About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Laminator
Classification: Non-Exempt
Reports To: Lamination Manager/Supervisor
Job Description: Lamination/Gunrunner/FRP - Applies and rolls initial layers of fiberglass and resin to hulls and decks. Applies and rolls fiberglass and resin to hulls and inserts metal reinforcing pieces.
Key Responsibilities:
• Identify the different hulls and decks that are to be laminated.
• Use rollers, brushes, and fiberglass guns.
• Eliminate bubbles in fiberglass once it has been applied.
• Use small hand tools, including scissors, razors knife, etc.
• Light sanding and grinding of parts when necessary.
• Must be flexible and willing to cross-train within the department.
• Keep the work area clean and orderly.
• Follow instructions of the Manager/Supervisor/Lead
• Inspects all parts so that they are complete and up to quality standards.
• Any other duties as assigned by management.
• Must comply with all OSHA and safety procedures.
Skills and abilities for success in this position:
• Give full attention to what other people are saying, take time to understand the points being made, and ask questions as appropriate.
• Understand written sentences and paragraphs in work-related documents.
• Manage one’s own time and respect the time of others.
• Consider the relative costs and benefits of potential actions to choose the most appropriate one.
• Must be able to work effectively individually or with a team.
• Must be able to perform tasks under time pressure deadlines.
• Must have strong attention to detail.
• The ability to communicate information and ideas so others will understand.
• The ability to tell when something is wrong or is likely to go wrong.
Tools used in this occupation include but are not limited to:
• Personal Protective Equipment- Safety Glasses, half-mask respirator, Tyvek protection suit.
• Hand Tools- Rollers, Fiberglass chop gun, sanders, and scissors.
• Working directly with fiberglass and resin.
• Be able to use and maintain a variety of hand tools.
Knowledge, Education, and Experience include but are not limited to the following:
• Must be able to work effectively individually or with a team. Be able to use and maintain a variety of hand tools.
• Some Knowledge of FRP and composites
• Be able to complete basic installations.
• Knowledge of production processes and quality control.
Physical Requirements:
• Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.
• Must be able to bend at the waist and knees and stand for extended periods.
• Must be able to see and identify small quality defects.
• Position requires repetitive arm, hand, and shoulder movements.
• Fine motor skills required for multiple tasks.
• Must be able to climb into and out of the interior of boats.
• Must be able to wear proper safety equipment, including a respirator when necessary.
• Must be able to lift 50 pounds when necessary.
• This is a safety-sensitive position.
Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Upholsterer
Classification: Non-Exempt
Reports To: Upholstery Manager/Supervisor
Revision Date: July 2023
Job Description: Upholsterer attaches vinyl coverings onto the proper parts before being installed in the boats.
Duties and Responsibilities:
Using a screw gun, installs bolts into pre-drilled holes and tighten them down. Inspects skins for defects, trims, excess threads, and vinyl. Places skins over parts and aligns stripes. Pull vinyl tight over part and staples around edges, making sure that edges and stripes stay aligned. Finish with screen and hem when necessary. Inspects all parts after production to ensure that all parts are complete and up to quality standards. Keep the work area clean and orderly. Any other duties as assigned by management. Follow the instruction of the Manager/Supervisor/LeadInspects all parts to be complete and up to quality standards. Must comply with all OSHA and safety procedures.Skills and abilities for success in this position:
Give full attention to what others are saying, taking time to understand the points being made and asking questions as appropriate.Understand written sentences and paragraphs in work-related documents.Manage one’s own time and respect the time of others.Consider the relative costs and benefits of potential actions to choose the most appropriate one.Must be able to work effectively individually or with a team.Must be able to perform tasks under time pressure deadlines.Must have strong attention to detail.The ability to communicate information and ideas so others will understand.The ability to tell when something is wrong or is likely to go wrong. Must be able to perform tasks under time pressure deadlines.Must have strong attention to detail.Tools used in this occupation include but are not limited to:
Personal Protective Equipment- Safety Glasses, half-mask respirator when spraying glue.Hand Tools- foam knives, razor knives, drills, hole saws, scissors, heat gun, staple gun, steamer.Knowledge, Education, and Experience but not limited to:
Must be able to use and maintain hand tools such as foam knives, razor knives, drills, hole saws, etc.Must be able to identify different boat model parts.Must be able to help unload supply trucks.Follow the instruction of the Supervisor/foreman/lead.Must have good hand-eye – coordination.Must be able to repair damaged parts when necessary.Be able to read orders and identify parts that are needed to maintain the production schedule.Knowledge of production processes and quality control.Must be able to work effectively individually or with a team.Keep the work area clean and orderly.Inspects all parts so that they are complete and up to quality standards. Any other duties as assigned by management.Physical Requirements:
Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.Must be able to bend at the waist and knees and stand for extended periods.Must be able to climb into and out of the interior of boats.Must be able to wear proper safety equipment, including a respirator when necessary.Must be able to lift 50 pounds when necessary.This is a safety-sensitive position.The ability to see details at close range.Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)This is a safety-sensitive position.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Advance Composite Wing Lead
Classification: Non-Exempt
Reports to: Department Manager/Supervisor
Job Description: Directly responsible for assisting in the daily operations of our production departments. Meeting facility goals regarding safety, quality, and on-time delivery of products from one department to the next.
