Why QED?
Quiet Clean environmentEmployees can wear headphones at their stationDiscounted Gym MembershipGrowth PotentialCore hours - 1st Shift 7:00am to 3:30pmWhy you?
Looking to put your experience to good use.You like building things that help people.You like with working with your hands, and your good with them.You like having detailed instructions.You think electronics are interesting.If this sounds like a place you would like to work, check out the job posting below and apply today!
JOB SUMMARY
An Electronics Assembler performs assembly and repairs on electronic and mechanical assemblies by following instructions and using provided tools, equipment and programs, to help the plant team meet its goals.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform assembly operations per documented procedures and applicable standards.Follow all safety and ESD guidelines.Ensure good organization and cleanliness of work bench and manufacturing area.Contribute to building a culture of cooperation and teamwork.Perform assembly and repair operations per documented procedures and applicable standards.Exchange information with auditors as needed.Contribute to building a culture of cooperation and teamwork to improve product flow, quality and reduction in scrap.Must be an active agent to support efforts in increasing quality and efficiency.Review instructions and records for accuracy and correct GDP.Perform QC inspections per documented procedures and applicable standards.Review instructions and records for accuracy and correct GDP.Document Errors though creation of NCRs and QFs.QUALIFICATIONS:
Education and Experience
Skills and Abilities
Required
Ability to perform intricate electrical and/or mechanical assemblyDemonstrated proficiency in written and verbal communicationWork at or above standard job qualityMust successfully complete hands-on solder training within probation periodBasic computer skillsAbility to work at standard job efficiency after reasonable job training periodPreferred
Basic soldering skillsBasic surface mount soldering experienceFamiliarity with industry standardsFamiliarity with Microsoft Word and ExcelPhysical Requirements
Ability to lift 25 poundsAbility to stand for an extended period of timeAbility to stoop, reach and lift with your body and armsAbility to see details at close range and to identify and distinguish colorsAbility to quickly move your hands to grasp, manipulate, or assemble objectsAbility to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objectsAbility to use hand toolsWhy QED?
Quiet Clean environmentEmployees can wear headphones at their stationGrowth PotentialCore hours - 1st Shift 7:00am to 3:30pmFlexible Scheduling for Part TimeWork with Student schedulesWhy you?
Looking to put your experience to good use.You like building things that help people.You like with working with your hands, and your good with them.You like having detailed instructions.You think electronics and building things is interesting.If this sounds like a place you would like to work, check out the job posting below and apply today!
JOB SUMMARY
This role is essential in keeping QED moving in the right direction. A Mechanical Assembler follows documents and instructions to assemble MRI coil housings and part. This is accomplished by using a variety of tools and equipment. In addition, this role supports our 3D printing department (direct digital manufacturing (DDM)) in removal of support material and sanding parts.
ESSENTIAL DUTIES AND RESPONSIBILITIES
QUALIFICATIONS
Education and Experience
Skills and Abilities
Required
Hands-on skill using various tools Ability to follow written and verbal instructionsBasic computer experienceAbility to work at standard job efficiency after reasonable job training periodPreferred
Familiarity with working safely within a plant environmentPhysical Requirements
Ability to lift 25 poundsAbility to stand for an extended period of timeAbility to stoop, reach and lift with your body and armsAbility to see details at close range and to identify and distinguish colorsAbility to quickly move your hands to grasp, manipulate, or assemble objectsAbility to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objectsAbility to use hand tools Read LessWhy QED?
Quiet Clean environmentEmployees can wear headphones at their stationGrowth PotentialCore hours - 1st Shift 7:00am to 3:30pmWhy you?
Looking to put your experience to good use.You like to solve problemsYou like with working with your hands, and your good with them.You like having detailed instructions.You think electronics are interesting.You want to make a difference in people livesThen please join us as a Product Quality Inspector!
JOB SUMMARY
We are seeking a detail-oriented and quality-driven Product Quality (PQ) Inspector to join our team. In this role, you will be responsible for ensuring the highest standards of quality and compliance across incoming materials, in-process production, and finished medical devices. You will conduct inspections, functional testing, and evaluations using a variety of measurement techniques, while accurately documenting results in accordance with established quality systems and Good Documentation Practices (GDP).ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform inspections of purchased parts, subassemblies, in-process product and finished products according to defined criteria using standard physical, mechanical and/ or electrical measurementsAccurately and clearly document the results of inspections including quantitative measurements and observationsDraft or revise inspection documents based on feedback from management and observations of best practicesWork with Operations and Quality Management to drive continuous improvement of inspection methods and processes and meet departmental objectivesPerform review of device history records (DHRs) and other documentation for compliance to established procedures and good documentation practices (GDP)Write non-conformance reports. Ensure non-conformances are closed in a timely mannerParticipate in quality audits of the quality management systemOther tasks as may be assigned by managementQUALIFICATIONS:
Education and Experience
Required
High school diploma or GED; or equivalent combination of education and experienceMinimum of one year experience performing electrical or mechanical QC/QA inspectionsPreferred
Associate’s degree in a technical discipline PCBA inspection experience and/or IPC 610 certificationExperience with ISO and FDA auditsExperience with QC/QA medical device inspection or test, especially MRISkills and Abilities
Required
Meticulous attention to detail – absolute mustMust be self-directed, self-motivated and able to work in a fast-paced team environmentA genuine belief in continuous improvement and disciplined processesSelf-starter with ability to multi-task and prioritize work day/projects independentlyExcellent interpersonal and communication skillsComputer skills including working with word documents, spreadsheets, email and PLM/ERP business applicationsAbility to follow good documentation practices (GDP)sPreferred
Understand and interpret mechanical drawings and electrical schematicsWorking knowledge of printed circuit board (PCB) inspection standards (IPC-A-600)Technical writing skillsRoot cause investigation skills and an understanding of various investigative methods (5 Whys, Fault Tree, etc.)Risk evaluation skills (PFMEA, Fault Tree) and rework adverse effect assessmentPhysical Requirements
Be able to lift 25 lbs. Read LessWhy QED?
