Sterile Processing Technician I
Location: Glendale, AZ
Assignment Length: 13 weeks with possible extension
Hours per Week: 40
Shift Time: 6:30a-3:00p
Shift Details: M-F 0630-1500 CSPD Sterile Processing Tech
Travel Pay Estimate: $1,595.84/week
* Note: Travel per diems will follow GSA guidelines to ensure compliance.
Additional Information:
Assignment details available upon request.
IMPORTANT: This job is for TRAVELERS ONLY and will not accept any Arizona residents.
Please apply today to discuss further!
HFFC 20892
Read LessLocation: NY, 14642
Contract Duration: 13 week contract with option to extend
Pay Rate: $1050-$1100 per week
Schedule: Days and Night shifts available, 5x8s
SPECIFIC RESPONSIBILITIES:
Under limited direct supervision:
20% Assist in the care of patients undergoing anesthesia including: preparation of anesthesia equipment prior to the patient’s arrival, placement of anesthesia monitors, ensuring the cleanliness of anesthesia equipment, ensuring availability of specialized anesthesia equipment and supplies and the set-up of medications and supplies where applicable. Continuously communicate with anesthesiologists, residents, CRNAs and anesthesia technologists to ensure their needs are met throughout the day. Assist clinicians with difficult intubations and the placement of central line catheters.
20% Operate the cell-saver machine, keep track of lab reports, and participate in cardiac, liver transplant, vascular, thoracic, trauma, and other advanced surgical cases. Work directly with service-specific faculty Division Chief of designated specialty. Provide on-call coverage.
20% Provide primary support in ensuring that the anesthesia equipment is in good working order and preventive maintenance is completed. Set up and operate sophisticated equipment and perform advanced troubleshooting. Serve as the key resource person in using and maintaining specialized equipment.
15% Assist the Chief Anesthesia Technologist in the development and implementation of in-service training programs. Assist in training of staff in the roles and responsibilities of an anesthesia technologist.
15% Perform anesthesia equipment set up and troubleshooting such as testing Infusion pumps, nerve stimulators, defibrillators, and transport monitors, calibrating anesthesia machines, and attaching fiberoptic bronchoscopes to the video monitor.
5% Set-up rooms between cases, set-up carts throughout the day and provides full service set up at the end of the day. Work with other hospital units to ensure availability of specialized anesthesia equipment. Perform set-up and support of ectopic procedures for anesthesia care ensuring proper equipment is in place for out-of-OR procedures.
5% Provide back up to shift supervisor in his/her absence due to vacation or illness. Perform other duties as assigned by the Shift Supervisor, Chief Anesthesia Technologist, or Operations Manager.
REQUIRED QUALIFICATIONS:
· BLS
· Two years of experience as an Anesthesia Tech
PREFERRED QUALIFICATIONS:
· A four year college education, including related technical training; or a two year college education which included technical training closely related to this position and two years of experience; or an equivalent combination of education and experience.
· Certification by the registry of the American Society of Anesthesia Technologists or other nationally recognized professional certifying body preferred.
Read LessNights, weekends, holidays, on call/callback per unit needs
40 hours/week
The Department of Sterile and Materials Processing is a state-of-the-art instrument processing and sterilizing facility. The Sterile Processing Department assists in the decontamination, High Level Disinfection (HLD), assembling, sterilization and distribution of clean and sterile surgical instruments, trays and pans. These functions are done by state of the art decontamination, HLD and sterilization capital equipment. Instruments, trays and pans are assembled, processed, and distributed to 35 O.R Suites, AFC units, and clinics. These instruments, trays, and pans are tracked by Getinge’s T-DOC bar code system.
MACHINES AND EQUIPMENT USED:
Sterilizers, heat sealers, ultrasonic washer, aerator, utensil washer, cart wash, steris units, hand and power tools, calibration instruments, repair equipment and parts.
Responsibilities:
Inspects, assembles, packages and sterilizes surgical instrument pans, procedural trays, technical equipment, and surgical case carts: selects method of packaging and sterilization consulting with Processing Manager as needed, examines surgical instrumentation for cleanliness and proper assembly and function; assembles instrument sets ensuring appropriate number and type of instrument per ESI software program protocols; handles instruments appropriately to ensure sterilization; completes count/supply sheets to document contents of tray; follows established procedures to package/wrap trays/instruments to guarantee sterilization.
Operates steam sterilizers in accordance with established procedures; checks time, pressure and temperature gauges frequently to attain and maintain proper levels; loads and unloads sterilizers and places items on shelves for distribution. Performs simple maintenance of sterilizers such as cleaning drain baskets. Assures sterility is achieved by preparing cultures, reviewing test packs processed, interprets the results and completes required documentation.
Checks and adjusts medical equipment according to specific procedures to insure instruments and equipment are operating according to specifications prior to issuing. Sends all equipment not meeting specifications to appropriate area for repair.
Decontaminates surgical instruments and equipment following established procedures; prevents cross-contamination per established procedures. Sets up decontamination equipment for operation, cleans and disinfects equipment and work area upon completion of shift, and handles infectious waste and linen according to established protocol to ensure continuous workflow and compliance with department, legal, and regulatory standards.
Receives and stores supplies from outside vendors and Hospital areas; checks stock as it is received against requisitions; documents stock received and reports discrepancies; assists in maintaining par levels of inventory. Documents and fills orders for surgical supplies for patient care areas; delivers supplies when warranted. Maintains records of equipment inventory use, frequency of servicing and equipment not meeting specifications that are referred for repair.
