You will be in charge of the parts’ surface preparation. You will perform a mechanical shot blast of the entire wind tower section and a manual shot blast of the flanges to build a product that matches our high-quality standards.
RESPONSIBILITIES:As a Blaster – Wind Tower Finishing, you must be able to :
Prepare the booth for the arrival of the section: cleaning, identification, etc.Perform the assembly and disassembly of the mechanical equipment in the blast booth Perform a mechanical shot blast of the entire wind tower section and a manual shot blast of the flangesPerform visual inspection of the section (color, rust, or surface defects)Remove all particles after the section is blastedInspect the part using measuring tools (thickness, finishing surface)Complete the quality documentsMove different equipment using the overhead crane or forkliftPerform all other duties as assigned by the Production Supervisor.VALUED SKILLS :Manual DexterityDetail orientedSense of observationREQUIREMENTS :Must be able to :Wear a tight-fitting respirator and/or a blast suit and helmetClimb stairs and ladders; work at heightsLift and carry between 30-70lbHold hose with 125 lbs of pressureStand and walk for long periods of timeBend, kneel, squat, twist, reachWork above the shouldersTolerate exposure to weather, hot/cold environmentsASSETS:Relevant experience or training#marp2
You will operate a cutting machine with plasma or flame and bevel sides of steel plates using the beveling machine. This is the first step of building a tower section.
As a Cutting Table Operator, you must be able to :
Operate a cutting machine (plasma cutting table)Bevel all sides of steel plates using the beveling machinePosition steel plates on the cutting table using the vacuum plate lifterSafely operate the overhead crane (see requirement below)Remove scrap from the platesGrind the plates as neededVerify thickness, dimensions and quality of steel plate surfaceRecord information on the follow-up filesPerform all others duties as assigned to help out the crew VALUED SKILLS :Manual dexterity; Sense of observation;Detail oriented;Rigorously follow established procedures;Collaboration and team work REQUIREMENTS :Must have the ability to wear a tight-fitting respirator;Must be able to :Climb stairs and ladders; work at heightsLift and carry between 30-50 lbsStand and walk for long periods of timeBend, kneel, squat, twist, reachWork above shouldersPosition is required to operate an overhead crane. Vision must be correctable to 20/20, including peripheral and accurate perception of depth in order to fully view the crane while in operation and to ensure safe handling.Tolerate exposure to weather, hot/cold environmentsASSETS:Relevant experienceRelevant training#marp2
You will perform welding sequences in the manufacturing of parts, plan and prepare work of joints and welding, and apply different types of welding processes. You will work in collaboration with the technical team and supervisors to build a product that matches our high-quality standards.
This position is open on a night shift. Base pay starts at $25.25 plus additional $2/hour shift premium for night shift. Base pay increases with verified welding experience.
As a Welder Assembler- Wind Tower Fabrication, you must be able to:
Read and analyze blueprint and production documents Prepare work of joints and welding; select the right equipment, prepare the joints, perform the tracing and take measurementsPerform welding and assembly sequences in accordance with the welding processes (SAW, SMAW, GMAW, FCAW, Plasma Arc Gouging and Air Carbon Arc Gouging)Respect the welding dimensions and requirements in accordance with the established specificationsComplete the proper production and quality documentsInspect parts in collaboration with the quality departmentPerform other duties as assigned. VALUED SKILLS: Manual dexterityPrecision and detail oriented Sense of observation Efficiency Team spiritREQUIREMENTS:Must have the ability to wear a tight-fitting respiratorMust have the ability to acquire welding certificationsMust be able to :Climb stairs and ladders; work at heightsLift and carry between 30-50 lbs.Stand and walk for long periods of timeBend, kneel, squat, twist, reachWork above shouldersTolerate exposure to weather, hot/cold environmentsASSETS: Diploma/ training in Welding or relevant training (or equivalence); Relevant experience#marp1
