Position Overview
Manage day-to-day operations of a work section of a commercial calibration and repair laboratory to meet and exceed customer requirements and company objectives. Responsibilities may include a combination of technical operations, customer service, shipping & receiving, quality representatives, and drivers. This includes direct interaction with customers, corporate personnel, and sales personnel. Act independently to determine methods and procedures on new assignments and may guide the activities of other employees. Use ability as a skilled specialist to contribute to development of concepts and techniques, and to complete tasks in creative and effective ways. Work on assignments that are extremely complex in nature where independent action and a high degree of initiative are required in resolving problems and developing recommendations.
Responsibilities and Duties
Serve as a leader and set an example of embodying the principles of SIMCO’s Mission in Service.Manage the work section to budgeted financial objectives with Profit and Loss (P&L) responsibilities.Manage and control key variable expense accounts, technical and administrative staff.Assist in maintaining appropriate levels of accreditation and scope as defined by management; enhancement and expansion of the laboratory scope of accreditation (UKAS, KEMA, ISO/IEC 17025 Quality System).Instill operational process efficiencies to reduce costs and provide technical support for sales and operational efforts.Manage service performance of the laboratory to corporate objectives and assist technical staff in the analysis and resolution of complex problems commonly found in TMDE.Manage the laboratory assets to maximize the utilization and leverage of assets. Ascertain lab capabilities and increase where relevant.Support the Regional Director/VP in key initiatives and projects.Recommendation for asset acquisition with appropriate justificationQualifications
1. Experience managing a technical service group at a company in a relevant or comparable industry.
2. At least 10 years’ experience in the Calibration and Repair industry with formal experience in Physical Dimensional, RF/Microwave and general test equipment calibration. A formal PMEL or equivalent technical training is highly desirable.
3. At least 2 years’ experience as a section lead or supervisor.
4. Excellent oral and written communication skills.
5. Knowledge of MS Office applications.
6. Ability to manage and motivate employees.
Physical Demands
Must be able to lift up to 45 lbs without assistance. Occasional standing and bending are required.
Working Environment
Work primarily in a laboratory or manufacturing environment at a SIMCO location and or customer sites. Travel may be required to other domestic and possibly international locations.
What We Offer
Full-timeExcellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health and tuition reimbursementPaid time off with vacation, sick and holiday leaveSIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Position Overview
The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy.
The Calibration Technician Apprentice will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician Apprentice will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods or validate new methods.
Responsibilities and Duties
· Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications.
· Collect, compile, measure, summarize, and record data gathered during calibration.
· Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Managers, and customers.
· Identify and correct measurement errors, as applicable.
· Prepare calibration reports and certificates.
· Interact with other technicians, Customer Service Representatives, Account Managers, and customers
· Other duties and responsibilities as may be assigned.
Qualifications
• Basic ability to troubleshoot repair, align and optimize precision equipment.
• Must be able to perform general math and algebra functions.
• Must have good interpersonal and customer service skills
• Knowledge of MS Office applications
• Must be a self-starter with innovation, integrity, and attention to detail with the ability to follow written procedures
• Ability to work in a fast-paced environment within multiple departments
• No previous calibration training required
• Minimum High School diploma or equivalent
Physical Demands
Must be able to lift up to 45 pounds without assistance. Occasional standing and bending are required and repetitive computer work.
Working Environment
Working primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer site. Travel may be required to other domestic and possibly international locations
What We Offer
Full-time, exempt position, sign on bonus eligible
Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement
Paid time off with vacation, sick and holiday leave
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
Receive and ship equipment, parts, and supplies, ensuring all transactions are accurately documented. Also ensures shipments to customers or subcontracted vendors or transferred to other SIMCO locations are properly packaged to ensure safe transportation and arrival at the designated destination.
Responsibilities and Duties
1. Organize and separate equipment for will call, cash on delivery, and shipment.
2. Update the computer system with appropriate status of will call, cod, and shipped equipment.
3. Process appropriate documentation to the accounting, purchasing, and customer service departments.
4. Properly package all equipment, requiring shipment, for transportation to customers/vendors to ensure it arrives undamaged.
5. Reject damaged goods or materials and correspondence with shipper to adjust damages or shortages.
6. Participate in the assembling and shipping of outgoing merchandise or material.
7. Print daily reports of outgoing shipments made on the FedEx and UPS systems.
8. Receive in all materials (parts), subcontracted equipment, and customer equipment according to procedures, and distribute to the appropriate areas/employees.
9. Initiate non-conformance documentation for damaged/incorrect materials (parts)/certification from vendor/subcontractor.