Key Responsibilities:
Drive the daily operational duties of the department to meet production demand. Maintains standardized methods of operation for the department.Facilitate the flow of communication between managers and down to employees concerning matters of importance. Participate in implementing new manufacturing processes, products, and systems technology to meet operational goals.Coordinate the delivery and disposal of chemicals and supplies.Work to achieve a “zero defect” in manufacturing operations, keeping delinquencies at or below the facility goal.Participate in employment-related issues concerning hiring, training, appraising, or counseling as appropriate; escalate issues to the next leadership level when appropriate.Support all safety initiatives and maintain a high awareness of safety in the facility. Complies with all OSHA and safety procedures.Sets an example of positive behaviors expected from team members.Any other duties as assigned by management.Interacts with the management of hazardous waste throughout the facility and understand that they must comply with Safety and Environmental compliance with the requirements of applicable portions of CFR 40 (Resource Conservation Recovery Act) for handling of Hazardous Waste. They have been provided RCRA and Department of Transportation (initially and annually) training to ensure understanding and conformance with handling and offering of hazardous waste. Daily activities include, but are not limited to, puncturing aerosol cans into Hazardous waste satellite approved containers, picking up satellite hazardous waste throughout the facility to bring to the 90-day hazardous waste accumulation center. Loading hazardous waste to the approved Treatment and Storage carrier/truck in accordance with CFR 49.”Skills and abilities for success in this position:
Effective problem-solving, team, and interpersonal skills used to influence others to accomplish identified objectives. Read and understand product orders to ensure proper construction. Ability to juggle and manage competing tasks and demands and deal with frequent changes, delays, or unexpected events.Maintain a positive work atmosphere and interaction with customers, co-workers, and management.· Ability to handle emergencies calmly.· Able to be flexible concerning the work schedule.Keep the work area clean and orderly.Follows the instruction of the Manager/SupervisorKnowledge, Education, and or Experience required:
3-5 years' experience in a manufacturing environment Previous leadership experience desirableWorking knowledge of all processes and procedures required to perform all functions within the department.Proficiency in Microsoft Office products required.Physical Requirements:
Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally.Must be able to bend at the waist and knees and stand for extended periods.Must be able to lift 25 pounds when necessary.This is a safety-sensitive position.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Small Parts Gel Coater
The Small Parts Gel Coat reports to the Supervisor.
Responsible for preparing molds and applying gel coats to fiberglass boats according to production specifications and quality standards.
This position embodies and champions the core values, standards, and guiding philosophies of Nautique Boat Company, ensuring their consistent application across all duties and organizational initiatives.
KEY RESPONSIBILITIES- Essential Functions
1. Spray gelcoat according to production specifications, ensuring proper film thickness (mil thickness) and color application based on work orders.
2. Read and interpret production orders to determine the correct gelcoat color and application requirements.
3. Apply hull and deck identification numbers in the designated locations.
4. Stock and maintain gelcoat materials and supplies.
5. Clean and maintain spray equipment, filters, and pumps at required intervals.
6. Tape, wrap, and prepare molds for gelcoat application.
7. Identify the various gelcoat applications required.
8. Inspect completed parts to ensure they meet quality standards and production specifications.
9. Maintain a clean, safe, and organized work area.
10. Follow all instructions provided by the Supervisor, Foreman, or Team Lead.
11. Work effectively as part of a team to complete daily production goals.
12. Safely use small hand tools, including scissors, utility knives, razors, and similar tools.
13. Wear required personal protective equipment (PPE), including a full-face respirator, while performing assigned duties.
