New Tech Global is currently seeking Instrument Tubers for a contract position in Houston, Texas.
Overview
The Instrument Tuber is responsible for the layout, fabrication, installation, and assembly of stainless-steel tubing systems used in hydraulic and instrumentation applications. This role requires experience reading hydraulic schematics, working with Swagelok tubing, and performing precision tube bending, cutting, and fitting activities. Candidates should have a strong safety mindset, excellent attention to detail, and the ability to work independently in a fast-paced manufacturing environment.
Project Duration:
Approximately 3–4 Months
Schedule:
Day and Night Shifts Available
Shift start and end times may vary based on production requirements and part arrivals.
Education:
High School Diploma or GED preferred
Interview Requirement:
Candidates will be required to complete an on-site bend test during the interview process. Tools are provided.
Key Responsibilities
Plan and perform tubing installations using drawings, blueprints, sketches, and work instructions.Measure, cut, bend, thread, assemble, and install stainless steel tubing and piping systems.Install tubing, clamps, and support systems as required.Assemble cable trays and cable tray support structures.Coordinate daily work activities with minimal supervision.Utilize hand tools, hydraulic tools, and power tools safely and effectively.Drill and tap holes and install brackets, guards, and related components per engineering drawings.Operate equipment such as man lifts, scissor lifts, overhead cranes, band saws, pressure pumps, hose crimping devices, and hydraulic pumping units.Inspect, maintain, and properly care for tools and equipment.Follow all safety procedures, housekeeping standards, and 6S requirements.Perform other duties as assigned.Qualifications
Previous instrumentation tubing experience using stainless steel tubing systems.Experience working with Swagelok stainless steel tubing strongly preferred.Ability to read and interpret hydraulic schematics and technical drawings.Experience working with Hydraulic Power Units (HPUs).Ability to accurately measure, cut, fit, and bend stainless steel tubing.Minimum 2–3 years of oil and gas industry experience preferred.Experience working with surface equipment, land equipment, or hydraulic systems preferred.Strong mechanical aptitude and attention to detail.Ability to work independently and within a team environment.Commitment to safety, quality, and productivity standards.Physical Requirements
Ability to lift up to 30 pounds.Ability to work at heights up to 65 feet.Ability to stand, walk, bend, and move throughout the workday.Ability to work in a non-climate-controlled industrial environment.This is an excellent opportunity for experienced Instrument Tubers seeking a long-term project with a leading industrial operation in the Houston area.
Pay: $20.00/hour
Schedule: 15–20 hours per week
Duration: 3-month assignment
New Tech Global is currently seeking a Part-Time Marketing Administrative Assistant Intern for an opportunity in Waller, Texas. This is a 3-month contract assignment supporting a busy marketing department. The ideal candidate is organized, detail-oriented, and eager to gain hands-on experience supporting marketing initiatives, events, and administrative functions.
Overview
Hybrid schedule with a combination of remote and on-site work in Waller, TXSupport the Marketing department with day-to-day administrative and marketing activitiesAssist with scheduling and coordinating social media contentSupport conference planning, vendor coordination, and event logisticsHelp prepare marketing collateral and maintain brand consistency across digital and print materialsAssist with weekly reporting, marketing analytics, and budget/spend trackingPerform general administrative duties as assignedQualifications
Student or recent graduate pursuing or holding a degree in Marketing, Communications, Business, or a related field preferredPrevious administrative or marketing internship experience is a plusFamiliarity with social media platformsExperience using Canva or similar graphic design softwareStrong organizational and time management skillsExcellent written and verbal communication skillsDetail-oriented with the ability to manage multiple prioritiesProficient with Microsoft Office (Word, Excel, Outlook, PowerPoint)Reliable transportation for required office daysAbility to successfully pass a background check and pre-employment drug screen Read LessNew Tech Global Staffing is currently seeking a Body shop Painter for a client located in Conroe, TX to join our team. This is a contract-to-hire opportunity.
Pay: $22.00 – $24.00 per hour (based on experience)
Schedule: First Shift – Monday through Friday (Daytime Hours)
Job Type: Temp-to-Hire Opportunity
Summary:
Responsible for preparing and painting vehicles or industrial equipment to restore them to pre-accident condition or enhance their appearance. This role requires expertise in surface preparation, color matching, and the use of various painting tools and techniques.
Responsibilities:
Prepare surfaces for painting by sanding, masking, and priming.Mix and match paint colors to ensure accurate application.Apply paint using spray guns and other equipment in a controlled environment.Inspect finished work for quality and ensure it meets industry standards.Maintain a clean and organized work area, including paint booths and tools.Follow safety procedures and wear appropriate protective equipment.Collaborate with technicians and estimators to ensure timely completion of work.Perform touch-ups and refinishing as needed.Qualifications:
High School Diploma or equivalent.Minimum 2 years of experience in automotive or industrial painting.Proficiency with spray guns, sanding tools, and paint mixing systems.Strong attention to detail and commitment to quality.Ability to work independently and as part of a team.Familiarity with safety and environmental regulations related to painting.ASE or I-CAR certification is a plus.Physical Requirements:
Ability to stand, bend, and lift for extended periods.Capable of lifting up to 50 lbs.Comfortable working in a paint booth environment with protective gear. Read LessNew Tech Global Staffing is currently seeking a Facilities Technician for a client located in Conroe, TX to join our team. This is a contract opportunity.
