(This position is subject to the Export Control Laws, which requires the employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Essential Job Requirements (MINIMUM):
Internal Auditor – Internal Auditing
· Assists with creation of the Internal Audit schedule with the Senior Quality Manager or Quality Administrator
· Plans and perform internal auditing throughout the organization as required by the schedule.
· Creates Audit Reports and manages associated records.
Customer Support
· Cascade Gasket Customer Survey Management (e.g. Quality System Survey)
· Responds to Customer Document requests (ITAR, AS9100, Customer Approvals. Etc.)
Document Control
· Coordinating Engineering Drawing Release Requirements.
· Managing all incoming customer design data including DPD.
· General administration includes filing, data entry, typing and assisting in the management of communications and paperwork, while maintaining paper or electronic documents and records.
· Coordinate executive communications, including taking calls, responding to emails, and interfacing with customers.
· Ensuring all external customer and internal customer requested documentation is accurate and completed in a timely manner.
Inspection
· May perform dimensional inspection or FAI when needed.
· Responsible for conforming to the company's quality system procedures as documented.
· Keep a safe office space by complying with procedures, rules, and regulations.
· Performs other duties as assigned.
EDUCATION:
High School Diploma or GED preferred.
EXPERIENCE:
10+ years of quality assurance experience in aerospace manufacturing
10+ years of knowledge and administration in the following processes.
· Control of Nonconforming Materials/Corrective Action
And in conformance with the following requirements.
· AS9100.
· Boeing BDS
· Boeing BCA
· Boeing BGS
REQUIRED SKILLS:
Ability to obtain required login credentials for customer portal secure data sites such as Exostar.
Able to read and interpret Engineering requirements.
Analytical and creative skills to find solutions to problems.
Proficient using PC and software applications.
Basic mathematical skills.
Attention to detail.
Sense of Urgency.
Ability to multitask various priorities.
Strong interpersonal and personnel management skills.
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires the employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Summary of Position
Inspect materials and parts though the entire manufacturing process.
Essential Job Requirements (MINIMUM):
Performs the following:
· Inspects products from start to completion to ensure conformation to engineering and specifications. Visually and tactually examines product and material to ensure defects do not occur. Records results as needed to create required results.
· Ability to schedule, document and closes out projects and/or tasks under the supervision of the QA Manager.
· Up-to-date on current and best practices related to quality assurance standards.
· Actively participates in the development of QA practices.
· Able to perform verification of First Article per AS9102 requirements by using the assured methodology per standards.
· Verifies sampling of product to drawing per standards.
· Verifies part labels and marking of products to ensure specification are followed.
· Review all manufacturing work orders (M.O.) to ensure readability, completion of operation, count is accurate and complete to AS9100 requirements.
· Performs computer transactions to complete M.O. and finals operation.
· Responsible for conforming to aerospace requirements by adhering to the company's quality system procedures as documented.
Performs other duties as assigned.
EDUCATION:
High School Diploma or GED required.
Technical coursework related to blueprint reading required.
Application of AS9100 in a manufacturing environment required.
Knowledge of Boeing specification strongly preferred.
EXPERIENCE:
5+ years of manufacturing quality assurance experience in the aerospace industry required.
GD&T understanding and utilization strongly preferred.
LEVEL II INDICATORS
Capable of in-process inspection.
Is proficient with hand measurement tools i.e., Scales, Calipers, Radius Gauges, Pin Gauges to satisfy final product acceptance.
Is willing to learn about the commodity and become proficient in expecting parts of medium complexity off the production floor.
Understand and participate in 6S.
First Article Inspections/FAIRS.
Solid understanding of metrology.
Is proficient with hand measurement tools ie. Micrometers, Height Gauges to satisfy final product acceptance and FAIRS.
Has a basic-functional understanding of GD&T.
Ability to read CMM reports.
Able to write internal NCR’s
Able to validate dimensions
Certified to train on final Inspection within the company.
