Position Summary:
The purpose of this position is to provide instrumentation and controls (I&C) engineering support for the planning, design, and execution of complex engineering projects. This role is responsible for developing and implementing reliable control system solutions while ensuring compliance with applicable codes, standards, customer requirements, and project objectives. This position is full time, on-site in Houston, TX or Greenville, SC.
Duties and Responsibilities:
Plan, organize, and coordinate I&C engineering and multi-disciplined team/design projects while engaged in the planning, design and construction phases of engineering projects Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, PLC, DCS, network configuration, logic development, network switches, process controls, P&ID development support and review, HMI, communication protocols, routing and layout, SIL, and procurement activities Properly interpret and apply National, State, and Local codes and standards, and customer design requirements for the preparation of electrical design/construction documents, specifications, and system descriptions related to assigned tasks Prepare engineering cost and schedules estimates Generate and review the accuracy of design/evaluation calculations, and specificationsRequired Qualifications:
U.S. Citizenship required Bachelor of Science in Electrical (Power) Engineering or similar accredited engineering B.S. with a minimum of 5 years’ experience (nuclear preferred) in design, estimating, specification preparation, construction document preparation, and related phases of engineering Must have a working knowledge of Federal (including Department of Energy Orders), State, and Local codes and standards applicable to electrical engineering design Familiarity with computer aided drafting applications Read LessPosition Summary:
The purpose of this position is to provide essential technical knowledge and perform design work as described below. This position serves as a staff designer performing assignments of intermediate complexity. This position is full time, on-site in Greenville, SC.
Duties and Responsibilities:
Under direct supervision of the Discipline Lead Engineer or Design Supervisor, prepare and check designs of intermediate complexity utilizing 3D modeling and 2D computer-aided drafting and design (CADD) automation tools Coordinate technical issues with other disciplines, project management, vendors and clients Execute work in compliance with Project Quality Plan and procedures Execute work in accordance with the approved project scope, cost and schedule baselines Perform bulk material take-off analysis and tabulations Provide technical support to activities associated with equipment and material procurement and subcontracting including review of vendor submittals Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes Other duties as assignedBasic Job Requirements:
U.S. Citizenship required Associate degree in related technical field of study and minimum ten (10) years of work-related experience Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors Job related technical knowledge necessary to complete the job Knowledge of discipline codes and standards Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines Ability to attend to detail and work in a time-conscious and time-effective mannerIntermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs Experience providing engineering, procurement and construction (EPC) services on industrial projects Proficiency executing engineering projects utilizing 3D modeling and 2D CADD automation tools in a multi-discipline environmentDiscipline Specific Job Requirements:
Background and experience must include drafting/ designer experience in engineering fields, such as electrical, instrumentation and control or communications Proficiency in computer aided design (Bentley MicroStation) with demonstrated experience to originate and produce drawings with minimum supervision required Proficiency in 3D modeling using Intergraph Smart3D (S3D) and RevitAbility to walk down field systems with minimal guidance, interpret field direction, generate minor design details, create new drawings, modify existing drawings, and direct junior drafters Perform advanced design calculations (lighting, raceway sizing and wire sizing) Perform intermediate design calculations (voltage drop, cable pulling, panel board and breaker sizing, and junction box sizing Perform electrical material take-off Perform field assistancePreferred Qualifications:
Knowledge of commercial availability and cost of materials Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 Practical field experience EPC project experience for the following industries:- U.S Department of Energy or other U.S. Federal Government Agency
- Nuclear facilities under a nuclear quality assurance program
- Manufacturing, pharmaceutical or biotechnology
Advanced knowledge of:- 2D Computer Aided Design (CAD) and 3D CAD systems and procedures
- Intergraph SmartPlant Electrical software
- Intergraph SmartPlant Review software
- Electrical design requirements (grounding/earthing, lighting, wiring, motors, conduit fill and sizing, panel boards and hazardous locations
Read LessPosition Summary:
The purpose of this position is to provide instrumentation and controls (I&C) engineering support for the planning, design, and execution of complex engineering projects. This role is responsible for developing and implementing reliable control system solutions while ensuring compliance with applicable codes, standards, customer requirements, and project objectives. This position is full time, on-site in Houston, TX or Greenville, SC.