Quiet Clean environmentEmployees can wear headphones at their stationBonus opportunitiesAffordable BenefitsDiscounted Gym MembershipGrowth PotentialTuition ReimbursementJOB SUMMARY
Assemble, repair, inspect and test electronic and mechanical assemblies by following instructions and using provided tools, equipment and programs. Be a leader on the floor by training colleagues, helping to troubleshoot and resolve issues and supporting the plant team in efforts to meet its goals.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform assembly and repair operations per documented procedures and applicable standards.Exchange information with auditors as needed.Contribute to building a culture of cooperation and teamwork to improve product flow, quality and reduction in scrap.Must be an active agent to support efforts in increasing quality and efficiency.Review instructions and records for accuracy and correct GDP.Perform QC inspections per documented procedures and applicable standards.Review instructions and records for accuracy and correct GDP.Document Errors though creation of NCRs and QFs.Follow all safety and ESD guidelines.Ensure good organization and cleanliness of workbench and manufacturing area.Train other associates on assemblies which you have training and experience.Able to be trained to complete assembly, repair and sub-test work in any area of the plant.Act as a mentor to less experienced associates.Authoring non-conformance reports and/or change orders as required. Perform rework per standard rework procedures and F079 rework instructions.Perform any test operations per documented procedures and applicable standards.Conduct assembly troubleshooting.Conduct electronic circuit analysis and/or troubleshooting.QUALIFICATIONS:
Education and Experience
Skills and Abilities
Ability to perform intricate electrical and/or mechanical assembly Demonstrated proficiency in written and verbal communicationWork at or above standard job qualityMust successfully complete hands-on solder training within the probation periodBasic soldering skillsBasic computer skillsAbility to work at standard job efficiency after a reasonable job-training periodFamiliarity with basic electronic test equipmentAbility to use critical thinking and troubleshooting techniques for known issuesPhysical Requirements
Ability to lift 25 poundsAbility to stand for an extended period of timeAbility to stoop, reach and lift with your body and armsAbility to see details at close range and to identify and distinguish colorsAbility to quickly move your hands to grasp, manipulate, or assemble objectsAbility to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objectsAbility to use hand toolsLeadership & Team Development
Lead a Manufacturing Engineering team responsible for maintaining and improving manufacturing/repair operations by way of improvements in people, process, equipment and toolsDrive a culture of continuous growth within the Manufacturing Engineering team as lead practitioners of process technology and excellenceResponsible for assigning and overseeing Manufacturing Engineering resources and assets to work in collaboration with plant, engineering and quality personnel to accomplish business initiatives such as manufacturing process, technology and NPI deploymentManufacturing Excellence and Continuous Improvement
Work collaboratively with peers, supervisors and associates of all levels to ensure that appropriate coaching and technical support is being provided in all areas of the organization to meet business and associate development needsPartner with Manufacturing, Engineering, and QA/RA teams to identify opportunities to simplify product designs, improve manufacturability, reduce variation, production defects, and improve overall product quality.Lead challenging cross-functional projects and initiatives to deliver to business needsLead the cross-functional committee responsible for material and product obsolescenceResponsible for organizing and supervising a portfolio of operations improvement projects and programs run by team members of Manufacturing Engineering Be the subject matter expert in process validation and provide coaching to cross functional members and staffSet Manufacturing Engineering team goals to support and lead the organization through new technology and process improvement aligned with business expectations and strategic initiativesTechnology and Automation Advancement
Champion the organization's transition toward increased automation and smart manufacturing technologiesEvaluate, justify, and implement automation solutions that improve efficiency, quality, and throughputDevelop and maintain familiarity with RF coil technology as well as manufacturing/repair industry trends, including new equipment, process technology and manufacturing/repair methodologiesContributes and leads in the socialization, adoption and utilization of AI tools and interacting technologyCollaborate with cross-functional teams to develop long-term manufacturing technology roadmapsWe are looking for candidates who want to gain real-world, hands-on experience, while working towards their educational goals. This opportunity, starting in the summer, will continue through the fall with a flexible schedule to accommodate classes.
Manufacturing Engineering Co-op is an opportunity for an Engineering student to work alongside senior engineers in all areas of operations support. This role will be responsible for individual and team assignments and will work with cross-functional teams to develop the processes, fixtures, and components that help our team build our quality products.
ESSENTIAL JOB FUNCTIONS
Manufacturing Engineering Projects:Assist with documentation and implementation of Automation projects.Basic ECO (Engineering Change Orders) tasks:Print revisionsBOM revisionsRelease/Revise of documentationWork InstructionsTest ProtocolsTest ReportsGemba Actions:Assembly Fit and WI improvementsDesign, print, & evaluate tools to reduce hand-strain and improve throughput.Assembly tolerance stackups/improvementsEducation
2+ years of undergraduate work towards a major in mechanical engineering or related field.
Experience
Prior professional internships, relevant Lab or University experience a plusBasic SolidWorks experience a plusRequired Skills
Skills in MS Office, Outlook, internet, etc.Clear written and interpersonal communication skills.Be able to learn fast and multitask Read Less