SEEKING EXPERIENCED PRESS BRAKE OPERATOR - FRIDAY - SUNDAY ONLY - 5 AM - 5PM OR 5PM - 5 AM - WORK 36 HOURS GET PAID FOR 40 HOURS!! RESTRICTIONS DO APPLY!!!
POSITION SUMMARY:
This position performs press brake operations to produce a variety of sheet metal parts and components in accordance with the customer specifications.
QUALIFICATIONS:
• Ability to perform essential duties
• High school education or GED
• Minimum of two years of press brake experience
ESSENTIAL RESPONSIBILITIES/DUTIES:
This is not a comprehensive listing of all functions and duties performed by employees of this class; employees may be assigned duties which are not listed below; reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment contract and is subject to change at any time by the employer.
• Utilizes the Work Center Dispatch Report in due date order to produce production within schedule. Exceptions will be communicated by production control or operations manager.
• Must be able to read and interpret drawings, follow routers and use simple math to perform basic calculations.
• Must be able to operate, install tooling and set-up mechanical and hydraulic press brakes.
• Must be able to perform visual inspection and dimensional inspection using calipers and basic measuring tools.
• Complies with all quality policies, specifications, regulations and instructions.
• Update computer records and paperwork in accordance with production requirements.
• Performs prescribed preventative maintenance on press brake as required.
• Maintain work area in clean, orderly condition and follows prescribed safety procedures.
• Must have a working command of the English language, and be able to communicate orally and in writing.
MARGINAL FUNCTIONS:
While the following tasks are necessary for the work of the department, they are not an essential part of the purpose of this position and may also be performed by other department members.
• Perform all other duties, as assigned.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Key: Rarely – 1 to 3% of day, Occasionally – 4 to 25% of day, Frequently – 26 to 70% of day,
Continuously – 71 to 100% of day
• Sits occasionally up to 2.5 hours a day.
• Stands frequently up to 7 hours a day.
• Walk occasionally up to 2.5 hours a day.
• Bend/stoop occasionally up to 2.5 hours a day.
• Reach above occasionally up to 2.5 hours a day.
• Drive, use of foot controls occasionally up to 2.5 hours a day.
• Pushing/Pulling frequently up to 7 hours a day.
• Fine manipulation rarely.
• Grip frequently up to 7 hours a day for tool use and parts handling.
• Balance continuously up to 10 hours a day - working around machines and equipment.
• Lift/Carry parts ranging from 0 lb. – 10 lbs. continuously up to 10 hours a day.
• Lift/Carry parts ranging from 10 lbs. – 20 lbs. occasionally up to 2.5 hours a day.
• Lift/Carry parts ranging from 20 lbs. – 50 lbs. rarely
• Vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
THIS POSITION IS FRIDAY - SUNDAY ONLY!!! 5 AM - 5PM OR 5PM - 5 AM - DO NOT APPLY IF YOU CANNOT WORK WEEKENDS!!!
QUALIFICATIONS:
• Ability to perform essential duties
• High School graduate or equivalent
• Internal Transfer - minimum of six (6) months’ Turret experience
• External Hire – minimum of 2-3 years CNC laser experience
POSITION SUMMARY:
Responsible for the setup and operation of a CNC laser to cut parts from various sizes of steel sheets; loads steel into machine, cycles machine, detects malfunctions in machine operations, maintains quality and safety standards.
ESSENTIAL RESPONSIBILITIES/DUTIES:
• Must be able to read and interpret drawings, follow routers and use simple math to perform basic calculations.
• Must be able to set-up, align the laser and select proper cutting programs.
• Perform necessary troubleshooting, maintenance and preventative maintenance of the laser per company procedures.
• Comply with all quality policies, specifications, regulations and instructions.
• Must be able to visually and dimensionally inspect produced parts.
• Must be able to change material on worktable.
• Update computer records and paperwork in accordance with production requirements.
• Maintain work area in clean, orderly condition and follow prescribed safety procedures.
