Sheet metal manufacturing and distributing company is now seeking to hire an experienced NON CDL/Box Truck Driver for their facility in Orlando, FL. the ideal candidate will be responsible of delivering sheet metal ducts and material to their clients while providing excellent customer service.
Schedule: Monday to Friday - 1st Shift (Overtime available)
Responsibilities:
Operating a 26ft Box TruckSafely transporting merchandiseProvide excellent customer serviceHandling and completing manifestOperate safely and follow safety protocolsRequirements:
Must have experience operating a 26ft BOX TRUCKMust have a valid driver’s licenseMust have a CLEAN DRIVING RECORD - No Points during the last 3 yearsMust follow all traffic laws and follow company policiesMust lift 50 pounds or moreMust have reliable transportationMust be able to read, speak and comprehend English Read LessNationwide Sheet Metal Installation company is now seeking to hire Commercial Electrician Installers to join their team in Jacksonville, FL. The ideal candidate will be responsible of assisting with the installation of conduits, wire, cable, equipment, components, and devices associated with energy management systems including electric/electronic controls, devices, panels, sensors, and components.
Schedule: Monday to Friday (Occasional Weekends) 7am to finish
Responsibilities:
Inspect, troubleshoot, and diagnose electrical systemsRun and install electrical conduitsEducate customers on their electrical systems, functions, and needs.Maintain a fully stock truck inventory for each jobDocument work performed by following company procedureMaintain professional conduct and appearance in all working conditionsSet up electrical service or installation calls when neededRequirements:
2-3 years of commercial electrical installation experienceExperience in conduit installation, panel installation, troubleshooting, outdoor electrical serviceBending pipe, running wires and, pulling wiresInstallation of sensorsHigh voltage wiringMust be comfortable riding own vehiclePower tools exp Read LessWe are seeking a dedicated Wood Framing Assembler to join our dynamic manufacturing team. In this role, you will be responsible for assembling and fabricating wood framing components, ensuring quality, accuracy, and efficiency in every task.
The ideal candidate will possess mechanical aptitude, proficiency with hand and power tools, and experience working in wood framing, carpentry, or manufacturing environments.
Monday to Friday | 1st Shift
40+ OT available
Responsibilities:
Use hand tools, power tools, and fabrication equipment to assemble parts according to specifications.Conduct quality checks throughout the assembly process to ensure adherence to safety standards and project requirements.Assist with machining, carpentry, or fabrication tasks as needed to support project completion.Maintain a clean and organized work environment to promote safety and efficiency.Collaborate with team members to meet project deadlines while ensuring high-quality workmanship.Qualification:
Prior experience in manufacturing or constructionWood truss and wood framing experience requiredExperience reading framing layouts, handling lumber and building materials, and operating production equipment is highly valuedProficiency with forklift operation and basic mechanical knowledge is essential.Familiarity with hand tools, power tools, and materials handling techniques.Knowledge of millwork, carpentry, fabrication processes, and machining is a plus.Reliable attendance and strong work ethicAbility to work effectively both independently and as part of a team in fast-paced settings.If you are motivated by hands-on work that combines technical skills with physical activity, we encourage you to apply today.
Read LessStructural fabrication shop is searching for skilled Stick and Tig Welders with strong experience working independently. Welders will be working with a small crew traveling across Florida working in clients sites. Ideal candidates will be flexible to work morning or night shift when needed, available to work overtime, and can pass a Stick and Tig test.
We have 1 position in shop if traveling is not desired. For traveling welders, having a clear Motor Vehicle Report is ideal. Per-diem will be provided.
