We are looking for an Engineering Technician to support our production and repair department. As a member of the production and repair department you’ll be responsible for the repair, assembly, modification, and maintenance of a variety of electronic equipment and Electronic Warfare systems. You will be working on highly complex systems and equipment that are mission critical for the platforms that they operate on. This position will serve on-site at Warner Robins, GA.
Responsibilities
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
Basic Qualifications for Engineering Technician 2
-Minimum of a high school diploma or GED.
-Minimum of 2 years of repair capability experience (i.e., fabricating, repairing, and modifying complex electronic assemblies, circuit cards, shop or line replaceable units and wiring harnesses).
-Must have IPC J-STD-001 Soldering certification and meet associated training requirements.
Preferred Qualifications for Engineering Technician 2
-Ability to assemble and disassemble electronic assemblies using detailed drawings, work instructions or Technical Orders.
-Minimum of 2 years of repair capability experience (i.e., fabricating, repairing, and modifying complex electronic assemblies, circuit cards, shop or line replaceable units and wiring harnesses).
**Aircraft Avionics / Electrical Technician**
**Job Summary**
We are seeking a skilled Aircraft Avionics or Electrical & Environmental (E&E) Systems Technician to maintain, repair, install, and troubleshoot aircraft electrical systems and related equipment. The ideal candidate has strong hands-on experience with wiring, connectors, conduit, and electrical diagnostics—preferably with prior military service (USAF 7-level or equivalent journeyman) and 2–4 years of MOD experience. Fighter aircraft experience is a plus.
**Key Responsibilities**
- Terminate, route, and build connectors and cannon plugs.
- Repair, construct, install, troubleshoot, and maintain aircraft electrical systems and equipment.
- Cut, thread, bend, couple, and strap conduit; cut wire and conduit to required lengths.
- Install, repair, or replace switch boxes, lights, plugs, sockets, fuses, and extension cords.
- Disassemble motors, generators, and related equipment in preparation for repair.
- Troubleshoot electrical malfunctions; inspect circuits, wiring, shielding, and grounding.
- Test electrical equipment for safety, efficiency, and proper operation.
- Read and interpret blueprints, drawings, layouts, technical data, and specifications.
- Use electrical hand tools and voltage/amperage measuring and recording devices.
**Required Qualifications**
- Prior military experience as USAF 7-level (or equivalent journeyman) in avionics or electrical/environmental systems.
- 2–4 years of MOD (Ministry of Defense / military operations or maintenance) experience.
- Proven ability to terminate, route, and fabricate connectors/cannon plugs.
- Strong knowledge of aircraft electrical systems, wiring practices, shielding, grounding, and troubleshooting techniques.
- Ability to work from technical drawings, blueprints, and specifications.
- Proficiency with electrical hand tools and diagnostic/test equipment.
**Preferred Qualifications**
- Fighter aircraft experience.
- Experience with aircraft environmental systems (where applicable).
- Additional certifications or training related to avionics or aircraft electrical systems.
Technician – Prototype Vehicle Builds (Multiple Tracks)
We are seeking motivated Technicians to support prototype vehicle builds in a fast-paced, hands-on environment. Candidates may be considered for one or more tracks based on skills, experience, and interest: Welding Technician, Vehicle Assembly Technician, and Paint Technician.
Experience is preferred, but at the entry level, attitude, accountability, and consistency are critical.
What We’re Looking For (All Tracks)
Demonstrate reliability and strong attendanceWilling to learn, take direction, and follow established processesAble to adapt to change in a dynamic environmentTake ownership and pride in their workMaintain strong attention to detail and safety complianceAdditional Requirements (All Tracks)
Ability to stand, bend, and move in/around vehicles for extended periodsAbility to lift and handle components as neededWillingness to work overtime with short notice when requiredTechnician Tracks
Welding Technician Track
Summary:
This track focuses on MIG/TIG welding for prototype vehicle structures and components, supporting fabrication and structural modifications.
Key Responsibilities:
Perform MIG/TIG welding on prototype vehicle structures and componentsFollow engineering drawings, blueprints, and weld specificationsSupport fabrication, fit-up, and structural modifications as designs evolveInspect weld quality and ensure compliance with standardsWork closely with engineering and build teams to address issuesPreferred Qualifications:
Prior welding experience (automotive or similar industry preferred)Ability to read and interpret technical drawings and blueprintsUnderstanding of weld symbols and measurement toolsVehicle Assembly Technician Track
Summary:
This track focuses on assembling prototype vehicles according to engineering specifications, including mechanical, electrical, and interior components.
Key Responsibilities:
Assemble prototype vehicles according to engineering specificationsInstall mechanical, electrical, and interior componentsTroubleshoot fitment and part issues during buildsPerform rework and adjustments as designs evolveMaintain build quality while meeting daily targetsPreferred Qualifications:
Mechanical aptitude or prior assembly experienceFamiliarity with hand and power toolsAbility to read basic work instructions or diagramsPaint Technician Track
Summary:
This track focuses on preparing and refinishing vehicle surfaces, ensuring a high-quality appearance and finish on prototype builds.
Key Responsibilities:
Prepare vehicle surfaces (sanding, masking, cleaning)Apply primer, basecoat, and clearcoat finishesPerform touch-ups and refinishing as requiredEnsure quality standards for appearance and finishFollow all safety and environmental proceduresPreferred Qualifications:
Automotive paint/refinish experience preferredKnowledge of paint systems and spray equipmentStrong attention to detail and finish quality Read Less