• Ability to work with chemicals, solvents, and lubricants.
• Must have a working command of the English language and be able to communicate orally and in writing.
MARGINAL FUNCTIONS:
While the following tasks are necessary for the work of the department, they are not an essential part of the purpose of this position and may also be performed by other department members.
• Perform all other duties, as assigned.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS CONTINUED:
Key: Rarely – 1 to 3% of day, occasionally – 4 to 25% of day, frequently – 26 to 70% of day,
Continuously – 71 to 100% of day (Based on a 10-hour workday.)
• Sits rarely up to .50 hours a day.
• Stands continuously up to 10 hours a day.
• Walk occasionally up to 2.5 hours a day.
• Bend/stoop occasionally up to 2.5 hours a day.
• Reach above occasionally up to 2.5 hours a day.
• Drive, use of foot controls occasionally up to 2.5 hours a day.
• Pushing/Pulling frequently up to 7 hours a day.
• Fine Manipulation occasionally up to 2.5 hours a day.
• Grip frequently up to 7 hours a day for tool use and parts handling.
• Balance continuously up to 10 hours a day - working around machines and equipment.
• Lift/Carry parts ranging from 0 lb. – 10 lbs. continuously up to 10 hours a day.
• Lift/Carry parts ranging from 10 lbs. – 20 lbs. occasionally up to 2.5 hours a day.
• Lift/Carry parts ranging from 20 lbs. – 50 lbs. occasionally up to 2.5 hours a day.
• Vision abilities required include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
Read Less
THIS POSITION IS FRIDAY - SUNDAY ONLY - WORK 36 AND GET PAID 40 HOURS - RESTRICTIONS DO APPLY
POSITION SUMMARY:
Operates an Amada turret to punch parts from various sizes of sheet metal. Installs tooling in the punch head, inserts steel into the turret, cycles machine, removes processed sheet from the turret, separates scrap from good parts, deburrs parts using grinder or file, and detects malfunctions in machine operations such as worn or damaged cutting tools.
QUALIFICATIONS:
• Ability to perform essential duties
• Minimum 10th grade
• Minimum 1 year machine operating experience
• Prior mechanic experience helpful
ESSENTIAL RESPONSIBILITIES/DUTIES:
• Must be able to read and interpret drawings, follow routers and use simple math to perform basic calculations.
• Install tooling in the punch head as specified by work order, set-up and operate computer numerical control to punch parts.
• Must be able to insert a sheet of steel into the turret from a worktable that is waist/chest high. The weight of the sheet varies from 60 pounds up to 163 pounds. An operator may handle 25 up to 50 sheets per day.
• Must be able to remove the processed sheet from the turret by pulling it onto a second worktable.
• Must be able to break the attached tabs using a file, lift the edge of the processed sheet and shake to separate parts from the scrap metal.
• Performs inspection of parts, de-burrs and removes tabs.
• Must be able to change material on worktable as needed. The worktable is on wheels and requires the operator to roll the table out a few feet to be loaded by forklift. Empty table will weigh approximately 300 pounds.
• Complies with all quality policies, specifications, regulations and instructions.
• Update computer records and paperwork in accordance with production requirements.
• Performs preventative maintenance, lubricates and clean machines.
• Maintain work area in clean, orderly condition and follows prescribed safety procedures.
• Must have a working command of the English language, and be able to communicate orally and in writing.
PLEASE DO NOT APPLY IF YOU HAVE NOT WORKED IN A MANUFACTURING ENVIRONMENT AS A PRODUCTION CONTROL CLERK/SCHEDULER!!!!!!
The Production Control Clerk plays a vital role in managing and coordinating production schedules within a large team of eight or more members. This position involves direct communication with the production team and CSR's
MUST HAVE WORKED IN A MANUFACTURING ENVIRONMENT FOR A MINIMUM OF 3 YEARS
Salary will be commensurate with experience.