14. Perform other related duties as assigned by management.
This job description is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee. Management reserves the right to modify, add, or remove duties and responsibilities at any time, with or without notice.
KEY JOB REQUIREMENTS
Formal Education:
High School Diploma or GED required.
Work Experience:
1 years to < 2 years of related experience in maintenance or related field
Decision Making:
Basic: Ongoing supervision is provided on a regular basis. Desired results are clearly defined; however, some independent judgment is necessary to select and apply the most appropriate procedures to achieve those results.
Problem Solving:
Problems are generally standard/routine in nature. Answers are usually found by selecting from specific choices defined in standard work policies or procedures.
Responsibility for Directing Others:
Involves no responsibility or authority for the direction of others
Planning Level:
Daily: Seldom plan beyond the current day.
Internal Contacts:
Requires regular contact within the department and ongoing contact with other departments, supplying, or gathering information.
External Contacts:
External communication with others is minimal. Requires ordinary tact and courtesy.
Job-Related Knowledge:
Basic Employment Skills: Requires basic skills to understand instructions and
perform simple, routine tasks. Required proficiency in the use of basic hand tools
and equipment, with knowledge of quality control processes and safe forklift
operation.
Required Licenses, Certifications, Registrations:
Must be a licensed driver with a safe driving record, subject to MVR.
Special Skills:
Ability to work effectively individually or with a team, perform tasks under time-pressure deadlines, communicate work-related information clearly, and identify when work quality does not meet expected standards.
Working Conditions/Physical Effort:
Non-climate-controlled factory environment where ambient air temperature can exceed outside air temperature, with exposure to weather conditions, moderate noise, fiberglass, dust, resin, and other designated factory-area conditions.
Standing, bending at the waist and knees, repetitive arm, hand, and shoulder movements, and climbing into and out of boat interiors for extended periods.
Fine motor skills and visual acuity required for multiple tasks, including use of hand tools (grinder, scraper, gel gun, razor knife, blower, etc.)
equipment and the ability to see and identify small quality defects.
Ability to lift 50 pounds when necessary.
Requires proper safety equipment, including safety glasses, half-mask respirator, Tyvek protection suit, and other PPE as required.
Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Small Parts Patch & Polish Technician
Classification: Non-Exempt
Reports To: Small Parts Supervisor
Job Description: Checks and fills hulls after the grinding process to ensure water tightness. Install side and bottom sound-dampening material and apply a thick coat of paint to the bilge area where required.
Duties and Responsibilities:
Identify and correct imperfections in the gel coat. Gel Coat and repair are required.Use orbital sander, buffer, die grinder, polishing compounds, etc.Keep the work area clean and orderly.Work with a team to complete daily tasks· Follow instructions of the Manager/Supervisor/lead.
· Must comply with all OSHA and safety procedures.
· Flexible work hours.
· Crosstrain within the department
Skills and abilities for success in this position:
Give full attention to what others are saying, taking time to understand the points being made and asking questions as appropriate.Understand written sentences and paragraphs in work-related documents.Manage one’s own time and respect the time of others.Consider the relative costs and benefits of potential actions to choose the most appropriate one.Must be able to work effectively individually or with a team.Must be able to perform tasks under time pressure deadlines.Must have strong attention to detail.The ability to communicate information and ideas so others will understand.The ability to tell when something is wrong or is likely to go wrong. May be required to drive a forklift.Physical and Work Requirements:
Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.Must be able to bend at the waist and knees and stand for extended periods.Must be able to climb into and out of the interior of boats.Must be able to wear proper safety equipment as needed.Must be able to lift 50 pounds when necessary.The ability to see details at close range.Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)This is a safety-sensitive position.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Grinder
Classification: Non-Exempt
Job Description: Grinds edges off de-molded parts and inside of hulls—also cuts and drills necessary holes in hulls and decks.
Duties and Responsibilities:
Grind all de-molded parts properly (hulls, decks, small parts).Lift deck parts with the help of other employees and move to the cut & gear area.Keep the work area clean and orderly.Follow instructions of the Manager/Supervisor/Lead· Inspects all parts to be complete and up to quality standards.
· Any other duties as assigned by management.
· Must comply with all OSHA and safety procedures.
· Must be able to wear a respirator, goggles, and hearing protection.
