POSITION SUMMARY:
Operates an Amada turret to punch parts from various sizes of Sheet metal. Installs tooling in the punch head, inserts steel into the turret, cycles machine, removes processed sheet from the turret, separates scrap from good parts, deburrs parts using grinder or file, and detects malfunctions in machine operations such as worn or damaged cutting tools.
QUALIFICATIONS:
• Ability to perform essential duties
• High School Diploma/GED
• Six months machine operating experience
• Prior mechanic experience helpful
ESSENTIAL RESPONSIBILITIES/DUTIES:
This is not a comprehensive listing of all functions and duties performed by employees of this class; employees may be assigned duties which are not listed below; reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment contract and is subject to change at any time by the employer.
• Must be able to read and interpret blueprint drawings, follow routers and use simple math to perform basic calculations.
• Install tooling in the punch head as specified by work order, set-up and operate computer numerical control to punch parts.
• Must be able to insert a sheet of steel into the turret from a worktable that is waist/chest high. The weight of the sheet varies from 60 pounds up to 163 pounds. An operator may handle 25 up to 50 sheets per day.
• Must be able to remove the processed sheet from the turret by pulling it onto a second worktable.
• Must be able to break the attached tabs using a file, lift the edge of the processed sheet and shake to separate parts from the scrap metal.
• Performs inspection of parts, de-burrs and removes tabs.
• Must be able to change material on worktable as needed. The worktable is on wheels and requires the operator to roll the table out a few feet to be loaded by forklift. Empty table will weigh approximately 300 pounds.
• Complies with all quality policies, specifications, regulations and instructions.
• Update computer records and paperwork in accordance with production requirements.
• Performs preventative maintenance, lubricates and clean machines.
• Maintain work area in clean, orderly condition and follows prescribed safety procedures.
• Must have a working command of the English language and be able to communicate orally and in writing.
MARGINAL FUNCTIONS:
While the following tasks are necessary for the work of the department, they are not an essential part of the purpose of this position and may also be performed by other department members.
• Perform all other duties, as assigned.
Recruiters please do not contact us.
Company DescriptionEstablished in 1949, Mathews Industries is a leading contract–manufacturer and premier provider of Sheet Metal Products, fabricated Metal Products. Heating and Air Conditioning Equipment and Systems, and Accessories for commercial and industrial uses. We serve a wide-ranging customer-base including private, and corporate sector.
ELECTRO MECHANIC MAINTENANCE TECHNICIAN
This is a first shift position. Pay will be based upon skill level and experience.
Seeking an experienced maintenance employee who has a minimum of 8 years’ experience in trouble shooting and repairing plant equipment. Mechanical experience is a must and 480 electrical is required.
The standard shift will be Monday - Friday, working from 7:00 a.m. until 3:30 p.m. Overtime is available on an as needed basis.
Candidates must be self-starters, dependable and someone that can be trusted to work when no one is looking. Must have a valid driver’s license and be able to pass a drug screen and background check.
Qualifications: - MUST MEET ALL QUALIFICATIONS TO BE CONSIDERED
* Ability to perform essential duties
* High school diploma or equivalent
* Minimum of 8 years industrial maintenance mechanical/electrical experience
* Must have 480 electrical experiences
* Prior computer experience required
* Must pass a pre-employment drug screen and background check
In this role you will perform the following duties:
* Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numerical controls, power supplies, drives and forklifts, turrets, lasers, punch press, mills, lathes, paint line equipment, welders, press brakes.
* Provides emergency/unscheduled repairs of production equipment during production and performs scheduled preventative maintenance as directed.
* Must be able to read and interpret equipment manuals and work orders to perform required maintenance and service.
* Must be able to perform mechanical, electrical, plumbing and carpentry functions.
* Must be able to work beneath machines, in close quarters and at heights performing analysis and repair work.
* Must be able to order replacement parts and communicate effectively with outside service technicians.
* Keep Operations Manager advised of work status, workload, problems and progress as related to work assignments.
* Maintains equipment maintenance records (manual files and computer records).
* Installs, starts up and shuts down equipment in accordance with the Lockout requirements.
* Maintain work area and equipment in clean orderly condition and follow prescribed safety procedures.
* Trains operators in operation procedures for working safely with electrical/pneumatic tools and other equipment as directed.
* Work when scheduled and comply with the company attendance policy.
* Must be willing to work overtime as needed.
* Perform all other duties as assigned.
Physical Demands:
* The ability to stand, walk, drive, push, pull, reach overhead, and bend to the floor.
* Lift up to 50 pounds and exert force
Company DescriptionEstablished in 1949, Mathews Industries is a leading contract–manufacturer and premier provider of Sheet Metal Products, fabricated Metal Products. Heating and Air Conditioning Equipment and Systems, and Accessories for commercial and industrial uses. We serve a wide-ranging customer-base including private, and corporate sector.
Position Summary:
Supports production by accurately and efficiently completing quality related tasks.
Qualifications:
MUST BE ABLE TO WORK 1ST SHIFT OR 2ND SHIFT 7 AM - 1;30 PM OR 1:30-10PM
Minimum 2 years of experience in Quality Inspection/Control IN A MANUFACTURING SETTING
High School Diploma/GED
ESSENTIAL RESPONSIBILITIES/DUTIES:
·MUST HAVE SHEET METAL EXPERIENCE - MANUFACTURED ON A CNC PRESS MACHINE
· Must exhibit a cooperative and flexible attitude.
· Ability and willingness to work within deadlines consistently and with minimal supervision.
· Ability and willingness to apply judgment and discretion where appropriate.
· Must be able to act as a sounding board for Engineers and others prior to decisions. Suggest methods and layouts that result in improved production and workflow.
· Performs work with a constant awareness of improving processes necessary for growth.
· Communicates clearly and effectively both verbal and written.
· Performs first article inspections on sheet-metal parts and assemblies according to written procedures, plans and documents.
· Interprets engineering drawings and prints with multiple views to verify part/assembly compliance.
· Uses basic measurement tools to complete inspections (i.e. calipers, tapes, micrometers, pin/plug gages, blocks, indicators, surface plate, etc…)
· Performs receiving inspections on raw materials as required by established procedures.
· Maintains records of inspections and analysis completed using quality forms and documents.
· Verifies in-process audits are being performed and documented.
· Conducts Gage Repeatability & Reproducibility (GR&R) and correlations studies as required.
· Performs statistical analysis of data as required.
· Assists with calibration program by ensuring that all inspection gages are properly maintained, calibrated and in good working order.
· Assists in processing, developing and implementing corrective actions for the root cause of internal and external process failure modes.
· Performs key functions in daily, weekly and monthly non-conforming material process, including disposition and data collection.
· Assists with the internal quality system audit process and performs other duties as assigned.
· Follows and assists with implementation of all quality policies and procedures defined in the Matthews Industries Quality Policy Manual (QPM) as well as other company-initiated guidelines.
Company DescriptionEstablished in 1949, Mathews Industries is a leading contract–manufacturer and premier provider of Sheet Metal Products, fabricated Metal Products. Heating and Air Conditioning Equipment and Systems, and Accessories for commercial and industrial uses. We serve a wide-ranging customer-base including private, and corporate sector.