOPs, policies and procedures relating to inventory control management of checking out and returning inventory. Operates a Dump Truck, Hydro Excavator, Ditch Witch Etc. Performs other duties as assigned. Read LessQualifications:
Bachelor's degree in Architectural Studies, Computer Drafting and Design, a similar area of focus, or on-the-job experience.Experience in industrial building design and semiconductor or related high-tech types of facilities.Proven track record of successful design delivery; multiple project successes with a variety of scopes and clients with a recommendation of the supervisor acknowledging the track record.Preferred Additional Qualifications:
Experience with 3D modeling and clash detection tools Knowledge of semiconductor tool requirements and installation processes Familiarity with safety and regulatory standards in high-tech manufacturingResponsibilities:
Skills:
Has deep knowledge of required discipline subject areas as well as a high familiarity with other subject areas, both within architectural layout and other disciplines.Has and maintains a deep knowledge of Revit, Navisworks, AutoCAD, Bluebeam, and other modeling and drafting programs necessary in the performance of the work required.Has a solid understanding of how your work affects scope, schedule, and budget. Understands the importance of identifying scope creep early with the ability to elevate to project leadership.Demonstrated ability to identify various options to solve technical problems and itemize pros and cons of each option, followed by the presentation of all options and findings to the design team and customer where appropriate.Ability to firmly grasp the scope of work and provide direction to others, ensuring the team is aligned and moving forward.Understands and implements industry best practices.Provides leadership to more junior staff while maintaining a positive attitude and outlook.Demonstrates intimate knowledge of codes and standards.Ability to break a project down into required tasks, assign hours to each task, and provide work estimates to leadership on an as-needed basis.Extensive modeling and drafting experience utilizing Revit and AutoCAD or other programs as necessary.Extensive model review experience utilizing Navisworks and Bluebeam.Ability to perform as a project lead designer.Has thorough understanding of discipline requirements and is able to train, lead, and mentor junior staff or staff new to the project.Comments/Special Instructions
This role can sit in Manassas, VA or Burlington, VT Read LessQualifications:
Associate's degree in Computer Drafting and Design, a similar course, or on-the-job experience.Experience in building systems mechanical design in semiconductor or related high-tech type facilities.Preferred Additional Qualifications:
Experience with 3D modeling and clash detection tools Knowledge of semiconductor tool requirements and installation processes Familiarity with safety and regulatory standards in high-tech manufacturingSkills:
Has deep knowledge of Revit, Navisworks, AutoCAD, Bluebeam, and other modeling and drafting programs necessary in the performance of the work required.Proven track record of precise drawing and model input.Demonstrated ability to take verbal direction and move project production forward with minimal supervision.Has a solid understanding of how your work affects the schedule.Ability to determine the correct path forward by asking pertinent questions and requesting clarity.Actively pursues knowledge of the focus subject area.Maintains a positive attitude and outlook.Demonstrates working knowledge of drawing and model input.Ability to break assignments down into required tasks, assign hours to each task, and provide work estimates to leadership on an as-needed basis.Has thorough understanding of drafting and modeling standards and requirements.Responsibilities:
Develop detailed layout designs for semiconductor equipment installations within fab and cleanroom environments Coordinate space planning, tool placement, and workflow optimization to maximize efficiency and throughput Collaborate with facilities, process, equipment, and construction teams to align layout designs with operational requirements Ensure compliance with cleanroom standards, safety regulations, and facility constraints (e.g., utilities, structural, and environmental) Produce and maintain layout drawings, 3D models, and installation documentation Support tool move-in, installation planning, and ramp-up activities Identify and resolve layout conflicts, including utility routing, clearance issues, and access requirements Contribute to continuous improvement of layout standards and best practicesIn addition to the responsibilities of entry-level designers, intermediate-level designers are responsible for production speed, drawing, and model input as directed by more senior designers and engineers. Backchecking of your work to ensure a high level of accuracy is key in operating at this level. It is the responsibility of the intermediate-level designer to listen to and follow direction, take notes, self-motivate, be available and reliable, continue learning, and always push to meet deadlines. At this level, making the attempt to try new things is your responsibility and is expected.
General Tasks Performed:
Creates and modifies drawings and models via conversations, redlines, and markups to a high degree of accuracy.Actively participates in department and project meetings.Prepares deliverables for all phases of the project including models, plans, elevations, sections, schedules, and details to support design and architectural leads for meetings, proposals, and construction documents.Readily displays Revit and / or Navisworks models during meetings. Performs model walk throughs as directed by more senior staff during presentations and coordination meetings.Provides status updates on drawing and model inputs. Estimates hours to complete given assignments.Coordinates designs and deliverables and resolves conflicts with / between all disciplines and existing field conditions where required.Assists in field survey of existing conditions.Responds to design and coordination requests, conflict resolution requests, and information sharing requests in a timely manner.Identifies incomplete work or gaps in own work and addresses them prior to review.Comments/Special Instructions
This req is targeting a JP2 or JP3 candidate. Please only submit candidates at the top of the range if they are more a high-level JP2 or JP3 Read LessMajor responsibilities of the Transmission Line Engineer will include:
Design of high and extra-high voltage (69-500kV) transmission lines using PLS-CADD.Prepare construction documents, including plan and profile drawings, structure loading trees, and foundation assembly drawings.Prepare specifications and project design criteria.Provide field support during construction.The ideal candidate will be able to build and maintain strong relationships with clients as well as provide technical leadership, guidance and instruction to less experienced staff members. Experience in HVDC is a plus.Occasional travel to client and project locations will be expected.Other duties as assigned.QualificationsBachelor's Degree in Civil Engineering or related degree from an ABET-accredited program and 3 years of transmission engineering experience required. Consulting preferred. Or Bachelor's Degree in Civil or related Engineering Technology from an ABET-accredited program, successful completion of the Fundamentals of Engineering (FE) exam, and 3 years of transmission engineering experience required. Consulting preferred. Or Master's Degree in Civil Engineering and 2 years of transmission engineering experience required. Consulting preferred. Strong knowledge in standard civil/structural engineering techniques and procedures.Excellent written and verbal communication skills.Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.Strong computer skills (e.g., Microsoft Office Suite).Strong computer skills (e.g,. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, transmission analysis programs.Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.Engineers in Training-EIT Certification preferred. Read Less