10. Maintain well-organized files and records of transfers, UPS, FedEx, and airway bills shipped daily.
11. Update the computer with the freight charges and airway bill numbers for customer shipments.
12. Stock all supplies and parts in designated places.
13. Maintain accurate inventory of stockroom parts.
14. Maintain safety standards and regulations by keeping the work area clean.
Qualifications
1. Must be able to operate a personal computer, keyboard, and pointing device.
2. Knowledgeable in the use of Windows, Word, Excel, Outlook, and Internet Browsers.
3. Knowledgeable of incoming and final inspection practices.
4. Knowledgeable of standard material handling and packaging practices.
5. Skilled in use of foam in place packaging equipment.
6. Experience working in shipping and receiving department.
7. Knowledge of freight companies.
8. Knowledge of the UPS, FedEx, Airborne Express shipping equipment (i.e. power ship
and use of internet based shipping systems).
9. Familiar with FedEx, Airborne Express, and UPS online tracking systems.
10. Ability to relate information clearly and concisely in English both orally and in writing
Physical Demands
1. Must have the ability to stand, walk, and sit for prolonged periods of time.
2. Must have the ability to lift and carry up to 50 lbs unaided.
Working Environment
The employee works in a warehouse environment with controlled temperatures. While
performing the duties of this job, the employee may be occasionally exposed to fumes or
airborne particles, and toxic or caustic chemicals.
What We Offer
Full-time, non-exempt position
Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health and tuition reimbursement
Vacation, sick and paid holidays
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
Manage day-to-day operations of a commercial calibration and repair laboratory, to meet and exceed customer requirements and company objectives. Responsibilities include technical operations, customer service, shipping & receiving, quality representatives, and drivers. This includes direct interaction with customers, corporate personnel, and sales personnel. Act independently to determine methods and procedures for new assignments and may guide the activities of other employees. Use ability as a skilled specialist to contribute to development of concepts and techniques, and to complete tasks in creative and effective ways. Work on assignments that are extremely complex in nature where independent action and a high degree of initiative are required in resolving problems and developing recommendations. Operations Managers have supervisors as direct reports, in addition to other non-exempt employees.
Responsibilities and Duties
1. Serve as a leader and set an example of embodying the principles of SIMCO’s Mission in Service.
2. Manage laboratory operations to budgeted financial objectives with Profit and Loss(P&L) responsibilities.
3. Manage and control key variable expense accounts, technical and administrative staff.
4. Maintain appropriate levels of accreditation and scope as defined by management; enhancement and expansion of the laboratory scope of accreditation (UKAS, KEMA, ISO/IEC 17025 Quality System).
5. Instill operational process efficiency to reduce costs and provide technical support for sales and operational efforts.
6. Manage service performance of the laboratory to corporate objectives and assist technical staff in the analysis and resolution of complex problems commonly found in TMDE.
7. Manage the laboratory assets to maximize the utilization and leverage of assets. Ascertain lab capabilities and increase where relevant.
8. Support the Regional Director/VP in key initiatives and projects.
9. Recommendation for asset acquisition with appropriate justification.
Qualifications
1. Experience managing a technical service group at a company in a relevant or comparable
industry.
2. At least 10 years experience in the Calibration and Repair industry with formal
experience in Physical Dimensional, RF/Microwave and general test equipment
calibration. A formal PMEL or equivalent technical training is highly desirable.
3. At least 4 years experience as a supervisor/manager.
4. At least 2 years of proven P&L management experience and lab budget creation.
5. Excellent oral and written communication skills.
6. Knowledge of MS Office applications.
7. Ability to manage and motivate employees.
Physical Demands
Must be able to lift to 45 lbs. without assistance. Occasional standing and bending are
required.
Working Environment
Work primarily in a laboratory or manufacturing environment at a SIMCO location and
or customer sites. Travel may be required to other domestic and possibly international
locations.
What We Offer
Full-time, exempt position, sign on bonus eligible
Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement
Paid time off with vacation, sick and holiday leave
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Position Overview
The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations.
Responsibilities and Duties
Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specificationsMaintain primary and/or intrinsic calibration standardsMaintain secondary and/or working calibration standardsPerform maintenance, troubleshooting and repair of precision equipmentDevelop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirementsCollect, compile, measure, summarize, and record data gathered during calibration.Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etcIdentify and correct measurement errors, as applicablePrepare calibration reports and certificatesAdapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally usedPerform uncertainty evaluation and analysis for measurement standards and associated measurement processesTrain subordinates in calibration concepts and proceduresInteract with other technicians, Customer Service Representatives, Account Managers, and customersOther duties and responsibilities as may be assignedQualifications
Minimum High School diploma or equivalentMust be able to perform general math and algebra functionsUnderstanding of Basic StatisticsMust possess good written and oral, communication skillsTechnical writing abilityIntermediate ability to troubleshoot repair, align and optimize precision equipmentIntermediate computer skillsProficient in use of MS Word and ExcelMinimum three years of calibration experience some of which can be offset with formal metrology trainingKnowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)Must have great interpersonal and customer service skillsStrong attention to detailsMust be a self-motivator, work as a team player, and follow written proceduresPhysical Demands
Must be able to lift up to 45 pounds without assistanceOccasional standing and bending are requiredWorking Environment
Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sitesTravel is required to other domestic and possibly international locationsWhat we offer
Full - Time, non-exempt positionExcellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursementVacation, sick and paid holidaysSIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations.