REQUIRED SKILLS:
Analytical skills and creative thinking
Proficient using Microsoft Office and ERP systems.
Advanced mathematical skills to include use and understanding of metrology. eg: hand tools such as dial calipers, micrometers, height gage.
Attention to detail in respect to inspection and specifications.
Proficient time management skills to insure on time delivery with ability to execute tasks simultaneously.
Strong communication skills
Positive approach to problem solving
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires the employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Summary of Position
Inspect materials and parts though the entire manufacturing process.
Essential Job Requirements (MINIMUM):
Performs the following:
· Inspects products from start to completion to ensure conformation to engineering and specifications. Visually and tactually examines product and material to ensure defects do not occur. Records results as needed to create required results.
· Ability to schedule, document and closes out projects and/or tasks under the supervision of the QA Manager.
· Up-to-date on current and best practices related to quality assurance standards.
· Actively participates in the development of QA practices.
· Able to perform verification of First Article per AS9102 requirements by using the assured methodology per standards.
· Verifies sampling of product to drawing per standards.
· Verifies part labels and marking of products to ensure specification are followed.
· Review all manufacturing work orders (M.O.) to ensure readability, completion of operation, count is accurate and complete to AS9100 requirements.
· Performs computer transactions to complete M.O. and finals operation.
· Responsible for conforming to aerospace requirements by adhering to the company's quality system procedures as documented.
Performs other duties as assigned.
EDUCATION:
High School Diploma or GED required.
Technical coursework related to blueprint reading required.
Application of AS9100 in a manufacturing environment required.
Knowledge of Boeing specification strongly preferred.
EXPERIENCE:
5+ years of manufacturing quality assurance experience in the aerospace industry required.
GD&T understanding and utilization strongly preferred.
LEVEL II INDICATORS
Capable of in-process inspection.
Is proficient with hand measurement tools i.e., Scales, Calipers, Radius Gauges, Pin Gauges to satisfy final product acceptance.
Is willing to learn about the commodity and become proficient in expecting parts of medium complexity off the production floor.
Understand and participate in 6S.
First Article Inspections/FAIRS.
Solid understanding of metrology.
Is proficient with hand measurement tools ie. Micrometers, Height Gauges to satisfy final product acceptance and FAIRS.
Has a basic-functional understanding of GD&T.
Ability to read CMM reports.
Able to write internal NCR’s
Able to validate dimensions
Certified to train on final Inspection within the company.
REQUIRED SKILLS:
Analytical skills and creative thinking
Proficient using Microsoft Office and ERP systems.
Advanced mathematical skills to include use and understanding of metrology. eg: hand tools such as dial calipers, micrometers, height gage.
Attention to detail in respect to inspection and specifications.
Proficient time management skills to insure on time delivery with ability to execute tasks simultaneously.
Strong communication skills
Positive approach to problem solving
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires the employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Essential Job Requirements (MINIMUM):
Internal Auditor – Internal Auditing
· Assists with creation of the Internal Audit schedule with the Senior Quality Manager or Quality Administrator
· Plans and perform internal auditing throughout the organization as required by the schedule.
· Creates Audit Reports and manages associated records.
Customer Support
· Cascade Gasket Customer Survey Management (e.g. Quality System Survey)
· Responds to Customer Document requests (ITAR, AS9100, Customer Approvals. Etc.)
Document Control
· Coordinating Engineering Drawing Release Requirements.
· Managing all incoming customer design data including DPD.
· General administration includes filing, data entry, typing and assisting in the management of communications and paperwork, while maintaining paper or electronic documents and records.
· Coordinate executive communications, including taking calls, responding to emails, and interfacing with customers.
· Ensuring all external customer and internal customer requested documentation is accurate and completed in a timely manner.
Inspection
· May perform dimensional inspection or FAI when needed.
· Responsible for conforming to the company's quality system procedures as documented.