Preferred Qualifications
3+ years experience in production control IN A MANUFACTURING ENVIRONMENTAssociate degree in Business Administration or related fieldProficient in data entry and production schedulingAdvanced skills in Microsoft ExcelStrong communication and time management abilitiesExceptional attention to detailDemonstrated teamwork skillsResponsibilities
Schedule production activities to meet operational deadlinesEnter and update production data accurately and timelyTrack orders and maintain order recordsGenerate and analyze production reportsCommunicate effectively with team members and other departmentsMaintain thorough documentation related to productionCoordinate tasks between shop supervisors/lead people, warehouse staff, and managementMust be computer literate with excel and other Microsoft platformsRead Less
Position Summary:
Supports production by accurately and efficiently completing quality related tasks.
Qualifications:
MUST BE ABLE TO WORK 2ND SHIFT 3:30pm - 2:00 am
Minimum 2 years of experience in Quality Inspection of sheet metal parts and weld inspections
High School Diploma/GED
ESSENTIAL RESPONSIBILITIES/DUTIES:
·MUST HAVE SHEET METAL EXPERIENCE - MANUFACTURED ON A CNC PRESS MACHINE
Must have welding knowledge and be able to inspect welds
· Must exhibit a cooperative and flexible attitude.
· Ability and willingness to work within deadlines consistently and with minimal supervision.
· Ability and willingness to apply judgment and discretion where appropriate.
· Must be able to act as a sounding board for Engineers and others prior to decisions. Suggest methods and layouts that result in improved production and workflow.
· Performs work with a constant awareness of improving processes necessary for growth.
· Communicates clearly and effectively both verbal and written.
· Performs first article inspections on sheet-metal parts and assemblies according to written procedures, plans and documents.
· Interprets engineering drawings and prints with multiple views to verify part/assembly compliance.
· Uses basic measurement tools to complete inspections (i.e. calipers, tapes, micrometers, pin/plug gages, blocks, indicators, surface plate, etc...)
· Performs receiving inspections on raw materials as required by established procedures.
· Maintains records of inspections and analysis completed using quality forms and documents.
· Verifies in-process audits are being performed and documented.
· Conducts Gage Repeatability & Reproducibility (GR&R) and correlations studies as required.
· Performs statistical analysis of data as required.
· Assists with calibration program by ensuring that all inspection gages are properly maintained, calibrated and in good working order.
· Assists in processing, developing and implementing corrective actions for the root cause of internal and external process failure modes.
· Performs key functions in daily, weekly and monthly non-conforming material process, including disposition and data collection.
· Assists with the internal quality system audit process and performs other duties as assigned.
Read Less
POSITION IS IN DECATUR - PLEASE DO NOT APPLY IF YOU CANNOT COMMUTE TO DECATUR
MUST BE ABLE TO WORK 3:30pm - 2:00 am
POSITION SUMMARY:
The Pipe Test Operator is responsible for performing a pressurized gas test to determine if leaks are present in welded joints of pipe.
ESSENTIAL RESPONSIBILITIES/DUTIES:
This is not a comprehensive listing of all functions and duties performed by employees of this class; employees may be assigned duties which are not listed below; reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment contract and is subject to change at any time by the employer.
• System Testing: Conduct pressure test using Nitrogen/Hydrogen to a specified test pressure to detect leaks.
• Equipment Use: Set up and operate test equipment such as gaskets, flanges, gauges, couplings, rubber seal and nuts/bolts.
• Test Execution: Conduct pressure testing in accordance with the latest revision of instructions number INS127, Pressurized Inert Gas – Weld Leak Test.
• Defect Identification: Detect and document weld defects, leaks, or other deficiencies during testing.
• Documentation: Maintain accurate test records, including pressure logs and leak reports.
• Safety Adherence: Strictly follow safety protocols, including wearing proper PPE (safety glasses, gloves and safety shoes).
• Communication: Must have a working command of the English language and be able to communicate orally and in writing.