Pay:
$21.00 - $23.00 per hour depending on experience
Schedule:
Monday through Friday, 40 hours/week from 6:00am - 2:30pm
Summary:
Responsible for performing maintenance and upkeep of a large manufacturing facility, including troubleshooting equipment and building system issues, conducting preventative maintenance, supporting equipment installations, and maintaining facility grounds to ensure safe and efficient operations.
Responsibilities
· Follow all established safety protocols, including Lockout/Tagout (LOTO) and Job Safety Analysis (JSA) requirements
· Perform routine preventative, predictive, and corrective (reactionary) maintenance on equipment and facility systems
· Assist with troubleshooting equipment issues and perform repairs as required
· Conduct required inspections as directed by the Facilities Manager or Supervisor
· Perform work-at-height activities in compliance with JSA and Permit-to-Work procedures
· Assist with sea container loading and unloading
· Support heavy lift activities for equipment and materials
· Maintain cleanliness of facility shop areas and assist with housekeeping
· Maintain facility grounds and surrounding greenbelt areas
· Work collaboratively with all departments as needed
· Interact with customers, guests, and vendors in a professional manner
· Perform other duties as assigned by the Facilities Manager or Supervisor
Qualifications
· High School Diploma or equivalent required
· Minimum of 2 years of relevant maintenance experience or equivalent
· Basic knowledge of preventative, predictive, and corrective maintenance practices
· Good English communication skills
· Familiarity with office software (Microsoft Office or similar)
· Ability to lift and carry up to 40 lbs
· Ability to work independently and as part of a team
· Strong problem-solving and analytical skills
· Good communication and coordination skills
· Self-motivated, dependable, and detail-oriented
· High level of integrity, accountability, and professionalism
· Willingness to share knowledge and support team members
· Strong sense of service and confidentiality
· Process-oriented with a results-driven mindset
Read LessNew Tech Global Staffing is currently seeking a Test Technician for a client located in Conroe, TX to join our team. This is a contract-to-hire opportunity.
Pay: $20 to $23/hour
Schedule: Monday through Friday, 40 hours/week
The Test Technician will be responsible for executing testing procedures and preparations for generator group products. This role ensures all testing is completed accurately, safely, and in compliance with company standards. Responsibilities include maintaining a clean and organized work area, performing daily and weekly maintenance on testing benches, supporting root cause analysis and corrective actions, executing generator testing programs, monitoring and requesting test consumables, reporting equipment failures, preparing detailed test reports, ensuring product traceability, and properly using and maintaining equipment and materials. The technician will also complete tasks assigned by supervisors, participate in training seminars, share feedback with section chiefs, and comply with all Quality, Environmental, and Occupational Health & Safety (OHS) rules. Participation in OHS training and risk reduction initiatives is expected.
Qualifications:
High School Diploma required (technical education preferred), with 1 to 12 years of relevant experience.
Candidates should have technical electrical knowledge, experience in coupling and assembly, strong relationship management and self-development skills, good English communication, and familiarity with office software and basic programming.
Ideal candidates will be detail-oriented, collaborative, service-focused, and possess strong problem-solving, analytical, and communication skills.
Overview
Pay is $25 plus depending on experience
Key Responsibilities
Process customer inquiries and sales orders in a timely manner.Identify customer parts and product requirements.Generate and manage sales orders received via phone, email, and other communication channels.Monitor the flow of documentation and products to ensure timely receipt and shipment.Coordinate closely with warehouse personnel regarding order status and fulfillment.Follow up on orders and provide customers with status updates.Prepare shipping documentation and ensure accuracy of order-related paperwork.Maintain organized order files and records in accordance with company procedures.Work collaboratively with customers, vendors, freight providers, and internal departments.Assist with inventory-related activities, including cycle counts and inventory control.Support warehouse operations, including receiving, picking, packing, labeling, and shipping activities.Participate in warehouse inspections, investigations, and safety initiatives.Maintain compliance with company policies, procedures, and safety standards.Perform additional duties as assigned.Qualifications
High School Diploma or GED.Minimum of 2 years of customer service experience.Minimum of 2 years of sales support or inside sales experience.Minimum of 2 years of warehouse experience.Proficiency with Microsoft Office applications.Strong verbal and written communication skills.Ability to multitask and manage competing priorities.Strong attention to detail and organizational skills.Ability to lift up to 50 pounds.Ability to work overtime as needed.ERP system experience (SAP, Oracle, or similar) preferred.Previous forklift operating experience preferred.Experience reading and interpreting drawings or prints preferred.Experience in industrial, manufacturing, distribution, or warehouse environments preferred.Skills & Competencies
Customer-focused mindset.Strong problem-solving abilities.Excellent organizational and time management skills.Team-oriented approach.Ability to work independently with minimal supervision.Mechanical aptitude preferred.Quick learner with a positive attitude.Strong commitment to accuracy and quality. Read LessMechanically inclined professional with hands-on experience in workshop and industrial environments. Responsible for the maintenance, repair, preparation, and inspection of downhole tools in both shop and field settings. Operates equipment such as forklifts and cranes safely and efficiently while following quality and safety procedures. Completes service documentation accurately, collaborates with supervisors and other departments, and ensures work is completed on time to meet production goals. Demonstrates strong written and verbal communication skills, attention to detail, and a commitment to maintaining a safe and organized work environment.