Skills and abilities for success in this position:
Give full attention to what others are saying, taking time to understand the points being made and asking questions as appropriate.Understand written sentences and paragraphs in work-related documents.Manage one’s own time and respect the time of others.Consider the relative costs and benefits of potential actions to choose the most appropriate one.Must be able to work effectively individually or with a team.Must be able to perform tasks under time pressure deadlines.Must have strong attention to detail.The ability to communicate information and ideas so others will understand.The ability to tell when something is wrong or is likely to go wrong.Tools used in this occupation include but are not limited to:
· Personal Protective Equipment- Safety Glasses may need a half-mask, dust/mist respirator, and Tyvek protection suit.
· Hand Tools- Rollers, sanders, buffers, screwdrivers, drills, razor knives, and scissors.
· Working directly with fiberglass, resin, and gel coat.
· Be able to use small hand tools (grinder, scraper, razor knife, blower, diamond cutter, hole saws, etc.)
Physical Requirements:
· Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.
· Must be able to bend at the waist and knees and stand for extended periods.
· Must be able to climb into and out of the interior of boats.
· Must be able to wear proper safety equipment as needed.
· Must be able to lift 50 pounds when necessary.
The ability to see details at close range.Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Small Parts Tech
Classification: Non-Exempt
Reports To: Small Parts Manager
Job Description: Small Parts-Assists in the construction and preparation of small parts, which may require infusion molding, waxing, cleaning, inspecting, cutting fiberglass, and maintaining molds, as well as drilling necessary holes, laminate, sand, and buff.
Duties and Responsibilities:
Responsible for receiving and prepping the mold for infusion. Requires buffing and laying pre-cut Fiberglass onto the mold to make it ready for cutting.Responsible for securing fiberglass and cutting to fit the pre-cut fiberglass to ensure proper distribution and covering of mold is complete.Responsible for ensuring molds are gel coated properly and ready for infusion.Responsible for making sure the part is ready to move on to production.Be able to eliminate bubbles in fiberglass once it has been applied.Follow instructions of the Supervisor/foreman/leadBe able to use small hand tools, including scissors, razors, knives, etc.Keep the work area clean and orderly.Work with a team to complete daily tasks.Light sanding of parts when necessary.· Inspects all parts so that they are complete and up to quality standards.
· Any other duties as assigned by management.
· Must comply with all OSHA and safety procedures.
Skills and abilities for success in this position:
Give full attention to what others are saying, taking time to understand the points being made and asking questions as appropriate.Understand written sentences and paragraphs in work-related documents.Manage one’s own time and respect the time of others.Consider the relative costs and benefits of potential actions to choose the most appropriate one.Must be able to work effectively as an individual or with a team.Must be able to perform tasks under time pressure deadlines.Must have strong attention to detail.The ability to communicate information and ideas so others will understand.The ability to tell when something is wrong or is likely to go wrong.Tools used in this occupation include but are not limited to:
· Personal Protective Equipment- Safety Glasses, protective apron, and may need a half-mask or dust/mist respirator.
· Hand Tools- Rollers, sanders, and scissors.
· Working directly with fiberglass, resin, and gel coat.
Knowledge, Education, and Experience includes but is not limited to:
Be able to drive a forklift.Must be able to inspect and identify defects or damage to molds.Follow instructions of the Supervisor/foreman/lead.Must be able to wear a respirator.Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc).Knowledge of production processes and quality control.Active Listening- Give full attention to what other people are saying, take time to understand the points being made, and ask questions as appropriate.Reading Comprehension - Understand written sentences and paragraphs in work-related documents.Speaking – Talking to others to convey information effectively.Time Management- Manage one’s own time and respect the time of others.Judgment and Decision Making- Consider the relative costs and benefits of potential actions to choose the most appropriate one.Must be able to work effectively as an individual or with a team.Physical and Work Requirements:
Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature.Must be able to bend at the waist and knees and stand for extended periods.Must be able to climb into and out of the interior of boats.· Must be able to wear proper safety equipment as needed.Must be able to lift 50 pounds when necessary.The ability to see details at close range.Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Description: Reporting to Manufacturing Engineering Manager, the Mechanical Engineer is a hands-on, production-focused contributor responsible for delivering production-ready CAD models, Drawings, and manufacturing documentation. This role bridges engineering and operations, ensuring designs are translated into efficient, repeatable, high-quality manufacturing processes.