MARGINAL FUNCTIONS:
While the following tasks are necessary for the work of the department, they are not an essential part of the purpose of this position and may also be performed by other department members.
QUALIFICATIONS:
• Ability to perform essential duties.
• High school diploma or equivalent
• Prior pipe testing experience a plus.
• Proficiency in reading and following directions without deviation.
• Focused and pays attention to detail.
• Must be able to work in the United States without sponsorship.
POSITION SUMMARY:
The Shipping Clerk will be responsible for managing all aspects of the shipping department, ensuring timely and accurate delivery of products to customers. The Shipping Clerk will organize and oversee shipments ensuring that products are properly packaged, labeled and shipped. This role requires strong leadership skills, a keen eye for detail, and the ability to coordinate with other departments to streamline shipping processes
QUALIFICATIONS:
· Ability to perform essential responsibilities and physical demands.
· Associate degree or equivalent experience in manufacturing, operations or related field.
· Minimum of three years of manufacturing shipping/warehouse supervision experience.
· Strong knowledge of shipping operations, scheduling trucks, loading procedures, material handling, completing paperwork and bill of lading.
· Experience with ERP systems
· Microsoft Office experience (Excel, Word, Outlook).
· Strong leadership and team management skills.
· Excellent problem-solving abilities.
· Ability to work in a fast-paced environment.
ESSENTIAL RESPONSIBILITIES/DUTIES
Must be detail oriented, manufacturing shipping is a must - PLEASE DO NOT APPLY if you do not have shipping and warehouse experience in a manufacturing setting. MUST HAVE MINIMUM OF 3 YEARS EXPERIENCE.
· Utilize the Shipping Schedules and Production Schedules in due date order to coordinate on-time delivery of products. Exceptions will be communicated by production control or operations manager.
· Direct all activities associated with outbound shipments from order fulfillment to final delivery ensuring shipments are accurate, complete, properly packaged, and free from damage.
· Identify opportunities to improve shipping processes, efficiency, and material flow within the shipping area.
· Manage relationships with shipping carriers, negotiate shipping rates, and monitor carrier performance to achieve cost savings and improve delivery service levels.
· Take corrective action as necessary on a timely basis in accordance with company policy.
· Keep Operations Manager advised of work status, workload, problems and progress as related to work assignments.
· Read and interpret drawings, follow routers and use simple math to perform basic calculations.
· Comply with all quality policies, specifications, regulations and instructions.
· Participate in the implementation and roll-out of lean principles using 5S methods and tools.
· Update computer records and paperwork in accordance with production requirements.
· Maintain work area and equipment in clean orderly condition and follow prescribed safety procedures.
· Must have a working command of the English language and be able to communicate orally and in
writing.
· Perform all other duties, as assigned.
Read Less
Minimum of five (5) years of CNC press brake setup experience is desired.
This is not an entry-level role. We are seeking a highly skilled operator who can independently program, set up, and run CNC press brakes with minimal supervision.
Position Overview
The successful candidate will be able to:
Read and interpret detailed engineering drawingsCalculate programming inputs for the controllerSelect proper toolingComplete full machine setup independentlyPlan and execute bending sequences efficiently and accuratelyStrong mathematical ability is essential. Candidates must possess excellent math skills, including geometry or higher-level math proficiency.
Essential Duties & Responsibilities
Read and understand detailed drawings and production routersPerform precise mathematical calculations related to bend deductions, angles, and layoutsPlan sequence of operations based on part requirementsSelect and position correct flats, V-blocks, radius, and special-purpose die setsProgram CNC controller to produce accurate bendsPerform visual and dimensional inspections using calipers and tape measures (standard and metric)Maintain quality standards in compliance with company policies and specificationsUpdate computer records and production documentationPerform required preventative maintenance on press brakesMaintain a clean, organized, and safe work areaPerform additional duties as assigned Read LessJob description:
Job Summary
We are seeking a motivated and detail-oriented CNC Lathe Operator to join our dynamic manufacturing team. In this role, you will be responsible for operating CNC (Computer Numerical Control) lathes to produce precise metal components according to detailed specifications. Your expertise in CNC programming, blueprint reading, and mechanical knowledge will ensure high-quality production standards are met efficiently. This position offers an exciting opportunity to work with advanced machining equipment, including MAZAK CNC lathes, and contribute to innovative manufacturing processes. Your proactive approach and commitment to safety will help maintain a productive and positive work environment.