Read LessNew Tech Global Staffing is currently seeking a CNC Horizontal Boring Mill Operator for a client located in Tulsa, OK to join our team. This is a contract to hire opportunity.
Pay: $25.69
Schedule: 4:00 AM to 4:00 PM; overtime varies based on workload
Summary:
NOV Production and Midstream is seeking an experienced CNC Horizontal Boring Mill (HBM) Operator to support production operations. This role is responsible for machine setup, operation, and inspection of precision parts while maintaining strict quality and safety standards. The ideal candidate will have a strong mechanical aptitude, the ability to read blueprints, and experience with Fanuc controls in a heavy manufacturing environment.
Responsibilities
· Set up, operate, and inspect CNC Horizontal Boring Mill machines with minimal supervision
· Ensure production of high-quality parts within specified tolerances and efficiency standards
· Read and interpret blueprints, drawings, manuals, and specifications to determine machining requirements
· Measure and mark dimensions and reference points on materials or workpieces
· Monitor machining processes and adjust controls as needed to maintain quality standards
· Identify and report equipment malfunctions to supervisors
· Assist with troubleshooting production issues and supporting process improvements
· Operate forklifts and other lifting equipment to move parts safely
· Communicate effectively with supervisors, engineers, quality, and production teams
· Maintain a clean and organized work area and perform basic preventative maintenance
· Follow all company health, safety, and environmental policies and procedures
· Support team objectives and complete additional duties as assigned
Qualifications
· High School Diploma or GED required
· Minimum 3–5 years of CNC HBM machining experience in a heavy manufacturing environment
· Minimum 3–5 years of experience with Fanuc controls
· Ability to create own machine setups
· Strong blueprint reading skills with advanced understanding of GD&T
· Experience using precision measuring instruments (calipers, ID/OD micrometers, depth gauges, indicators, etc.)
· Knowledge of cutting tools, inserts, boring bars, and tool holders
· Forklift experience required
· Strong mechanical aptitude and attention to detail
· Basic math skills including geometry and algebra
· Strong communication and interpersonal skills
· Ability to work independently and in a team environment
· Willingness to learn, adapt, and cross-train
Requirements
· Must be able to pass a drug screen and background check
· Must be available to start immediately if selected
· Ability to multitask in a fast-paced manufacturing environment
· Ability to stand, walk, bend, and perform repetitive movements up to 12 hours per day
· Comfortable working in a factory environment with varying temperatures
· Reliable with strong attendance and punctuality
New Tech Global Staffing is currently seeking a Warehouse Coordinator for a client located in Port Arthur, TX to join our team. This is a contract-to-hire opportunity.
Pay: $22–$23/hour
Schedule: Monday through Friday 40 hours/week from 7:00 AM to 4:00 PM
Summary:
Responsible for overseeing day-to-day warehouse operations, ensuring efficient and safe storage, handling, and distribution of materials. Supports inventory accuracy, coordinates shipments, and provides timely delivery of materials to internal and external customers.
Responsibilities
· Transfer materials, equipment, parts, and supplies manually or using warehouse equipment
· Receive, inspect, and store incoming goods according to company standards
· Schedule and coordinate deliveries and pickups to ensure timely and accurate fulfillment
· Maintain inventory records, logs, shortage reports, and other documentation
· Perform cycle counts and assist with inventory audits
· Locate shortages and transfer materials to maintain inventory accuracy
· Operate forklifts, pallet jacks, hand trucks, and other material handling equipment
· Safely operate company vehicles to deliver materials as needed
· Maintain a clean, organized, and safe work environment
· Provide materials to production teams and customers in a timely manner
· Assist with spare inventory tracking and equipment repair coordination
· Support continuous improvement of warehouse processes
· Other duties may be assigned
Qualifications
· High School Diploma or GED required
· 2–4 years of warehouse or material handling experience
· Prior forklift experience required (certification preferred or willingness to obtain)
· Valid Driver’s License required
· TWIC Card required
· Basic Microsoft Office skills, including Excel
· Ability to lift up to 50 lbs frequently
· Ability to work in a warehouse or non-climate-controlled environment
· Strong organizational skills and attention to detail
· Ability to adapt to changes in a fast-paced environment
· Strong verbal communication skills
· Ability to work independently and as part of a team
· Willingness to wear required PPE and steel-toe boots (provided if needed)
· Must pass pre-employment physical
Read Less