Daily duties:
Perform stick and tig welding following blueprints and schematics accurately.Operate power tools, hand tools, plasma cutters, press brake machines, and machining equipment to shape and prepare materials for welding.Read and interpret technical drawings, schematics, and blueprints to determine weld locations, specifications, and procedures.Perform fabrication tasks including cutting, bending (using press brakes), assembly, and rigging for construction or manufacturing projects.Use calipers, micrometers, and other measuring tools to ensure precision in dimensions and fit-up of welded parts.Maintain safety standards by adhering to OSHA regulations and company policies during all operations.Support quality control by inspecting welds visually and with non-destructive testing methods to meet ASME codes & standards.Collaborate with team members to meet project deadlines while ensuring high-quality workmanship.Requirements:
2 years of Stick welding, TIG weldingStrong knowledge of blueprint reading, schematics interpretation, and fabrication processes.Able to bend, squat, and stand for long periods of hours.Able to lift up to 65 pounds comfortably.Experience with rigging techniques for lifting heavy components safely.Monday to Friday (Occasional Weekends)
6am to 3:30pm (For field staff it is required to be available to work overtime)
Starting at $21.00 - $23.00 hourly
Open positions:
In shop - 1On the field - 2If you meet the requirements, we invite you to apply with your updated resume. Our team will be calling qualified candidates within 48 hours.
Read LessMetal processing company that specializes in Aerospace and Military industry is now hiring an experienced Sandblaster for their facility in Orlando FL, the ideal candidate will be responsible for sandblasting different type of metals.
Schedule: Monday to Friday 10:00 am to 6:30 pm (occasional Saturdays).
Duties:
Clean surfaces and tape off areas that shouldn't be blastedBead blasting, sandblasting, metal finishing and, surface preparationUse sandblasting and metal shot blasting machinery and equipmentMaintaining tools and equipmentAny other duties as appointedRequirements:
Must have previous on the job experience in a similar roleMust be able to comply with all safety regulationsMust have experience with bead blasting, sandblasting, metal finishing and surface preparationMust have sandblasting metal shot blasting experienceMust be able to pass a drug and background screening Read LessWe are seeking a detail-oriented Electrical Assembler to assemble low-power electronic components accurately and efficiently while maintaining the highest quality standards and meeting production demands. This is working within a clean, climate-controlled environment, sitting, and standing throughout your shift.
Schedule: Monday - Friday 7:00am - 4:00pm (weekly pay)
Starting pay range: $19.00 - $22.00 per hour.
Job Duties include, but not limited to:
- Read and follow work order instructions to select correct components for each order.
- Read and follow wiring diagrams to properly solder orders.
- Read and follow assembly instructions and schematics to correctly assemble electronics components for each order.
- Properly silicone, screw, and solder components to avoid burning, cracking or damaging components.
- Test all assembly to ensure it works properly before sending to the next department.
- Program drivers per instructions to ensure they have the correct power output for each order.
- Report components not performing as they should to purchasing and technical lab.
- Observe and follow safety guidelines specific to your work area.
- Maintain workspace and assigned tools clean and orderly - daily and weekly.
Required experience & qualifications:
- Experience soldering low-power components.
- Experience assembling low voltage electronic components.
- Experience using basic hand and power tools.
- Can use a multi-meter and properly test low-voltage components.
- Able to read and follow work orders, wiring diagrams, and basic technical drawings.
- Good communication and positive attitude.
Physical Demands:
- Ability to select, lift, carry, and stack product weighing between 15 and 35 pounds.
- Able to sit at a workstation for 8 hours, with breaks while occasionally bending, stooping, and twisting and do repetitive work 2 to 4 hours at a time.
- This position requires manual dexterity and constant use of hands to assemble using manual and power tools.
- Excellent hand/eye coordination to solder and assemble small components
Drug Free Workplace: Employment status will be dependent on ability to pass pre-employment lab screening and may partake on a quarterly random screen.
Read LessA local Florida manufacturing company is seeking dependable and experienced welders specifically MIG and TIG welders to join our production team. This position involves assembling metal components used in industrial platforms, maintenance stands, and custom structural products. Candidates should have manufacturing or assembly experience, strong attention to detail, and the ability to work in a fast-paced environment. Applicants should also be comfortable using hand and power tools and reading basic blueprints or assembly drawings.
Schedule: Monday – Friday
Pay Rate: $25.00-$28.00/hour
1st Shift: 5:00 AM – 1:30 PM
2nd Shift: 3:00 PM – 11:30 PM
Responsibilities:
Assemble metal platforms, stands, frames, and structural componentsRead and interpret blueprints, work orders, and assembly drawingsUse hand tools, power tools, drills, grinders, and measuring toolsAssist with fitting, aligning, and securing metal partsPerform quality checks to ensure products meet specificationsMaintain a clean and safe work environmentWork closely with assembler team membersMIG and TIG Welding
Qualifications:
Must have fabrication experience.Must have shop experience with MIG & TIG WeldingPrevious manufacturing or assembly experience preferredExperience using hand and power toolsBasic blueprint reading skills preferredAbility to read a tape measure accuratelyAbility to lift up to 50 lbs.Work in harsh conditions, heat, weather, noise and confined spaces.Strong work ethic and dependable attendance
Apply Today!