Key Responsibilities:
Own the end-to-end integration of CAD designs and parts from engineering release through production execution. Release and maintain revision-controlled CAD files ensuring alignment with engineering intent, tolerances, and full production traceability. Validate product geometry, toolpaths, nesting strategies, and material orientation prior to production release. Define, maintain, and improve SOPs, work instructions, setup sheets, and tooling standards. Ensure repeatability and traceability across shifts and operators. Lead first-article validation, prototyping runs, and production ramp-ups for new and revised designs. Evaluate part manufacturability, scalability, and compatibility with existing CNC equipment and processes. Ensure Designs and parts meet engineering specifications and fit, form, and function requirements; provide manufacturing-driven feedback and redlines to Product Development and Design. Create CAD models, drawings, and templates following standards. Create and maintain optimized, production-ready nested cut files for CNC departments. Manage production file lifecycle including new model year carryover and transition of obsolete files to Service Parts. Provide manufacturing engineering deliverables including BOM input, controlled engineering drawings, visual aids, templates, and standardized tools required to support operations and production execution. Drive continuous improvement initiatives focused on process efficiency, material utilization, and waste reduction. Collaborate cross-functionally with Engineering, Quality, and Operations, to resolve production issues and support new product integration. Support implementation of new processes, equipment, and products. Spend 50% or more time on the production floor providing hands-on support and troubleshooting operations and manufacturing issues. Requirements:Skills and abilities for success in this position:
Strong knowledge of CNC cutting processes, tooling, feeds/speeds, and machine capabilities. Proficiency creating, reviewing and validating engineering drawings, CAD/CAM files, toolpaths, and nested cut programs. Ability to assess part manufacturability, scalability, and production readiness. Solid understanding of engineering drawings, tolerances, and GD&T. Experience with revision control, PDM systems, and controlled file release Hands-on production-floor problem-solving and troubleshooting capability Ability to lead first-article validation and support prototyping and production ramp-ups. Skilled in developing and maintaining SOPs, work instructions, and setup documentation. Ability to use production data to drive process improvements Ability to provide clear visual aids and standardized tools for operators Comfortable spending significant time on the production floor supporting operations Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization. Strong organizational skills for managing Design file lifecycles and documentation Strong root-cause analysis and continuous improvement mindset Demonstrated ability to exercise sound judgment, set priorities, meet deadlines, and make independent decisions within the scope of responsibility with minimal supervision. Capability to monitor CNC equipment operation and perform product and process inspections to ensure quality and compliance with specifications. Strong CAD proficiency to analyze, organize, and prepare CNC-ready files using formats and platforms such as DWG, DXF, AutoCAD, Rhino, SolidWorks, V-Carve, etc. Working knowledge of sheet metal manufacturing, including flat pattern development, bend allowances, tolerances, and CNC cutting processes. Ability to maintain a positive, professional working relationship with operators, engineers, leadership, and internal customers. Ability to handle emergencies calmly.Knowledge, Education, and/or Experience Required:
Four (4) years of post-secondary education with a focus on technology, engineering, or manufacturing. Five (5) years of relevant work experience. Demonstrated understanding of Design for Manufacturing and Assembly (DFMA). Demonstrated knowledge of OSHA safety standards. Demonstrated knowledge of ANSI drawing standards. Must have knowledge of raw materials, production processes, QC, costs, and other techniques for maximizing the effective manufacture of products. Strong lean manufacturing experience especially in continuous improvement, Lean Six Sigma, elimination of waste, 5S, Kaizen events, and visual managementPhysical Requirements:
Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at the waist and knees and stand for extended periods of time. Must be able to lift 40 pounds when necessary. Must be able to wear PPE as required. This is a safety-sensitive position.Additional Requirements:
A Motor Vehicle Record Report (MVR) in good standing.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Read LessAbout Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand.
Job Title: Assembler Line 1
Department: Assembly
Classification: Non-Exempt
Reports To: Assembly Supervisor
Revision Date: June 2023
Job Description: The Assembler is responsible for assembling parts onto the boat according to the order specifications, utilizing correct tools and methods to ensure proper installation and meet quality standards.