Responsibilities and Duties
1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
2. Maintain secondary and/or working calibration standards
3. Perform basic maintenance, troubleshooting and repair of precision equipment
4. Collect, compile, measure, summarize, and record data gathered during calibration
5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc.
6. Identify and correct measurement errors, as applicable
7. Prepare calibration reports and certificates
8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used
9. Train subordinates in calibration concepts and procedures
10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers
11. Other duties and responsibilities as may be assigned
Qualifications
Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Must possess good written and oral, communication skills Basic ability to troubleshoot repair, align and optimize precision equipment Basic computer skills Proficient in use of MS Word and Excel Minimum one year of calibration experience some of which can be offset by formal metrology training Must have very good interpersonal and customer service skills Strong attention to details Must be a self motivator, work as a team player, and follow written proceduresPhysical Demands
Must be able to lift up to 45 pounds without assistanceOccasional standing and bending are requiredWorking Environment
Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sitesTravel may be required to other domestic and possibly international locationsWhat We Offer
Full-time, exempt position, sign on bonus eligible
Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement
Paid time off with vacation, sick and holiday leave
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
Receive and ship equipment, parts, and supplies, ensuring all transactions are accurately documented. Also ensures shipments to customers or subcontracted vendors or transferred to other SIMCO locations are properly packaged to ensure safe transportation and arrival at the designated destination.
Responsibilities and Duties
1. Organize and separate equipment for will call, cash on delivery, and shipment.
2. Update the computer system with appropriate status of will call, cod, and shipped equipment.
3. Process appropriate documentation to the accounting, purchasing, and customer service departments.
4. Properly package all equipment, requiring shipment, for transportation to customers/vendors to ensure it arrives undamaged.
5. Reject damaged goods or materials and correspondence with shipper to adjust damages or shortages.
6. Participate in the assembling and shipping of outgoing merchandise or material.
7. Print daily reports of outgoing shipments made on the FedEx and UPS systems.
8. Receive in all materials (parts), subcontracted equipment, and customer equipment according to procedures, and distribute to the appropriate areas/employees.
9. Initiate non-conformance documentation for damaged/incorrect materials (parts)/certification from vendor/subcontractor.
10. Maintain well-organized files and records of transfers, UPS, FedEx, and airway bills shipped daily.
11. Update the computer with the freight charges and airway bill numbers for customer shipments.
12. Stock all supplies and parts in designated places.
13. Maintain accurate inventory of stockroom parts.
14. Maintain safety standards and regulations by keeping the work area clean.
Qualifications
1. Must be able to operate a personal computer, keyboard, and pointing device.
2. Knowledgeable in the use of Windows, Word, Excel, Outlook, and Internet Browsers.
3. Knowledgeable of incoming and final inspection practices.
4. Knowledgeable of standard material handling and packaging practices.
5. Skilled in use of foam in place packaging equipment.
6. Experience working in shipping and receiving department.
7. Knowledge of freight companies.
8. Knowledge of the UPS, FedEx, Airborne Express shipping equipment (i.e. power ship
and use of internet based shipping systems).
9. Familiar with FedEx, Airborne Express, and UPS online tracking systems.
10. Ability to relate information clearly and concisely in English both orally and in writing
Physical Demands
1. Must have the ability to stand, walk, and sit for prolonged periods of time.
2. Must have the ability to lift and carry up to 50 lbs unaided.
Working Environment
The employee works in a warehouse environment with controlled temperatures. While
performing the duties of this job, the employee may be occasionally exposed to fumes or
airborne particles, and toxic or caustic chemicals.
What We Offer
Full-time, non-exempt position
Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement
Vacation, sick and paid holidays
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
Receive and ship equipment, parts, and supplies, ensuring all transactions are accurately documented. Also ensures shipments to customers or subcontracted vendors or transferred to other SIMCO locations are properly packaged to ensure safe transportation and arrival at the designated destination.
Responsibilities and Duties
1. Organize and separate equipment for will call, cash on delivery, and shipment.
2. Update the computer system with appropriate status of will call, cod, and shipped equipment.
3. Process appropriate documentation to the accounting, purchasing, and customer service departments.
4. Properly package all equipment, requiring shipment, for transportation to customers/vendors to ensure it arrives undamaged.