CANDIDATES MUST BE ABLE TO WORK 1ST SHIFT 5 AM - 1:30 PM OR 1:30 PM - 10:00 PM - IF YOU CANNOT WORK THESE SHIFTS OR DRIVE TO DECATUR, PLEASE DO NOT APPLY!!!
RECRUITERS DO NOT CONTACT!!
Responsibilities
The successful candidate will have hands-on experience operating Mazak CNC machines.
Experience with Mazatrol conversational programming
* Experience with multi-axis setups, tight tolerances, tool changes and precise measuring devices
* Must be able to read and interpret blueprints and technical drawings to determine machine specifications
* Must be able to follow routers and use basic math to perform calculations
* Must be able to inspect parts using calipers, ID and OD micrometers, depth gages, indicators and scales
* Must be able to follow written and oral instructions
* Must have a positive attitude and able to adapt to a changing work environment and able to deal with delays and unexpected events
* Committed to the quality and accuracy of work performed
* Supporter of Company policies and procedures
* Excellent attendance and dependability
* Negative drug test
Experience:
MUST HAVE A Minimum of 2 year's experience setting up and operating Mazak CNC machines
MUST HAVE A Minimum of two years' experience programming with Mazatrol
Education:
* High school or equivalent
Benefits:
401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Vision insurance
Work Location: In person
Read LessPOSITION SUMMARY: Performs various types of weld preparation, welding and weld finishing operations to manufacture product to customer drawings and specifications.
This position is in Decatur Alabama; there is no relocation assistance for this position - Please do not apply if you are not willing to drive to Decatur.
Recruiters please do not contact!
Must be able to work 1st or 2nd shift - 7am - 3:30 pm or 1:30pm - 10:00pm
Responsibilities
Welding: Perform high-quality, manual Mig (GMAW) welding on pipe and pipe assemblies.
Blueprint Interpretation: Read and interprets, technical drawings and welding procedures to determine pipe specifications, angles, and welding requirements.
Quality Control: Perform visual inspections of welds for defects (cracks, porosity, lack of fusion) and use tools such as gauges to ensure adherence to quality standards.
Material Preparation: Bevel, clean and fit-up pipes, ensuring accurate alignment and proper root openings before tacking and welding.
Equipment Set up & Maintenance: Must be able to set up and adjust the Mig welding parameters and maintain tools such as grinders, torches and welding guns
Safety Adherence: Strictly follow safety protocols, including wearing proper PPE (welding helmet, safety glasses and gloves), ensuring light curtains/safety gates are functioning, and reporting near-misses.
Welds in flat, horizontal and vertical positions.
• Examines weld for bead size and other specifications.
• Positions and clamps work pieces together or assembles them in jig or fixtures.
• Chips off excess weld, slag and spatter.
• Operates grinders and DA sanders to clean up/smooth welds.
• Must be able to perform visual inspection and dimensional inspection using basic measuring tools.
• Complies with all quality policies, specifications, regulations and instructions.
• Update computer records and paperwork in accordance with production requirements.
• Performs prescribed preventative maintenance on welders as required.
Communication: Must have a working command of the English language and be able to communicate orally and in writing.
Qualifications
3+ years of experience in welding and fittingTechnical certification in welding or metal fabricationProficiency in MIG, TIG, and Arc welding techniquesStrong blueprint interpretation skillsExperience in sheet metal fabricationKnowledge of safety procedures and attention to detailIncomplete resumes will not be considered Read Less