Immediate permanent Maintenance Electrician opportunity for a growing manufacturing plant located in Crystal Lake, Illinois. The Industrial Electrician is responsible for supporting both production equipment builds and facility maintenance by performing electrical wiring, troubleshooting, and system improvements to meet production, quality, and customer expectations.
Job Responsibilities
Read and interpret electrical schematics, wiring diagrams, and layout drawings Assist with system checkout, testing, and startup of new equipment Troubleshoot motor control circuits, drives, and PLC systems Troubleshoot and repair electrical systems on production equipment and within the facility Perform routine PM’s, repairs, rebuilds, and modification on production & facility equipment.Assist with electrical retrofits, upgrades, and equipment improvements Diagnose and repair motors, drives, sensors, and control components Work cross-functionally with Production, Engineering, and Maintenance teams Maintain a high level of safety awareness and report any unsafe or hazardous conditions Able to operate various machinery – scissor lift, boom lift, and forklift Assist with other maintenance-related tasks as necessary Be aware of the importance of using correct lifting techniques Assist with wiring OEM vibratory equipment. Support cross training with maintenance and production teams.Requirements:Requirements
Self-starter with flexibility to support both production and maintenance teamsStrong attention to detail Must have a valid Driver’s License High School Diploma or equivalent is required 2-year technical degree in electricity, electronics, or trade school preferred Minimum 3–5 years of industrial electrical experience in a manufacturing environment Experience troubleshooting PLC systems, preferably Allen Bradley Experience working with 480V, 3-phase systems down to 12 DCAbility to read and interpret electrical schematics and prints Willingness to be flexible with working hours, including prescheduled daytime shifts and Saturdays as required Ability to stand for duration of shift Ability to lift up to 50 lbs. or move 100 lbs. with lifting equipment or assistance Able to speak, read, and write the English languagePay: $30.00 to $36.00 hourly. The range provided is a guideline and not a guarantee of compensation. Other factors that are involved in offer decisions include, and are not limited to a candidate’s experience, qualifications, geography, and internal equity.
Benefits: Our benefit programs provide choice and flexibility to meet the needs of you and your family. This includes health and well-being, financial planning tools, career development, PTO, and more.
EOE M/F/D/V
Read LessGK Systems, a General Kinematics’ Brand, is a premier leader in the design and integration of recycling and foundry systems. Whether it’s the complete design and manufacture of a greenfield project, complicated retrofits, or system upgrades, GK Systems is the one stop shop.
We are currently looking for a qualified Design Engineer to join our team. This position is responsible for the development, design, and analysis of complex recycling and foundry systems. The ideal candidate will have direct experience with the design, layout, and ROI analysis of capital equipment projects and will thrive in a collaborative environment working alongside Production Engineering, Customer Service, and Sales. If you are passionate about engineering innovation, customer-driven design, and delivering high-quality industrial systems, we want to hear from you.
Job Responsibilities
· Lead and participate in the development and design of complete system layouts for recycling, foundry, and industrial processing applications, from concept through detailed design.
· Create, review, and modify engineering drawings and 3D models in conformance with GK standards to accurately and clearly define equipment, assemblies, and parts for manufacture, ensuring all deliverables meet quality and schedule requirements.
· Utilize Revit, Autodesk Construction Cloud, Inventor, and AutoCAD to produce complete, accurate drawing packages for internal manufacturing and external customer use, including BOM generation, general arrangement drawings, and installation documentation.
· Continuously develop and apply engineering design, structural analysis, CAD, and manufacturing knowledge, with a focus on deepening expertise in GK equipment and vibratory system technology.
· Support new market development initiatives by contributing technical insight to product positioning, application engineering, and identification of opportunities to expand GK Systems’ capabilities into adjacent industries.
· Partner proactively with Sales and Project Management teams to develop technically sound and commercially competitive proposals, including system sizing, equipment selection, and preliminary design concepts that address customer requirements and budget constraints.
· Integrate safety as a core design principle in all system layouts and equipment designs, adhering to applicable OSHA standards, ANSI/ASME codes, and GK internal safety guidelines to protect personnel and ensure regulatory compliance.
· Drive cost efficiency through design optimization, value engineering, and standardization of components, actively identifying opportunities to reduce material and fabrication costs without compromising quality or performance.
· Leverage available engineering tools, simulation software, and emerging technology to enhance design accuracy, accelerate project timelines, and improve overall team productivity.
· Fully support the Company’s ISO objectives, policies and procedures.
Requirements:· Bachelor’s degree in Mechanical Engineering or related engineering discipline from an accredited institution.
· 2+ years of engineering experience designing capital industrial equipment such as conveyors, vibratory systems, material handling equipment, or process machinery is strongly preferred; recent graduates with relevant internship or co-op experience will be considered.
· Strong analytical and problem-solving skills, with the ability to systematically diagnose engineering challenges, evaluate design alternatives, and implement effective, well-documented solutions under project constraints.
· Demonstrated understanding of basic business concepts, project economics, and the ability to translate customer requirements into viable engineering solutions, communicating technical content clearly to both technical and non-technical audiences.
· Proven ability to take ownership of assignments, manage competing priorities, meet deadlines, and proactively drive tasks to completion with minimal supervision.
· Excellent interpersonal, communication, and organizational skills, with a collaborative mindset and the ability to work effectively across cross-functional teams including Engineering, Sales, Manufacturing, and Customer Service.
· Strong attention to detail with a commitment to producing accurate, complete, and professional engineering documentation and drawings.
· Proficiency in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint); hands-on experience with Autodesk Inventor, AutoCAD, and/or Revit required. Experience with Autodesk Construction Cloud, FEA tools, or other simulation software is a plus.
Pay: $70,000 to $80,000 paid annually. The range provided is a guideline and not a guarantee of compensation. Other factors that are involved in offer decisions include, and are not limited to a candidate’s experience, qualifications, geography, and internal equity.
Benefits: The position also comes with an annual profit-sharing incentive bonus payment. Our benefit programs provide choice and flexibility to meet the needs of you and your family. This includes health and well-being, financial planning tools, career development, PTO, and more.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential
functions of the job.
EOE M/F/D/V
Read LessGeneral Kinematics is the premier manufacturer of vibrating equipment for the processing of bulk
materials. From vibratory feeders to entire process systems, General Kinematics creates the solutions
customers require to process even the most difficult materials.
We are currently looking for a qualified Material Handler to join our team and assemble orders and
prepare of goods for shipment. Communication with customers and functional organizations within the
company is an important part of this position.
Job Responsibilities
Understand and follow procedures that comply with Company policies.Fill orders with the correct parts and quantities.Package product in accordance to customer and GK requirements.Assist in the loading and unloading of trucks.Operate a forklift.Be aware of the importance of using correct lifting techniques.Requirements:High School Diploma or equivalent is required.
Minimum of one (1) year of work-related experience, preferably in manufacturing environment.Ability to lift up to 70 lbs. continuously.Able to speak, read and write the English language.Strong attention to detail.Good work ethic.Employment includes: Benefits include competitive pay, health, dental and life insurance, tuition
reimbursement, 401(K), on the job training, development and much more.
Reasonable accommodations may be made to enable individual with disabilities to perform the essential
functions of the job.
Pay: $19.00- $21.00 hourly. The range provided is a guideline and not a guarantee of compensation. Offer decisions are based on factors including a candidate’s experience, qualifications, geography, and internal equity.
Benefits: Our benefit programs provide choice and flexibility to meet the needs of you and your family. Benefits include health and well-being coverage, financial planning tools, career development opportunities, paid time off (PTO), and more.
EOE M/F/D/V
Read Less