Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
Join a high-performing fabrication team supporting aerospace structural production in Auburn, WA or Everett, WA. As a contractor Numerical Control Programmer (NCP) on our Machining/Tooling team, you’ll drive the NC programming, setup documentation, and machining strategy for complex multi-axis parts used on commercial airplanes. You will collaborate closely with planning, aerospace engineering, tooling, and shop-floor operators to turn engineered concepts into producible, high-quality parts. This role is ideal for hands-on programmers who enjoy solving machining challenges, optimizing workflows, and seeing their programs executed on the shop floor.
Primary Responsibilities
• Create, verify, and revise Machine Control Data (MCD), tooling geometry, and setup documentation for multi-axis CNC machines (primarily 5-axis).
• Interpret engineering drawings, planning documentation, and manufacturing requirements to develop robust NC programs for aluminum and hard-metal parts.
• Develop multiple setups and operations for complex part geometries, ensuring fixturing, tooling, and machine selection support producibility and tolerances.
• Produce clear setup sheets and operator instructions that enable consistent and safe machine operation.
• Use simulation/verification tools (e.g., Vericut) to validate programs and eliminate collisions or gouges prior to shop-floor execution.
• Troubleshoot and iterate programs based on first-article inspections, in-process feedback, and shop-floor testing.
• Coordinate with planning, manufacturing engineering, tooling design, and machine operators to optimize cycle times, reduce scrap, and address manufacturability concerns.
• For Level 4: Lead the design of custom fixtures and complex tooling arrangements and define machining strategies across multiple operations and machines.
• Maintain program documentation, revisions, and configuration control per company/contract requirements.
• Work under general direction.
Required Skills
• 5+ years of NC programming experience for production machining or equivalent combination of education and experience.
• Demonstrated experience programming 5-axis CNC machines for aerospace parts (aluminum and hard metals).
• Proficiency reading and interpreting engineering drawings, GD&T, and manufacturing documentation.
• Proficient in CATIA V5 NC programming.
• Proficient in NC simulation/verification tools such as Vericut.
• Ability to create clear setup documentation and operator instructions.
• Able to work 2nd shift schedule as specified.
• Experience with CATIA V5 and Vericut and programming 3 & 5 axis machines
• Contractor eligibility to work under the terms of the engagement.
Preferred Qualifications
• Prior experience creating custom fixtures and tooling for multi-setup machining operations.
• Experience defining machining strategy and selecting appropriate machines and processes for part families.
• Familiarity with aerospace manufacturing processes, inspection practices, and first-article requirements.
• Strong problem-solving skills with a track record of reducing cycle times or improving producibility.
• Effective communicator with experience collaborating across planning, engineering, and shop-floor teams.
• Experience with additional CAM systems or post-processors commonly used in aerospace environments.
Top Required Skills
Knowledge of transportation modes:Ocean (LCL, FCL)AirRoadRailSpecial equipment shipmentsHazardous materials shipping compliance:IATAIMDGDOTU.S. export regulations and country-specific import/export requirementsPreparation of international shipping documents:Commercial/customs invoicesPacking listsCertificates of OriginFree Trade Agreement documentationBills of LadingCertificates of AnalysisExport documentation:Export DeclarationsShipper's Letters of Instruction (SLI)Other required export paperworkStrong communication and coordination skillsAbility to prioritize and work with urgencyComfortable presenting to senior leadershipStrong accountability and responsivenessDecision-making skills in uncertain situationsCompany DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos. Read LessTop 3-5 Must Have Skills:
• Bachelor's degree in Electrical Engineering, Computer Engineering, Robotics Engineering or related field, or equivalent work experience
• Minimum of 2 years of experience in software development with a focus on data acquisition and test or process control systems.
• Experience in PLC programming with emphasis on Allen-Bradley and Beckhoff PLCs.
• Strong programming skills in LabVIEW or equivalent; familiarity with additional languages is a plus.
• Experience integrating test instruments into control systems, such as power analyzers, power supplies, pressure scanners, temperature scanners, flow meters, pressure transmitters, and actuators.
Designs, modifies, develops, writes and implements software programming applications. Supports and/or installs software applications/operating systems. Participates in the testing process through test review and analysis, test witnessing and certification of software. Requires a bachelor's degree in a related area and 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a manager.
Responsibilities of the position include, but are not limited to:
• Coordinate daily workload in the Chemistry, Carbon and Metals Lab: receiving incoming work in Linked Information Management System (LIMS), prioritize work to meet schedule demands, and communicate work status/changes with customers and laboratory members.
• Perform titrations for solution analysis of production processing chemistries.
• Perform Salt Fog analysis utilizing standard industry techniques
• Perform Oxygen Nitrogen Hydrogen (ONH), Coined Density and Fusion Boundary analysis of powder materials
• Perform viscosity, refractive index, specific gravity and turbidity analysis of various coatings.
• Prepare samples for Xray Diffraction (XRD) analysis.
• Perform cross sectioning of materials/parts and analyze using metallography techniques.
• Utilize microscope instrumentation and software to capture images and/or obtain measurements.
• Operate various analytical instruments.
• Interface with internal and external customers to define appropriate test methods that effectively meet customer requirements.
• Manage solvents, acids, bases, chemicals and consumables inventories.
• Troubleshoot and maintain laboratory test equipment.
Basic Qualifications:
• HS diploma or equivalent
• Minimum of 3 years’ experience in a laboratory environment.
We Value:
• Demonstration of machining, manufacturing and mechanical aptitude.
• Ability and knowledge to perform advanced laboratory techniques, such as titrations and wet bench chemistry.
• Familiarity and experience with various analytical instruments, such as FTIR, TGA/DSC, ONH, SEM/EDS, XRD, Microscopes and XRF.
• Ability to read and interpret specification and drawing requirements
• Effective documentation and reporting of test results using Microsoft Office applications.
• Able to work independently and resolve difficult problems when they arise.
• Communicate effectively with customers and colleagues to successfully achieve desired results.
• Familiar with laboratory safety practices and experience working with hazardous chemicals, solvents, acids, and bases.
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
We are looking for someone to be part of a global research and development team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We are engineers and technicians, skilled scientists and bold innovators; Join us and put your passion, determination, and skill to work building the future!
The Puget Sound NDE and Measurement Systems is an Engineering Team responsible for supporting design, development, production programs, and In-Service. The team provides certification and qualification services across the value stream for NDE and Measurement. The team works on commercial and defense aircraft like: 737, 747, 757, 767, 777, 787, KC-46, B1B, and P-8. The team also conducts research and development with internal stakeholders and external customers. This team spans the entire product life cycle from research and development to active airframe support.
This team supports diverse non-destructive evaluation and measurement technology applications for commercial and defense products produced or supported by the company. There is an opportunity to experience different business unit needs and support a diverse selection of commercial and defense aircraft in different phases of their production lifecycle. By working on this team an individual is able to impact programs across the enterprise and have an opportunity to grow a broad network across the company.
We are looking for someone who have a strong desire to work with technical and non-technical audiences, and be a self-starter. There must be a desire to do non-destructive evaluation work and have a general base of NDE knowledge and/or experience. In addition, understanding of basic analysis techniques to determine performance or reasons for failures of tools, materials, parts or processes will be required. Experience in writing non-destructive inspection procedures for commercial and commercial-derivative aircraft is strongly valued.
Position Responsibilities:
• Develops NDE procedures in support of airline customer maintenance inspections
• Designs NDE reference standards in support of inspection procedures
• Develops engineering specifications and other documents to meet customer needs
• Assists in evaluation of emerging technologies for potential application to business needs
• Assists with development and qualification of new tools, equipment, materials, parts and processes to meet requirements
• Performs routine tests and audits to qualify suppliers to applicable requirements
• Assists in implementing corrective and preventive actions
• Uses project management tools to meet cost, technical, and schedule requirements
• Incorporates environmental health and safety, LEAN and Quality principles into (1) materials and processes, (2) research, design and qualification, (3) work procedures and (4) labs and office areas
Required Skills:
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
• 1+ years of engineering experience
Preferred Skills:
• Experience with CAD systems such as CATIA, Solidworks
• Experience with NDI systems: ultrasonics, eddy current
• Experience in aviation and/or aerospace
• Experience working in multidisciplinary teams
• Excellent communication skills
• Excellent skills with various computing systems
• Excellent documentation and technical writing skills
• Excellent time management skills to manage several simultaneous projects effectively and across various geographical locations
• Knowledge of materials science with metals and/or composites
Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos. Read Less
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
We are seeking an Engineering Associate to support manufacturing engineering and production activities for a leading aerospace organization. This role is ideal for candidates with experience in manufacturing processes, quality, and continuous improvement who enjoy working in a fast-paced production environment.
Responsibilities:
Support manufacturing engineers with daily engineering and production activities.Perform Verification of Build (VOB) activities to ensure products are built according to engineering requirements.Review and interpret engineering drawings and GD&T.Support PFMEA, Process Flow Diagrams, and manufacturing process improvements.Troubleshoot manufacturing issues and perform root cause analysis.Assist with quality documentation, process validation, and continuous improvement initiatives.Work closely with engineering, manufacturing, and quality teams to resolve production issues.Support multiple aerospace product lines, including heat exchangers, coolers, fans, actuators, and vapor cycle machines.Qualifications:
2+ years of experience in manufacturing engineering, process engineering, quality engineering, or a related field.Experience with PFMEA, Process Flow Diagrams, and root cause analysis.Ability to read and interpret engineering drawings and GD&T.Experience conducting manufacturing or quality audits is a plus.Familiarity with SAP or other ERP systems is preferred.Knowledge of Lean Manufacturing and continuous improvement methodologies.Experience with aerospace manufacturing or NADCAP special processes is a plus.Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.Company DescriptionKronos always provides our partners with 100% customer satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos. Read LessKronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customers satisfaction and on time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
KEY RESPONSIBILITIES
. Imagine, design and develop products and systems as part of a highly engaged and integrated
engineering team.
. You will collaborate across engineering teams to create solutions and
systems that meet the evolving needs of our customers.
. You will participate in all phases of product development.
. Refine your engineering talents in a team-based culture by working with innovative products and
technologies.
. Collaborate in world-class project teams to establish effective solutions to complex engineering
problems.
. Improve the world by working on teams that develop modern solutions to complex problems.
. Design engineering using CAD based modeling
. Engineering analysis and weight optimization
. Design for Manufacturing and cost estimation
. Product presentation
. Voice of Customer
YOU MUST HAVE
. Bachelor's Degree in Mechanical or Aerospace Engineering
. 6+ years of mechanical design and engineering experience with NX and Teamcenter
. Experience in engine or APU design
. Proven application of ASME Y14.5 drawing standards including geometric dimensioning and
tolerancing (GD&T), both in generating drawings and checking drawings generated by others
Must be a US citizen
Description:
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customer satisfaction and on-time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
Seeking a Composite and Bonding Processing Engineer to join our team in Ridley Park, PA.
Our team is currently hiring for a broad range of experience levels including experienced or senior level engineers.
This person will work closely with other lab engineers and lab technicians in the execution of lab projects benefitting various aerospace aircraft programs and development. The successful candidate will have familiarity with composite processing, standard mechanical test methods and data analysis, failure analysis, microscopy, and materials characterization (TMA, TGA, DSC, HPLC, FTIR etc.).
This position may require occasional domestic and/or international travel. This position may require you to work overtime depending on the scope of work.
Position Responsibilities:
Establish and manage lab testing processes while ensuring strict adherence to compliance standards and regulatory requirements.
Conduct complex analysis to determine performance or reasons for failures of tools, materials, parts or processes.
Use project management tools to meet cost, technical, and schedule requirements.·
Evaluate emerging technologies for potential application to business needs.
Write material test program plans, lab reports, and associated support paperwork per established guidelines and methods, to characterize the materials' physical, chemical and mechanical properties, processing attributes and safety considerations.
Lead production of specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes.
Lead development and qualification of new tools, equipment, materials, parts and processes to meet requirements.
Define requirements for materials, parts and processes used in the engineering design, manufacture and maintenance of products.
Incorporate environmental health and safety, LEAN and Quality principles into (1) materials and processes, (2) research, design and qualification, (3) work procedures and (4) labs and office
• Required Experience:
o Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
o Experience with composite processing or testing.
o Experience reading requirements documentation and using Microsoft Office products (Word, Excel, etc.)
o Experience collecting organizing, synthesizing, and analyzing data to develop conclusions and recommendations from appropriate data sources.
• Preferred Experience:
o 5+ years of related work experience or an equivalent combination of education and experience
o Experience working in a lab environment
o Failure analysis / destructive testing
o Experience with performance and analysis of mechanical testing
o Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes
Job Description:
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customer satisfaction and on-time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.
The Payloads organization is responsible for everything you see when you fly; and a lot that you don’t: The Interior of the airplane, along with the Cargo compartments, exterior markings, associated systems, and cabin safety all make up Payloads. We are how our airline customers fulfill their mission and represent their brand. Our organization is a fast paced, dynamic environment, which pulls from many engineering backgrounds. The selected candidate will have a statement of work that spans the product lifecycle: supporting customer configuration development, supplier engagement, validating and verifying design requirements, integrating business needs, and supporting the product through the production and certification processes. Your work will include the need to interface with other members of project engineering, production engineering, program/product teams, management, and technical staff to define and implement engineering solutions. You will be able to combine the expertise and resources of the interiors organization to certify and deliver the best interiors products within the industry.
Be part of the team that connects rigorous technical design to the future of air travel.
• BFE Monuments
• Lighting
• Monuments - Lavatories & Galleys
• Certification
• Configuration
• Production Integration - Process/Tools
• Livery
Position Responsibilities:
• Engineering support and project leadership within a production system
• Direct engagement working with/for aerospace suppliers or airlines
• Validating/demonstrating compliance to regulatory requirements
• Working with regulators
• Design for manufacturing
• Aircraft cargo compartment and handling system design, integration, and/or certification
• Works under general direction
• Assignment of final responsibility could be in any one of the following Interiors organizations listed above. Final determination will be based on best fit and alignment of experience.
Basic Qualifications (Required Skills/Experience):
• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• 5+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience.
Preferred Qualifications (Desired Skills/Experience):
• Strong understanding and demonstrated experience with FAA Title 14 Part 25 and/or EASA equivalent.
• Experience in aerospace interiors, materials and properties, design criteria and release processes.
• Experience in program or project management, leading project and/or program proposals of varying complexity (including: development and execution of schedule milestones, financial assessments, resource assessments, risk and/or issues management, etc.).
• Experience leading a cross-functional team.
• Demonstrates good problem solving skills and critical thinking
• Ability to use a variety of media to clearly convey information and ideas to a variety of audiences
• Demonstrated interest in continuous personal learning and development
Description:
Kronos has a long history of avionics engineering working with some of the largest aircraft integrators in the world. We always provide our partners with 100% customer satisfaction and on-time delivery. If you are excited about working for a company that takes its job seriously and does not cut corners you will have a home with Kronos.
Pay Rate: $85/hr
We are seeking a Qualification Testing Lead to support our Air Revitalization Systems product line in Glendale, AZ. In this role, you will lead the planning, coordination, and execution of all qualification testing required to validate system performance, demonstrate compliance, and deliver hardware ready for mission use.
This role involves close coordination with mechanical, electrical, chemical, and systems engineering teams, test laboratories, and scientists developing cutting‐edge air revitalization technologies.
Key Responsibilities
• Lead qualification testing activities for the product line, from planning through execution and reporting
• Define qualification test strategies, plans, procedures, and success criteria
• Coordinate all test logistics, including scheduling, hardware readiness, resource planning, and test site preparation
• Identify, develop, and oversee any required Specialized Test Equipment (STE)
• Ensure all qualification testing complies with customer specifications, MIL‐STDs, and applicable industry standards
• Partner with systems, design, and test engineering teams to ensure test coverage and traceability
• Support risk assessments, readiness reviews, anomaly resolution, and corrective action planning
• Manage test documentation, including test plans, procedures, reports, and review packages
• Communicate progress, risks, issues, and results to engineering leadership and customers
• Maintain adherence to Honeywell processes, configuration control, and engineering rigor