Duties and Responsibilities:
Plan, organize, and coordinate I&C engineering and multi-disciplined team/design projects while engaged in the planning, design and construction phases of engineering projects Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, PLC, DCS, network configuration, logic development, network switches, process controls, P&ID development support and review, HMI, communication protocols, routing and layout, SIL, and procurement activities Properly interpret and apply National, State, and Local codes and standards, and customer design requirements for the preparation of electrical design/construction documents, specifications, and system descriptions related to assigned tasks Prepare engineering cost and schedules estimates Generate and review the accuracy of design/evaluation calculations, and specificationsRequired Qualifications:
U.S. Citizenship required Bachelor of Science in Electrical (Power) Engineering or similar accredited engineering B.S. with a minimum of 5 years’ experience (nuclear preferred) in design, estimating, specification preparation, construction document preparation, and related phases of engineering Must have a working knowledge of Federal (including Department of Energy Orders), State, and Local codes and standards applicable to electrical engineering design Familiarity with computer aided drafting applications Read LessABOUT THE ROLE
We are seeking an HVAC Principal Designer to join our team supporting Fluor on their Savannah River Plutonium Processing Facility (SRPPF) project! This position is full-time and will be based out of Greenville, SC.
Responsibilities
Highly skilled in Computer Aided Design (CAD) with demonstrated experience with computer aidedUse drafting applications to originate and produce drawings and 3D models of moderate to advanced complexity3D modeling experience required (S3D preferred)Read, interpret, and generate design drawings of moderate to advanced complexity with minimal supervision from engineering. Must have the ability to walk down field systems with minimal guidance, interpret field direction, generate advanced design details, create new drawings, modify existing drawings, and direct, check, and approve work done by other designersAbility to develop estimates, schedules, staffing requirements, progress reports, key quantities tracking reports, project scope of services, scope of facilities, etc.Requirements
To be considered, you MUST be a United States (U.S.) citizen due to the federal nature of the work.Must have a working knowledge of federal (including Department of Energy Orders), state, and local codes and standards applicable to specialized (nuclear or other areas) engineering designA combination of education and fifteen (15) years of experience (associate degree preferred) in drafting related to Engineering and Construction (nuclear preferred)Background and experience must include drafting/designer experience in engineering fields, such as electrical, mechanical, structural, communications, architectural, fire protection, or civil. Read LessABOUT THE ROLE
We are seeking a HVAC Design Engineer (Principal) to join our team supporting Fluor on their Savannah River Plutonium Processing Facility (SRPPF) project! This position is full-time and will be based out of Greenville, SC.
The purpose of this position is to provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity.
Responsibilities
Serve as a Supervising Lead providing guidance / supervision to other engineers and designers.Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements.Develop and review specifications and design criteria.Perform and check engineering analyses and calculations; specify materials, equipment, and systems; and solve technical problems of advanced complexity.Coordinate technical issues with other disciplines, project management, vendors, and clients.Execute work in compliance with Project Quality Plan and procedures.Execute work in accordance with the approved project scope, cost, and schedule baselines.Develop and review estimates, schedules and progress reports including effort-hour estimating and staff forecasting.Establish, control, and report on material key quantities; provide analysis and forecasts.Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations, and review of vendor submittals.Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes.Basic Requirements
Bachelor’s Degree in Mechanical Engineering and 15+ years of relevant experience.To be considered, you MUST be a United States (U.S.) citizen due to the federal nature of the work.Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards.Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors.Job related technical knowledge necessary to complete the job.Advanced knowledge of discipline codes and standards.Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines.Ability to attend to detail and work in a time-conscious and time-effective manner.Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs.Significant experience providing Engineering, Procurement, and Construction (EPC) services on large industrial projects.Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D Computer-Aided Drafting and Design (CADD) automation tools in a multi-discipline environment.Discipline Specific Job Requirements
Advanced engineering knowledge in the design of heating, ventilation and air-conditioning (HVAC) systems.Development of HVAC load calculations.Development of HVAC air flow diagrams and instrument diagrams.Development of HVAC system sequence of operation narratives.Sizing and specification of air handling units and other equipment.HVAC main duct and distribution duct sizing and routing.Development of black utility (chiller, boiler, custom AHU, air compressor and cooling tower) specifications based upon sizing data provided by Process.Development of HVAC specifications.Preferred Qualifications
Professional Engineer license, preferred.Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1.Advanced knowledge of commercial availability and cost of materials.Demonstrated experience managing and leading large projects.Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out.Practical field experience.EPC project experience for the following industries:U.S Department of Energy or other U.S. Federal Government AgencyNuclear facilities under a nuclear quality assurance programManufacturing, pharmaceutical or biotechnology