· Keep a safe office space by complying with procedures, rules, and regulations.
· Performs other duties as assigned.
EDUCATION:
High School Diploma or GED preferred.
EXPERIENCE:
10+ years of quality assurance experience in aerospace manufacturing
10+ years of knowledge and administration in the following processes.
· Control of Nonconforming Materials/Corrective Action
And in conformance with the following requirements.
· AS9100.
· Boeing BDS
· Boeing BCA
· Boeing BGS
REQUIRED SKILLS:
Ability to obtain required login credentials for customer portal secure data sites such as Exostar.
Able to read and interpret Engineering requirements.
Analytical and creative skills to find solutions to problems.
Proficient using PC and software applications.
Basic mathematical skills.
Attention to detail.
Sense of Urgency.
Ability to multitask various priorities.
Strong interpersonal and personnel management skills.
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Summary of Position
Responsible for ensuring that quality department personnel and resources support the delivery of products and services that meet customer expectation and company standards. Will be responsible for maintaining and improving quality policies and documentation, oversees the work of the quality processes and personnel. Will develop and maintain a collaborative working relationship with other company leadership and supervision team members.
Essential Job Requirements (MINIMUM):
Supervisory/Leadership:
· Monitoring work progress to ensure that deadlines are met and that quality standards are upheld.
· Responsible for mentoring and training new employees on company rules, policies and procedures, including safety requirements. As well as continued training, mentoring and development of personnel.
Possesses the skills and experience to develop and administer processes that ensure fulfilment of customer’s contract requirements (e.g. specifications, standards, regulatory, etc.).Provide guidance in LEAN principles throughout the QA/QC processes as opportunities present themselves.Provide guidance for prioritizing/managing inspection and processing queues.Provide mentorship and leadership for direct report’s attendance, job performance and adherence to policies.Provide effective and clear communication when corrective action is required to improve a direct report’s performance.Managing projects involving a team of employees working on specific tasks towards common goals.Providing guidance and support to employees in their work teams to ensure that they are performing their jobs effectively.Evaluating potential hazards in the workplace and recommending solutions to unsafe conditions.Monitoring and reporting on employee productivity to ensure that goals are being met.Promote a policy of “What are the facts? What is the right thing to do?”Quality:
· Experienced and deep comprehension of aerospace standards and specifications (e.g. AS9100 QMS, AS9102 FAI, BAC, BDS, etc) as well as how to implement and maintain.
· Knowledge of GD&T ANSI Y14.5
· Leads the personnel and processes for inspection of rubber materials, parts or products for conformance to specifications.
· Ability to read and interpret 2D drawings including mylars, specific to aerospace.
· Understanding best practices and application of the various tools used to inspect/verify products to the referenced design data.
· Basic understanding of CMS (CMM or Laser Scanner) processes.
· Thorough understanding of metrology and calibration processes.
· Up-to-date on current and best practices related of quality assurance and quality control.
· Actively participates in the development of QA/QC practices.
· Responsible for adhering or recommending improvements to the company’s quality system procedures as documented in our QMS.
· Other duties as assigned
EDUCATION:
High School Diploma or GED required. Technical coursework related to blueprint reading, application of AS9100 in a manufacturing environment required.
EXPERIENCE:
5+ years of manufacturing quality assurance experience required, preferably in a build-to-print manufacturing environment. Experience in aerospace manufacturing preferred.
REQUIRED SKILLS:
Analytical and creative skills to find solutions to problems.
Proficient using PC and software applications.
Advanced mathematical skills.
Attention to detail.
Sense of Urgency.
Ability to work on numerous projects at once.
Strong interpersonal and personnel management skills.
Use of measuring equipment: calipers, micrometers, press, scales, compression gauge.
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires the employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Summary of Position
Inspects and processes incoming materials for quality and quantity.
