***MUST HAVE composite part manufacturing functions: lay-up, cutting, bagging, autoclave experience***
High School Diploma or GED required. Entry level position. Strong mechanical aptitude. Enrollment in a Technical Aviation program preferred. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills. Position Purpose: This is an entry-level position in which the individual will be trained in the manufacturing processes of the aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations in a production department. Principle Duties and Responsibilities: Essential Functions: 1. Under specific instruction and guidance, perform fitting of detail parts and basic drilling and riveting operations using basic mechanic hand tools (pneumatic drills, rivet gun, counter sinks, reamers and files, etc.) . 2. Ensure parts and work content meets the instructions of assigned manufacturing employee and/or Quality Control Inspector. . 3. Learn to read work orders, blueprints, and specification sheets to determine sequence of operation and work requirement. . 4. Align and assemblies parts to be riveted using holding fixtures, pins, clamps and fasteners. . 5. Observe and assist to become familiar with parts and assemblies, then works with decreasing supervision as experience is gained. . Perform other duties as assigned. Other Requirements: 1. Must be able to read a scale and perform basic shop math.. 2. Read and comprehend basic documents and instructions.. 3. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.. 4. Must demonstrate good housekeeping and safety practices.. 5. Proficiency in current personal computer based software.. 6. Must be available to work any shift.. 7. Must be able to lift and transport objects up to 40 pounds..
Comments
Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave in a production environment.
Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.READ BEFORE APPLYING *** THERE IS A REQUIRED ASSESSMENT***
High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Knowledge of applicable regulatory requirements and customer specifications. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose: Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Principle Duties and Responsibilities: Essential Functions: 1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. . 2. Maintains required logs and records. . 3. Completes tasks within allotted time frame. . 4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . 5. Checks all work and ensures a defective free assembly prior to final inspection. . 6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . 7. Maintains a neat and orderly work area. . Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . Perform other duties as assigned. Other Requirements: 1. Strong written and verbal skills required.. 2. Computer skills and general software knowledge necessary.. 3. Must be able to read, write, speak, and understand the English language..
Must Haves (Non-Negotiable):
• High School Diploma or GED.
• Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience.
• Knowledge of applicable regulatory requirements and customer specifications.
• Ability to read and interpret basic blueprints and schematic diagrams.
• Must be able to read, write, speak, and understand the English language..
Highly Preferred:
• Experience in aerospace industry
*Candidates will usually become a direct hire between 6-18 months into the contract
Shift: 5am-3:30pm
Education
High School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required.
Position Purpose:
In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.
Principle Duties and Responsibilities:
Essential Functions:
1. Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents.
2. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps.
3. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. .
4. Ensure the proper use and storage of area tools and equipment. .
5. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. .
Additional Functions:
1. Provide technical support to manufacturing personnel
2. Coordinate inspection workload according to priorities, efficiency and cost effectiveness. .
3. Perform area inspections to ensure compliance with applicable standards and specifications. .
4. Participate in continuous improvement activities. . Perform other duties as assigned.
Other Requirements:
1.Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation
2. Competent in the use of basic shop tools and equipment..
Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.High School Diploma or GED required. 1 year computer experience required, graphic design experience preferred. Ability to read and interpret engineering drawings and specifications that are specific to producing placards, ID plates, spray masks and wire stamping. Position Purpose: Under direct supervision, create and produce placards, identification plates, vinyl spray painting masks, and perform wire stamping, may include final placard installation. Tech 1 is entry level with focus on Category 1 equipment below. Principle Duties and Responsibilities: Essential Functions: 1. Required to read and interpret Completions customer specifications and engineering drawings / specifications to determine the proper color, font, dimension, and materials required to create and install aircraft placards or identification plates, and to create spray masking, as well as perform wire stamping 2. Use Adobe Illustrator, pdf files and Gerber Omega software to accurately draw, layout, and produce aircraft placards. Additional software or machine operating systems may become required as equipment needs dictate 3. Use sign cutting equipment to produce masking per Exterior Markings Drawings requirements for exterior paint application on Gulfstream aircraft 4. Produce placards that require foreign languages to meet foreign aircraft registration requirements 5. Maintain proper documentation of all work to include traceability of materials used during manufacturing to ensure compliance with all inspection and FAA requirements 6. Use precision tools to verify fabricated placards and identification plates meet all engineering requirements which may include installation 7. Operating Equipment Categories: Category 1: Programmable Gerber or other foil printer. Category 2: Programmable sign cutting equipment, Programmable engraver. Category 3: Miscellaneous equipment: Wire stamper, Inkjet printer, etc Additional Functions: 1. Performs daily maintenance on equipment used 2. Complies with all standard operating procedures as well as safety and housekeeping policies 3. Adapts to sudden changes in schedule and priorities 4. Contributes to developing and implementing process improvements that improve safety and reduce cost using Lean Six Sigma and other process improvement techniques 5. Monitors and maintains department materials inventory 6. Monitors aircraft schedules to support materials requirement Perform other duties as assigned. Other Requirements: 1. Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications.
Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.Education and Experience Requirements
High School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred.
Position Purpose:
Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Job Description
Principle Duties and Responsibilities:
Essential Functions: * Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
Additional Functions: * 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .
Perform other duties as assigned.
Other Requirements: * Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
Ability to read and interpret basic blueprints and schematic diagrams.Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.Additional Information
Once your resume has been submitted, you will be sent a Talogy Placement Assessment to your email that must be completed within 48 hours. The Assessment is what gets your resume to the managers IF you successfully pass. It is important to set time aside to complete this assessment, as once it has been opened you CANNOT STOP/CLOSE OUT the assessment. (if you do not pass, you must wait 2 months to re-apply/try the assessment again)
Location: Savannah, GA
Department: J0411-FP G500 Install
Shift: First & Second
Company DescriptionIntergen provides highly experienced aerospace engineers and technicians. Our services span a wide range of expertise, from engineering design and analysis, to manufacturing and assembly.