Responsible for quality assurance on all sterile supplies and instruments. Performs daily quality assurance checks on stock levels, sterility dates, and accuracy of procedure carts. Responsible for critical documentation such as biologicals and sterilizer load sheets.
MUST HAVES:
Certified Sterile Processor (HSPA or CBSPD)
BLS
Minimum of 3 years of experience as SPT
Large hospital experience (500 bed plus)
Must have travel experience (6 months)
2 professional references from last two experience
Preferred:
· Level 1 trauma center experience
· Certified Endoscope Reprocessor (CER Cert)
· Orthopedic tray experience
Read LessDuration: 13.0 weeks
Shift Details: Evening Shift/Tuesday - Friday, 10 hours 1200-2230.
Shift Type: 2nd 8h
Location: Sonora, CA
Unit: Sterile Processing
Specialty: Sterile Processing
Local Pay: $35.35/hr
Estimated Weekly Travel Pay: $1,601/week
* Note: Travel per diems will follow GSA guidelines to ensure compliance.
Please apply today to discuss further!
HFFC 14526.0
Hiring a Certified Sterile Processing Technician to work in Sonora, California
Certified Sterile Processing Technician
Must have at least 1 year experience
Contract: 13 weeks
Start: ASAP
These contracts extended very often
Schedules available:
Variable Shift
Pay Rate:
$1300/week
We can discuss taxable / non taxable breakdown further
MUST HAVES:
Certified Sterile Processor (HSPA or CBSPD)
BLS
Minimum of 3 years of experience as SPT
Large hospital experience (500 bed plus)
Must have travel experience (6 months)
Read LessSterile Processing Technician | Sonora, CA
Play a vital role behind the scenes of exceptional patient care. Adventist Health Sonora is seeking a detail-oriented Sterile Processing Technician to help ensure surgical teams have the safe, sterile instruments they need to deliver outstanding care.
What You’ll Do:
Clean, sterilize, assemble, and distribute surgical instruments and equipment
Prepare surgical trays and maintain accurate instrument counts
Perform sterilization testing and ensure compliance with safety standards
Support operating room efficiency and patient safety throughout the surgical process
What You’ll Bring:
Sterile Processing Technician certification required
Strong attention to detail and knowledge of sterile processing procedures
Ability to work in a fast-paced healthcare environment
Team-oriented mindset and commitment to patient safety
Join a trusted healthcare organization in beautiful Sonora, CA—just a short drive from Yosemite National Park and Lake Tahoe. Apply today and help support life-changing surgical care every day.
Read LessCertified Central Sterile Technician – Permanent
Location: Montrose, CO 81401
Openings: 4 (Central Sterile Tech – Day & Evening Shifts)
Schedule: 12-hour shifts (e.g., 7:00 AM – 7:00 PM or 3:00 PM – 3:00 AM)
Pay Range: $17.27 – $27.85/hr (based on experience)
Experience Required: Minimum 2+ years of Central Sterile experience
Education/Certification: Must complete accredited Central Sterile program and maintain CST certification
Submission Requirements: Resume (with AMS logo), Write-Up, NURSYS
Position Summary & Responsibilities:
Decontaminate, sterilize, and prepare surgical instruments
Maintain inventory and ensure proper equipment functioning
Follow infection control and sterilization standards
Document processes and support OR/clinical teams
Read LessLocation: New York 14642
Pay Rate: $966 – $1,096
Schedule: Nights, 5x8-hour shifts (40 hrs/week)
Additional: Weekends, holidays, on-call, and callback as needed
Decontaminate, assemble, sterilize, and distribute surgical instruments and trays
Operate sterilization equipment (steam sterilizers, washers, HLD systems)
Perform quality assurance checks and maintain accurate documentation
Inspect instruments for cleanliness, function, and proper assembly
Manage inventory, stock supplies, and support OR and clinical units
RequirementsCertified Sterile Processing Technician (HSPA or CBSPD): Required
Minimum 3 years of Sterile Processing experience
BLS (AHA only): Required
Large hospital experience (500+ beds) required
Minimum 6 months travel experience required
Two professional references (from recent assignments) required
Preferred QualificationsLevel 1 Trauma Center experience
Certified Endoscope Reprocessor (CER) certification
Orthopedic tray experience
Read LessCertified Sterile Processing Technician
Duration: 13 weeks
Shift Details: Evening Shift/Tuesday - Friday, 10 hours 1200-2230.
Shift Type: 2nd 8h
Location: Sonora, CA
Unit: Sterile Processing
Specialty: Sterile Processing
Local Pay: $35.35/hr
Estimated Weekly Travel Pay: $1,601/week
* Note: Travel per diems will follow GSA guidelines to ensure compliance.
Please apply today to discuss further!
HFFC 14526
Read LessSterile Processing Tech (SPT)- Oklahoma, 74464
Schedule: Monday to Friday
Pay: $1400-$1475/week
Position Summary & Responsibilities
Perform decontamination, cleaning, assembly, and sterilization of surgical instruments per hospital standards
Prepare and process general, trauma, and robotic surgical instrumentation for operating room use
Ensure accurate tracking, documentation, and compliance with infection control and sterilization protocols
Inspect instruments for damage, functionality, and readiness for surgical procedures
Support OR teams by ensuring timely availability of sterile trays and equipment
Requirements
CER (HSPA), CIS (HSPA), or CSIS (CBSPD). BLS (AHA)
Minimum 1–2 years Sterile Processing experience required
Please Apply Today!
Read Less