Duties and Responsibilities:
Assemble the boat's hull and deck components.Follow a sequential process while completing tasks such as carpet installation, transom hardware, bilge equipment, ballast tanks, deck wiring, deck hardware, stereo, and helm assemblies.Adhere to pre-determined roll times on the assembly line.Utilize a variety of hand tools, including tape measures, razor knives, screw guns, drills, and ratchets.Collaborate with the team to complete daily tasks.Maintain cleanliness and organization in the work area.Inspect all parts to ensure completion and adherence to quality standards. Comply with all OSHA and safety procedures.Follow instructions provided by the Manager, Supervisor, or Lead.Perform any additional duties assigned by management.Skills and Abilities for Success in this Position:
Exhibit strong attention to detail.Comprehend written sentences and paragraphs in work-related documents.Detect potential issues or errors before they occur.Communicate information and ideas clearly for others to understand.Work effectively both independently and as part of a team.Manage time effectively and respect others' time.Demonstrate active listening skills, seeking clarification when necessary.Perform tasks under time-pressure deadlines.Assess the relative costs and benefits of potential actions to make appropriate decisions.Physical and Work Requirements:
Ability to work in a non-climate-controlled environment with varying ambient air temperatures.Flexibility to bend at the waist and knees and stand for extended periods.Capability to climb in and out of the interior of boats.Willingness to wear necessary safety equipment as required.Competence in using and maintaining small hand tools, such as grinders, scrapers, razor knives, and blowers.Physical ability to lift up to 50 pounds when necessary.Ability to perceive small details at close range.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations
Requirements:About Nautique Boat Company
With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world’s finest ski and wake boats. Since 1925, we’ve led the marine industry through innovation, superior craftsmanship, and a dedication to quality.
Beyond our boats, we’re driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Learn more at www.nautique.com.
Summary:
The Quality Control Technician – Water Testing conducts on-water and in-process production testing of boats to ensure all systems meet quality, safety, and performance standards prior to customer delivery. Verifies product functionality, identifies defects, documents testing results, and ensures each vessel meets Nautique’s performance and craftsmanship expectations.
KEY RESPONSIBILITIES:
Performs on-water testing of completed boats to verify performance, handling, and system functionality.Executes standardized test procedures for engine performance, steering and control systems, ballast and surf systems, and electrical and electronic systems.Conducts pre-water and post-water test inspections to identify cosmetic, mechanical, and functional defects.Verifies completion of required production and quality checks prior to release to the next operation.Accurately documents issues found during testing and enters defects into quality systems with clear descriptions and supporting details.Tags and escalates nonconforming boats or systems according to company quality procedures.Performs basic troubleshooting of boat systems when issues are identified and re-tests boats after repairs to verify corrective actions are effective.Works closely with Design and Development, Production, and other Quality teams to support issue resolution and product quality.Follows company safety procedures, environmental requirements, and applicable waterway regulations, and provides feedback on recurring issues or trends observed during testing.Performs similar or related duties as assigned.Requirements:KEY JOB REQUIREMENTS:
High School Diploma or GED required. Vocational or other technical school, certification, training or apprenticeship required beyond high school preferred 5 years to 7 years of mechanical experience in marine and/or automotive industry required. Formal Technical/Vocational Skills: Requires specialized technical or trade knowledge, usually gained through formal training or certification, and the ability to apply it within established guidelines.Required knowledge includes boat operation and on-water testing procedures; engine performance, steering and control systems, ballast and surf systems, electrical and electronic systems, quality inspection practices, basic troubleshooting, defect identification and documentation, safety procedures, environmental and waterway requirements, and the ability to verify repairs and corrective actions. Must successfully complete a state-approved boating safety course, meet applicable Florida boating safety requirements for operating a motorized vessel, and successfully pass the company-required boat operation evaluationMust be a licensed driver with a good driving record, subject to MVR Ability to operate boats safely and confidentlyStrong mechanical and troubleshooting skillsStrong attention to detail and documentation accuracyEffective communication, teamwork, accountability, and safety awarenessWORKING CONDITIONS:
Outdoor work environment, including lake and dock areas, in varying weather conditions, with exposure to water, noise, marine equipment, slippery or uneven surfaces, and wildlife commonly found around lake environments. Employees are required to follow all safety guidelines and maintain situational awareness at all times.Requires standing, walking, bending, stooping, climbing, lifting, and physical effort related to boat loading, hauling, and handling, including positioning, securing, and moving vessels as needed throughout the workday.Work may occur in or around water, and swimming may be required to successfully perform certain job functions.Equal Employment Opportunity Statement
Nautique Boat Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.
Americans with Disabilities Act (ADA) Statement
Nautique Boat Company is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of a position, unless doing so would create an undue hardship. Nautique Boat Company engages in an interactive process with applicants and employees to identify reasonable accommodations.
Read Less