Join a growing manufacturing team producing industrial platforms, stands, and custom fabricated products.
A local cold chain storage manufacturing company in Ormond Beach is seeking a dependable OVERNIGHT Forklift Driver to join our warehouse and production team. This role involves safely operating forklifts to move, load, and organize materials in a temperature-controlled environment. The ideal candidate is safety-focused, efficient, and able to work comfortably in cold storage areas.
Pay: $20.00 per hour
OVERNIGHT SHIFT | 10:00PM – 6:30AM Sun- Thurs
Key Responsibilities:
Operate REACH AND DOBLE JACK forklifts safely to move materials, pallets, and finished goods within cold storage and production areasLoad and unload trucks accurately and efficientlyTransport products to designated locations on the warehouse and production floorsConduct daily forklift inspections and report maintenance issues promptlyMaintain organized inventory and assist with stock controlRequirements:
MUST HAVE prior experience operating REACH TRUCK OR DOBLE JACK forklifts in a warehouse or manufacturing environmentComfortable working in cold storage and physically active during shiftsStrong attention to detail and commitment to safety and quality standards Read LessLocal metal tube distribution company is now seeking to hire an experienced and professional CDL B Driver for their location in Orlando, FL. The ideal driver will be responsible of operating a Flat Bed or Box Truck and providing excellent customer service and safely driving from Orlando to Tampa (loading and unloading).
Schedule: Monday to Friday (6:30am to Finish)
Responsibilities:
Will do a daily trip check inspection of the vehicleWill load, unload and carry productWill complete a daily manifestWill have to lift 65 to 75 poundsMust be a professional representation of the companyRequirements
Valid commercial driver's license (CDL) with a clean driving record - 0 points (no speeding, reckless driving)Proven experience with Flat bed and 26' box trucksProven experience in truck driving with familiarity in operating different trucksAbility to load and unload freight safely and efficientlyStrong understanding of commercial driving regulations and safety practicesExcellent communication skills for effective interaction with team members and clientsNo SAP violations - No past violationsAbility to perform basic vehicle maintenance checksAbility to lift heavy weightMust be able to pass a background check and drug screening as required by company policy Read LessPay: $17.00 - $22.00 per hour
Job description:
We are seeking a dedicated Wood Framing Assembler to join our dynamic manufacturing team. In this role, you will be responsible for assembling and fabricating wood framing components, ensuring quality, accuracy, and efficiency in every task.
The ideal candidate will possess mechanical aptitude, proficiency with hand and power tools, and experience working in wood framing, carpentry, or manufacturing environments.
Monday to Friday | 1st Shift
40+ OT available
Responsibilities:
Use hand tools, power tools, and fabrication equipment to assemble parts according to specifications.Conduct quality checks throughout the assembly process to ensure adherence to safety standards and project requirements.Assist with machining, carpentry, or fabrication tasks as needed to support project completion.Maintain a clean and organized work environment to promote safety and efficiency.Collaborate with team members to meet project deadlines while ensuring high-quality workmanship.Qualification:
Prior experience in manufacturing or constructionWood truss and wood framing experience requiredExperience reading framing layouts, handling lumber and building materials, and operating production equipment is highly valuedProficiency with forklift operation and basic mechanical knowledge is essential.Familiarity with hand tools, power tools, and materials handling techniques.Knowledge of millwork, carpentry, fabrication processes, and machining is a plus.Reliable attendance and strong work ethicAbility to work effectively both independently and as part of a team in fast-paced settings.If you are motivated by hands-on work that combines technical skills with physical activity, we encourage you to apply today. Join our team as a Wood Framing Assembler and play a vital role in bringing complex projects to life through precise assembly and fabrication.
A background check and drug screen are required for an offer of employment.
Read Less