Bench Technician – Euless, Tx
Job Description:
Responsibilities include the repair and quality testing of industrial electronic equipment. Experience in repairing one or more of the following: AC/DC Drives, PLC's, Touchscreens, Monitors, Power Supplies, Chart Recorders, Temperature Controllers and Counters as well as other Industrial Electronics. Additionally, the technician will fully function test each unit repaired, run under load when applicable, order necessary components and properly document work orders. Technicians are required to test down to the component level, use soldering and troubleshooting skills and read schematics. Test equipment such as an oscilloscope, multi-meter and function generator are used to insure proper repair of units.
Knowledge & Skills Required:
Computer proficiencyMulti-taskerFast paced EnvironmentAble to work independentlyDetail orientedAbility to solder wellProblem solvingTrouble shootingCommunication SkillsWork Schedule:
Hours are 8am to 5pm with lunch from 12pm-1pm. There are two 15 min breaks at 10am and 3pm.
Benefits:
· Medical Benefits
· Dental insurance
· Vision insurance
· Company match 401(k) plan eligible at 1 year (6%)
· Paid Time Off: 6 days (48 hours) of PTO. An additional 5 days (40 hours) is granted on 1 year anniversary
· 7 paid holidays
Company DescriptionAbout Global Electronic ServicesBench Technician – Euless, TX
Job Description:
Responsibilities include the repair and quality testing of industrial electronic equipment. Experience in repairing one or more of the following: AC/DC Drives, PLC's, Touchscreens, Monitors, Power Supplies, Chart Recorders, Temperature Controllers and Counters as well as other Industrial Electronics. Additionally, the technician will fully function test each unit repaired, run under load when applicable, order necessary components and properly document work orders. Technicians are required to test down to the component level, use soldering and troubleshooting skills and read schematics. Test equipment such as an oscilloscope, multi-meter and function generator are used to insure proper repair of units.
Knowledge & Skills Required:
Computer proficiencyMulti-taskerFast paced EnvironmentAble to work independentlyDetail orientedAbility to solder wellProblem solvingTrouble shootingCommunication SkillsWork Schedule:
Hours are 8am to 5pm with lunch from 12pm-1pm. There are two 15 min breaks at 10am and 3pm.
Benefits:
· Medical Benefits
· Dental insurance
· Vision insurance
· Company match 401(k) plan eligible at 1 year (6%)
· Paid Time Off: 6 days (48 hours) of PTO. An additional 5 days (40 hours) is granted on 1 year anniversary
· 7 paid holidays
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesThis is a shop-based hydraulic repair and rebuild position. This is NOT a maintenance mechanic, facilities maintenance, or equipment PM role. Candidates should have experience diagnosing, rebuilding, and testing hydraulic components—not maintaining production equipment.
Job Description:
We are seeking an experienced Hydraulic Component Repair Technician to diagnose, rebuild, and test hydraulic pumps, cylinders, valves, motors, gearboxes, and related components in a dedicated repair shop environment.
This is a hands-on bench repair role focused exclusively on component teardown, failure analysis, rebuilding, and performance testing. This position does not involve preventive maintenance, facilities maintenance, or servicing production equipment.
Responsibilities:
Responsibilities:
Diagnose root causes of hydraulic component failures through teardown, inspection, and testingRebuild hydraulic pumps, cylinders, valves, motors, gearboxes, and related components to OEM specificationsDisassemble, clean, inspect, measure, and document component wear and failure modesReplace seals, bearings, shafts, and other worn components while maintaining critical tolerancesRead and interpret hydraulic schematics, exploded views, and OEM repair manualsPerform bench testing and quality verification of rebuilt components prior to releaseComplete repair documentation, including findings, parts used, and test resultsManage repair projects independently from initial teardown through final testingMaintain a safe, clean, and organized repair shop environmentRequirements:
Strong mechanical aptitude and troubleshooting abilityExperience repairing and rebuilding hydraulic components from multiple OEM brandsAbility to read hydraulic schematics and technical manualsProficiency with measuring tools and shop equipmentAbility to work independently with minimal supervisionStrong attention to detail and commitment to quality workmanshipQualifications:
5+ years of hydraulic repair experienceExperience with industrial hydraulicsMachining or fabrication experience is a plusBenefits:
· Monthly Employer Contribution to Health Insurance, starts after 60 days on payroll and the following 1st of the month
· Dental Insurance optionally available
· Vision Insurance optionally available
· Life Insurance optionally available
· Paid Holidays after 90 days
· 401(k) Plan 100% match up to 6% employee deferral after 1 year of employment
· Paid Time Off – Includes all PTO - 6 days after 90 days of employment, after 1 year, add 1 week; unused time rolls over within your first year and pays out after your first year.
Company DescriptionAbout Global Electronic ServicesJob Description
Great communication skills and be able to maintain and supervise a fast paced shipping/receiving environment. Responsibilities will include supervising a variety of tasks in a warehouse. Loading and unloading trucks, inventory, pulling orders, shipping product, etc. Receiving duties include manual logging individual items into database including serial numbers, model numbers, etc.
Qualifications:
Warehouse experience , Shipping/Receiving experience, ability to drive a forklift, computer literateFreight forwarding experience.Receiving/Data entry experience. SAPSupervisory experienceKnowledge and Skills:
Creates shipping documentation including bills of lading, shipping labels, and exportpaperwork. (NAFTA Certs, AES filing)
Routes outgoing shipments through various freight forwarders and schedulestransportation of shipments.(UPS Worldship, FedEX GND via the Internet, International Forwarding
Agents)
Maintains shipment files, issues reports, and responds to customer inquiries regarding
status of shipments.
Required experience:
Supervising Daily Warehouse Activities: 5 yearsShipping/Receiving/Warehouse: 7 yearsCompetitive Pay and Excellent Benefits
Company DescriptionAbout Global Electronic ServicesWarehouse Associate
Key Responsibilities
Safely operate forklifts and other warehouse equipment to move, load, and unload materialsPerform general warehouse duties including picking, packing, palletizing, and staging ordersAssist with shipping and receiving activitiesComputer work and reporting (Excel and SAP Business One is a plus)Knowledge of logistic shipping site such as Saia, FedEx and UPS a plusQuality Control of units that are being packed and shippedPalletizing odd shaped units and hand wrap on a palletMaintain a clean, organized, and safe work environmentConduct daily forklift and equipment inspections; report issues to a supervisorFollow all company safety policies and OSHA guidelinesSupport team members with additional warehouse tasks as neededQualifications
Previous warehouse experience requiredValid forklift certification/license preferredAbility to operate sit-down, stand-up, or reach forklifts (based on operational needs)Ability to lift up to 80 lbs and perform physical labor throughout the shiftStrong attention to detail and ability to follow instructionsDependable, punctual, and team-oriented with a strong work ethicWork Environment
Warehouse setting with varying temperaturesFrequent standing, bending, lifting, and walkingPersonal Protective Equipment (PPE) required (Steel Toe Boots/shoes)Company DescriptionAbout Global Electronic Services