5. Reject damaged goods or materials and correspondence with shipper to adjust damages or shortages.
6. Participate in the assembling and shipping of outgoing merchandise or material.
7. Print daily reports of outgoing shipments made on the FedEx and UPS systems.
8. Receive in all materials (parts), subcontracted equipment, and customer equipment according to procedures, and distribute to the appropriate areas/employees.
9. Initiate non-conformance documentation for damaged/incorrect materials (parts)/certification from vendor/subcontractor.
10. Maintain well-organized files and records of transfers, UPS, FedEx, and airway bills shipped daily.
11. Update the computer with the freight charges and airway bill numbers for customer shipments.
12. Stock all supplies and parts in designated places.
13. Maintain accurate inventory of stockroom parts.
14. Maintain safety standards and regulations by keeping the work area clean.
Qualifications
1. Must be able to operate a personal computer, keyboard, and pointing device.
2. Knowledgeable in the use of Windows, Word, Excel, Outlook, and Internet Browsers.
3. Knowledgeable of incoming and final inspection practices.
4. Knowledgeable of standard material handling and packaging practices.
5. Skilled in use of foam in place packaging equipment.
6. Experience working in shipping and receiving department.
7. Knowledge of freight companies.
8. Knowledge of the UPS, FedEx, Airborne Express shipping equipment (i.e. power ship
and use of internet based shipping systems).
9. Familiar with FedEx, Airborne Express, and UPS online tracking systems.
10. Ability to relate information clearly and concisely in English both orally and in writing
Physical Demands
1. Must have the ability to stand, walk, and sit for prolonged periods of time.
2. Must have the ability to lift and carry up to 50 lbs unaided.
Working Environment
The employee works in a warehouse environment with controlled temperatures. While
performing the duties of this job, the employee may be occasionally exposed to fumes or
airborne particles, and toxic or caustic chemicals.
What We Offer
Full-time, non-exempt position
Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement
Vacation, sick and paid holidays
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy.
The Calibration Technician Apprentice will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician Apprentice will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods or validate new methods.
Responsibilities and Duties
· Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, to ensure compliance with published specifications.
· Collect, compile, measure, summarize, and record data gathered during calibration.
· Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc. Managers, and customers.
· Identify and correct measurement errors, as applicable.
· Prepare calibration reports and certificates.
· Interact with other technicians, Customer Service Representatives, Account Managers, and customers
· Other duties and responsibilities as may be assigned.
Qualifications
• Basic ability to troubleshoot repair, align and optimize precision equipment.
• Must be able to perform general math and algebra functions.
• Must have good interpersonal and customer service skills
• Knowledge of MS Office applications
• Must be a self-starter with innovation, integrity, and attention to detail with the ability to follow written procedures
• Ability to work in a fast-paced environment within multiple departments
• No previous calibration training required
• Minimum High School diploma or equivalent
Physical Demands
Must be able to lift up to 45 pounds without assistance. Occasional standing and bending are required and repetitive computer work.
Working Environment
Working primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer site. Travel may be required to other domestic and possibly international locations
What We Offer
Full-time, exempt position, sign on bonus eligible
Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement
Paid time off with vacation, sick and holiday leave
SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read LessPosition Overview
The Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician C will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician C may be asked to report opinions and interpretations.
Responsibilities and Duties
Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specificationsMaintain primary and/or intrinsic calibration standardsMaintain secondary and/or working calibration standardsPerform maintenance, troubleshooting and repair of precision equipmentDevelop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirementsCollect, compile, measure, summarize, and record data gathered during calibration.Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etcIdentify and correct measurement errors, as applicablePrepare calibration reports and certificatesAdapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally usedPerform uncertainty evaluation and analysis for measurement standards and associated measurement processesTrain subordinates in calibration concepts and proceduresInteract with other technicians, Customer Service Representatives, Account Managers, and customersOther duties and responsibilities as may be assignedQualifications
Minimum High School diploma or equivalentMust be able to perform general math and algebra functionsUnderstanding of Basic StatisticsMust possess good written and oral, communication skillsTechnical writing abilityIntermediate ability to troubleshoot repair, align and optimize precision equipmentIntermediate computer skillsProficient in use of MS Word and ExcelMinimum three years of calibration experience some of which can be offset with formal metrology trainingKnowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)Must have great interpersonal and customer service skillsStrong attention to detailsMust be a self-motivator, work as a team player, and follow written proceduresPhysical Demands
Must be able to lift up to 45 pounds without assistanceOccasional standing and bending are requiredWorking Environment
Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sitesTravel is required to other domestic and possibly international locationsWhat we offer
Full - Time, non-exempt positionExcellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursementVacation, sick and paid holidaysSIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.
About Us
SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/.
For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.
Read Less