Essential Job Requirements (MINIMUM):
Performs the following:
Inspects to ensure quality standards and conformance to CG PO, Engineering documents, material specification, accuracy and condition of incoming materials.· Basic experience with hand measurement tools i.e., Scales, Calipers, Radius Gauges, Pin Gauges to satisfy product acceptance.
Receives and stocks all incoming products and items.Correctly prepares inspection and receiving documentation and completes necessary forms (Inspection Plan).Operates forklift lift in an efficient and safe manner.Complies with company policies and procedures.Performs other duties as assigned..Work Standards
Receiving and on-docking all deliveries within a 24-hour window or less.
Setting high standards of performance for self and others; assuming responsibility and accountability for successfully completing assignments or tasks; self-imposing standards of excellence rather than having standards imposed.
Keeping area clean and organized to follow company’s lean & 5S manufacturing culture.
EDUCATION
High School or GED required.
EXPERIENCE
5 years of receiving experience in an in-house materials or inventory-based position required.
Experience in a manufacturing environment preferred but not required.
REQUIRED SKILLS
- Strong computer skills
- Strong internal & external communication skills.
- Strong interpersonal skills
- Strong mathematical skills
- Ability to operate a forklift
- Ability to read and understand complex written instructions, specifications documents, etc.
- Ability to properly use basic inspection tools such as: calipers, dial indicators, and pin gages
- Perform physical activities including the ability to lift and handle 40 lbs and stand for long periods of time
- Collaboration: Working effectively and cooperatively with others; establishing and maintaining good working relationships.
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.(This position is subject to the Export Control Laws, which requires employees to be one of the following: (a) a citizen of the United States; (b) a lawful permanent resident of the United States; or (c) a person admitted into the United States as an asylee or refugee)
Summary of Position
Executes the shipping function, as it relates to requisite paperwork, package preparation, and logistics associated with routing packages to appropriate carriers and time frames.
Essential Job Requirements (MINIMUM):
· Verifies and keeps records on outgoing shipments and prepares items for shipment.
· Studies shipping notices, bills of lading, invoices, orders and other records to determine shipping priorities, work assignments and shipping methods required to meet shipping schedules.
· Uses knowledge of shipping procedures and routes.
· Ensures accuracy, completeness and condition of shipments to include, but not limited to, test reports, material certifications, C of C, etc.
· Inspects and counts material/parts set for shipments.
· Compiles records of unfilled orders.
· Posts weight and shipping charges.
· Prepares bills of lading.
· Ability to verify inventory accuracy in the function of placing parts/materials into Finished Goods inventory.
· Use of ESI2000.
· Supplies support to other areas within the department, as necessary or required.
· Other duties as required or necessary beyond this scope.
Responsible for conforming to the company’s quality system procedures as documented.
Performs other duties as assigned.
EDUCATION:
High School or GED required. Technical training in inventory functions, or office administration training preferred.
EXPERIENCE:
1-2 years experience in an inventory-based position, or equivalent combination of education and experience preferred. Knowledge of shipping carriers, and experience in the inventory function of a manufacturing environment preferred.
REQUIRED SKILLS:
· Analytical and creative skills to find solutions to problems in a real time environment.
· Proficient using PC and software applications, i.e., MS Windows, MS Access, MS Excel, Internet, and menu driven programs.
· Ability to maintain records and filing system.
· Strong written and verbal communication skills
· Interpersonal/human relations skills
· Basic math skills with ability to use a calculator.
· Attention to detail.
· Sense of Urgency.
· Ability to work within a team environment
PREFERRED SKILLS:
Ability to speak clearly, read, write and receive verbal instructions.
Company DescriptionCascade Gasket specializes in Elastomer Seal & Gasket manufacturing exclusively for the aerospace industry. As an ISO 9001/ AS9100 certified “build to print” manufacturer, Cascade continues its pursuit of strict Lean Manufacturing Principles to produce “low volume high variety” products. Companies that do business with us do so with confidence in our quality, on time delivery, and excellent customer service.
