One Tech Engineering is searching for a Mechanical Construction Supervisor for a position located near Earth, Texas. The Mechanical Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.
The candidate must be a US citizen or hold a green card. The candidate should have 7–10 years of experience in Mechanical Construction oversight.
Mechanical Construction Supervisor Responsibilities:
Oversight of mechanical construction activities.Perform quality inspections using ArcGIS / Survey123 and inspection templatesVerify EPC contractor work meets contract and design requirementsDocument inspection results and findings in the company systemsParticipate in daily Plan of the Day (POD) meetingsCoordinate inspection readiness with EPC contractor.Requirements of the Mechanical Construction Supervisor:
7–10 years of experience in Mechanical Construction oversight.Strong background in quality control inspections.Power plant experience (gas, coal, or similar) strongly preferred.Combustion turbine experience a plus, but not required.Experience with ArcGIS, Survey123, or Procore preferred.Valid driver’s license and ability to pass a criminal background check. Read LessOne Tech Engineering is searching for a Civil Construction Supervisor for a position located near Pipestone, Minnesota. The Civil Construction Supervisor will be responsible for oversight, verification, and coordination of all civil and underground utility construction activities associated with a combustion turbine project.
The candidate must be a US citizen or hold a green card. The candidate should have 7+ years of experience in heavy civil or industrial construction.
Civil Construction Supervisor Responsibilities:
Verify contractor work complies with drawings, specifications, and codes.Enforce inspection and test plan (ITP) requirements and hold points.Document and complete owners inspections through our defined inspection program.Escalate non-conformances, risks, and quality deficiencies.Provide oversight of mass concrete foundations, rebar, anchor bolts, and embedded items.Oversee underground utilities including electrical duct banks, piping, and gas lines.Coordinate and verify concrete and soils testing performed by third parties.Serve as interface between owner, contractors, engineering, and QA/QC.Ensure safety compliance and environmental controls such as SWPPP.Maintain inspection documentation and support turnover readiness.Requirements of the Civil Construction Supervisor:
7+ years of experience in heavy civil or industrial construction.Experience with mass concrete and underground utilities.Ability to interpret drawings, specifications, and geotechnical reports.Strong knowledge of QA/QC processes and construction sequencing.Strong verbal and written communication skills. Read LessOne Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Earth, Texas. The Electrical Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.
The candidate must be a US citizen or hold a green card. The candidate should have 7–10 years of experience in Electrical Construction oversight.
Electrical Construction Supervisor Responsibilities:
Oversight of electrical construction activities.Perform quality inspections using ArcGIS / Survey123 and inspection templates.Verify EPC contractor work meets contract and design requirements.Document inspection results and findings in the company systems.Participate in daily Plan of the Day (POD) meetings.Coordinate inspection readiness with EPC contractor.Requirements of the Electrical Construction Supervisor:
7–10 years of experience in Electrical Construction oversight.Strong background in quality control inspections.Power plant experience (gas, coal, or similar) strongly preferred.Combustion turbine experience a plus, but not required.Experience with ArcGIS, Survey123, or Procore preferred.Valid driver’s license and ability to pass a criminal background check. Read LessOne Tech Engineering is searching for a Civil Construction Supervisor for a position located near Earth, Texas. The Civil Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.
The candidate must be a US citizen or hold a green card. The candidate should have 7–10 years of experience in Civil Construction oversight.
Civil Construction Supervisor Responsibilities:
Oversight of civil construction activities.Perform quality inspections using ArcGIS / Survey123 and inspection templates.Verify EPC contractor work meets contract and design requirements.Document inspection results and findings in the company systems.Participate in daily Plan of the Day (POD) meetings.Coordinate inspection readiness with EPC contractor.Requirements of the Civil Construction Supervisor:
7–10 years of experience in Civil Construction oversight.Strong background in quality control inspections.Power plant experience (gas, coal, or similar) strongly preferred.Combustion turbine experience a plus, but not required.Experience with ArcGIS, Survey123, or Procore preferred.Valid driver’s license and ability to pass a criminal background check. Read LessOne Tech Engineering is searching for a Digital Delivery Specialist for a position located in Kansas City, Missouri. The Digital Delivery Specialist will perform basic aspects of the digital project management strategy to further the company’s position and facilitate collaboration with activities, pursuits, and projects.
The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in virtual design and construction, Engineering Technology, or a related field from an accredited program and 4 years of experience.
Local candidates preferred or open to relocation. This is not a remote position.
Digital Delivery Specialist Responsibilities:
Requirements of the Digital Delivery Specialist:
Bachelor’s Degree in virtual design and construction, Engineering Technology, or a related field from an accredited program, and 4 years of experience planning, training, organizing, and delivering complex BIM models and related digital products across project teams.Or an Associate Degree and 6 years of experience planning, training, organizing, and delivering complex BIM models and related digital products across project teams.Or 8 years of experience planning, training, organizing, and delivering complex BIM models and related digital products across project teams in lieu of a degree.Ability to learn and effectively utilize new software programs.Ability to execute and integrate digital delivery into EPC projects.Advanced knowledge of digital delivery software, standards, and project deliverables.Ability to integrate multiple BIM models across various software platforms.Excellent written and verbal communication skills.Strong attention to detail, facilitation, collaboration, organization, and problem-solving skills. Read LessOne Tech Engineering is looking for an Electrical Designer for a position located in Wausau, Wisconsin. The Electrical Designer will create and maintain schematics, wiring diagrams, layout drawings and parts lists used for the manufacture and installation of equipment.
The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate's degree and 2+ years of related experience.
Local candidates preferred. This is not a remote position.
Electrical Designer Responsibilities:
Create detailed and assembly drawings of design components and circuitry using computer-aided design (CAD) software and standard drafting techniques.Select and design parts to meet functional, cost and delivery requirements, and create lists of parts used for the procurement, manufacturing and installation of equipment.Consult with engineers to discuss and interpret design concepts and determine requirements of detailed working drawings.Understand manufacturing and installation processes and what is required on detail and assembly drawings to accomplish them.Read and understand schematics and drawings of mechanical systems.Maintain parts database and drawing libraries.Review work performed by his/her peers for correctness.Perform equipment sizing and design calculations.Requirements for the Electrical Designer:
