Komar Industries is seeking Entry Level to Senior Field Service Technicians/Installers to install and service Auger compactors, shredders, balers, ram compactors, and industrial equipment. The primary job functions of this position will be to install, diagnose, repair, perform maintenance and ensure units are fully operational and exceed customer expectations.
What We Offer:
On the Job TrainingPay Range: $24.00 - $40.00+ (based on experience and skill set)Higher Pay When Traveling (1.25 x base rate = 25% increase in pay when traveling)Company Paid Travel ExpensesDaily Meal Per DiemNightly Out-of-Town CompensationField Service Technician Requirements
Must Have:
A good attitude and willingness to learn.Must be willing to travel out of town with overnight stays. (Typical travel is leave out Monday and back by Friday if not sooner, depending on the task.)Pass a DOT PhysicalGood driving recordNeat in appearanceMust be willing to work overtime as necessary based on company needs.On-call required once qualified (2 weeks every 5 months/per rotation).Should be able to work independently with little/no supervision.Ability to lift-up to 70 lbs.Preferred skill sets (not required):
Hydraulics repair and knowledge a plusWelding (MIG, Stick) experiencePrior experience with PLCElectrical controls backgroundBenefits Offered:
Komar considers our workforce our most valuable asset. We strive to provide top-notch compensation and benefit programs to allow Komar employees to protect their personal and financial health, prepare for their futures, and create peace of mind:
Medical, Dental and Vision plans (several plans to choose from)401K with company matchGroup Term and Supplemental Life InsuranceShort Term Disability, Long Term Disability, Paid for by the company.PTO10 Paid Holiday (Eligible immediately)Company UniformsCompany DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.We are looking for a CNC Machinist to join our team!
CNC Machinist (1st Shift)
Groveport, OH
7:00 a.m. to 3:30 p.m., Monday through Friday
Essential Duties
Set up and operate CNC mills and/or lathes and perform progressive machining operations on work involving very close tolerances or unusual requirementsPerform complex machining and fitting of various parts, tools and machines in support of production operationsProgram CNC machine with SIEMENS and FANUC Controls using G code and M code for manufacturing of partsFit and assemble equipment where necessaryOperate overhead crane and forkliftAble to work from blueprints, sketches, and written specificationsUse machinists’ hand tools and measuring instruments with skillBe familiar with the working properties of all machined materialsSpecial Skills
2 -3 years of experience operating CNC machinesMaster Cam Programming a plusExperience in a job shop/ tool room atmosphere preferredDemonstrated competency in computer operationStrong mathematical and mechanical aptitudeAbility to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manuals.Benefits
Medical, Dental, and Vision InsuranceCompany-paid life insuranceShort- and Long-term Disability Coverage401(k) with Company MatchTwo Weeks PTOTen Paid HolidaysPre-employment background check and rug screen required.
$2,000 Sign-on Bonus paid out through the first 12 months of employment.
Company DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.We are seeking a General Laborer to be a part of our team!
Are you willing to:
Move and organize equipment parts and inventory with a forkliftShotblast steel partsAssist with shipping and receivingHelp with overall plant maintenance and cleanlinessPrepare products for shipmentBe self-motivated, dependable, and reliableWork for a great companyDo you have:
A High School Diploma1 - 2 years of experience in a manufacturing environmentPast certifications in forklift and aerial liftsExperience in shop maintenanceThe ability to lift 50lbs and handle the physical workloadWe offer you:
Competitive payMedical, dental, vision, and life insurance coverageCompany-paid life and disability insuranceHSA, FSA, and HRA optionsSupplemental insurance opportunitiesPTO401(k) with MatchCompany-supplied uniforms that are cleaned weeklyKomar Industries, Inc. is an Equal Opportunity Employer - Minority/Female/Disability/Veteran
Company DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.Are you mechanically inclined? Are you interested in a maintenance position? We want you to apply!
ESSENTIAL DUTIES:
Assist with facility and equipment maintenance activities.Conduct daily inspections of tools and equipment.Maintain power industrial trucks, lifts, and maintenance equipmentFollow facility and equipment maintenance policies and procedures.Follow facility safety policies and procedures.Confer with management and department personnel to coordinate work activities or identify and review maintenance needs.Perform and assist with skilled repair or maintenance operations on shop equipment, tools, presses, CNC machines, and welding equipment.Maintain inventories of materials, equipment, or products.Maintain repair or maintenance records.Perform and assist with groundskeeping duties, including upkeep of outdoor areas, building exteriors, and parking lots.Maintain and clean manufacturing facilities and equipment.REQUIREMENTS:
· High School Diploma
· Experience in a manufacturing or warehouse environment is preferred but not required
· Stable work history.
· MUST be able to lift up to 35 pounds regularly, stand for the entire shift, bend, squat, twist and turn
· Ability to work in a team environment and have a desire to assist in various duties and departments as needed
Company DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.Komar Industries, is a world leader in the waste equipment industry. The company manufactures and services balers, compactors, and provides parts and resources to customers.
Komar Industries is looking for a Senior Staff Accountant to join our Accounting Team in Groveport, Ohio. The Assistant Controller is responsible for analyzing financial information and performing a variety of accounting duties associated with the timely and accurate preparation and reporting of financial data, in accordance with applicable accounting, industry, regulatory and institutional principles and policies. The Assistant Controller should possess solid communication, technology, organizational and analytical skills.
Responsibilities:
· Reconcile general ledger accounts as assigned in accordance with departmental deadlines.
· Enter transactions into the general and operating ledger accurately and timely.
· Analyze and audit transactions and general ledger statements for accuracy.
· Prepare bank reconciliations.
· Respond to departmental inquires connected with budgets and expenditures.
· Identify accounting corrections.
· Run daily reports and identify any discrepancies and take action to rectify them.
· Assist in preparing year-end and interim reports.
· Assist with capitalizing fixed assets, write-offs and other updates as requested.
· Provide assistance to internal and external auditors during fiscal year-end procedures.
· Assist with Accounts Receivable and Accounts Payable, as needed.
Maintain a variety of supporting excel schedules.Other miscellaneous duties needed to support team.Qualifications:
3-5 years accounting experience in a manufacturing environment.BA in Accounting or Finance or equivalent experience.Solid understanding of debits and creditsExperience using NetSuite, preferred or other ERP system.Experience with creating journal entriesExperience and understanding of general ledgers.Proficiency in Microsoft Excel and Access. (Advanced skills in Excel preferred).Understanding of processes and data behind the numbers.
Benefits and Compensation:
Medical, Vision and Prescription Insurance).Dental Insurance401(K) Plan with Company MatchGenerous PTO/Vacation PayTen company paid Holidays (eligible at time of hire).Company paid Group Life insurance.Company paid Short-term DisabilityCompany paid Long-term DisabilityCompany DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.LOOKING FOR FIRST SHIFT (7:00 A.M. - 3:30 P.M.) WELDER & FABRICATOR
Come join our team!
Essential Duties:
Position, align, fit, grind, and weld metal parts for heavy equipment manufacturingMove parts into position manually or with an overhead craneAble to follow blueprints and layout specificationsShort arc and spray arc welding abilitiesSpecial Skills/Knowledge/Abilities:
Ability to pass an AWS D1.1 Certification is a contingency of employment.3 to 5 years of experience as welder/fabricator, preferredMust pass a weld testForklift and overhead crane experienceGood mathematical and mechanical aptitudeAbility to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints and procedure manualsKomar Industries provides competitive pay and a comprehensive benefits package, including medical/dental benefits, 401K, PTO, and uniforms
Komar Industries, Inc. is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran
$2,000 sign-on bonus paid out through first 12 months of employment.
Company DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.We are currently seeking a Design Engineer - Project Engineer *On-site Only*
Why Work Here?
“We build careers. We focus on the team. We want you to grow with us.”
As our Design Engineer - Project Engineer you will:
Generate detailed drawings for shop production (Assembly drawings, machining drawings, and weldment assemblies).Research, plan, and design mechanical, electromechanical, and hydraulic products and systems.Apply design and drafting standards.Apply machine design and engineering practices to incorporate various types of drives both electric and hydraulic.Utilize clear, concise, and grammatically correct verbal and written communication skills.Special Skills/Knowledge/Abilities:
B.S. in Mechanical Engineering required.3 - 7 years of experience required.Proficiency in SolidWorks.Machine design experience.Understanding of weldment drawings and machining tolerances.Good understanding of engineering design concepts and material properties.Experience with ERP systems, NetSuite preferred.Hydraulic power unit design experience preferred.Demonstrated competency in Microsoft Office 365, including working knowledge of Microsoft Word, Excel, PowerPoint, and SharePoint.Ability to receive and retain instructions.Demonstrated ability to manage various tasks simultaneously, organize, prioritize, make decisions, and work efficiently and effectively under deadlines.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret a variety of technical instructions in mathematical or diagram form and deal with abstract and concrete variables.Work Environment: Inside office environment. Average office noise levels. No personal protective equipment is required except for occasional visits to the shop.
Physical Requirements: Low physical effort required to sit, stand at files, bend, stoop, lift, and walk; Typing and reading computer and data entry.
Komar Industries provides competitive pay and a comprehensive benefits package, including medical/dental benefits, 401K with company match, and generous PTO.
Komar is an Equal Opportunity Employer-M/F/Disabled/Vets
THE ABOVE STATEMENTS ARE INTENDED TO DESCRIBE THE GENERAL NATURE AND LEVEL OF WORK BEING PERFORMED BY PEOPLE ASSIGNED TO THIS JOB. THEY ARE NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES, AND SKILLS REQUIRED OF PERSONNEL SO CLASSIFIED.
Company DescriptionWe build careers. It does not matter where you look at Komar (purchasing, accounting, manufacturing, engineering); you will find employees who have invested over twenty years with our company. We know how unusual that is in today’s job landscape. When you create an environment that challenges people to rise to their potential and celebrates them for their contributions, longevity is a natural result.