X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Provide day-to-day floor leadership and technical input to calibrate equipment, conduct tests, and to interpret, evaluate, and document results in accordance with procedures. The Level 3 shall be thoroughly knowledgeable with the scope and limitations of the respective method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of NDT personnel.
A successful candidate in this role is someone who enjoys working hands on, seeks to be a part of a team, and is passionate about NDT!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Website: https://www.appluslaboratories.com/global/en/
Aerospace Structural Testing at Applus+ Laboratories - YouTube
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
Education and Work Experience
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.High School Diploma or GED requiredTo perform this job successfully, the dedicated individual shall have sufficient education, training and experience to ensure qualification as a minimum in their respective method.Certifiable to Level 3 per the requirements of XRI 2002 (NAS 410 and SNT-TC-1A), i.e., 4 years as a Level 2 is required to qualify for Level 3 certification unless the following conditions are met (per XRI-2002 “A 2 year degree in engineering or science study at a technical school, college or university reduces the above to 2 years experience. A 3-4 year science or engineering undergraduate degree reduces the above to 1 year experience.Knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by XRI Testing.Have a general knowledge of other NDT methods and product manufacturing and inspection technologies used by XRI testing and its customers including, but not limited toLiquid Penetrant (FPI) (PT)Magnetic Particle (Mag) (MT)Radiography (X-ray) (RT)Digital Radiography (DDA) (DR)Computed Tomography (CT)Ultrasonic (UT) (Immersion) (Phased Array)To perform this job successfully, an individual shall have sufficient education, training and experience to ensure qualification in their respective method.Certificates and Licenses Required
Certifiable to Level 3 per the requirements of XRI 2002 (NAS 410 and SNT-TC-1A), i.e., 4 years as a Level 2 is required to qualify for Level 3 certification unless the following conditions are met (per XRI-2002 “A 2 year degree in engineering or science study at a technical school, college or university reduces the above to 2 years experience. A 3-4 year science or engineering undergraduate degree reduces the above to 1 year experience.Driver's LicenseThe intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
The Penetrant Testing (PT) Level 2 Inspector shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainees and Level 1 personnel.
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
We are seeking Level 2 Technicians to join our growing team! Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records.
A successful candidate in this role is familiar with the scope and limitations with the test method and perform the testing, calibration, interpretation, evaluation, and documentation in Penetrant Testing (PT).
They seek to be a part of a team and have a passion for nondestructive testing!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long-term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
Shift: 3rd shift availability preferred
Duties and Responsibilities
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the technique/method.
• Have the skills and knowledge to conduct systems performance checks in accordance with the applicable process standard.
• Capable of providing the necessary guidance and/or supervision to trainees and level 1 personnel.
• Be familiar with the codes, standards, and other contractual documents that control the methods as used by X-Ray Industries.
• When specified in the written practice, be capable of developing work instructions from the approved general procedures. Such work instructions shall require final approval by a level 3 certified in the method.
• Have a basic knowledge of the relevant product manufacturing and inspection technology.
• Perform other duties as assigned.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
Certificates and Licenses Required
• Certifiable to Level 2 per the requirements of NAS 410
• State ID Required
Other Requirements
Must be a U.S. citizen and legally authorized to work in the United States.Employment eligibility verification is required at the time of hire.Visa sponsorship is not available for this role.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
POSITION OVERVIEW
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
A successful candidate for the Xray Method Level 3 role is someone who enjoys working hands on, seeks to be a part of a team, and is passionate about NDT and Radiography !
Benefits Offered:
401k matchCompany provided life insurance and vision coverage benefitsMedical, dental, and vision, pet insurance, home and auto discounts, identity theft protection offered & much more! 2 weeks’ paid time off available immediatelyFirst, second, and third shifts available based on facility need’ All training provided in house! No travel involvedIndoor work environmentAerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
EDUCATION AND WORK EXPERIENCE
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.High School Diploma or GED requiredTo perform this job successfully, the dedicated individual shall have sufficient education, training and experience to ensure qualification as a minimum in / with Radiographic Testing.Certifiable to Level 3 per the requirements of XRI 2002 (NAS 410 and SNT-TC-1A), i.e., 4 years as a Level 2 is required to qualify for Level 3 certification unless the following conditions are met (per XRI-2002 “A 2 year degree in engineering or science study at a technical school, college or university reduces the above to 2 years experience. A 3-4 year science or engineering undergraduate degree reduces the above to 1 year experience.Knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s) as used by XRI Testing.Have a general knowledge of NDT methods and product manufacturing and inspection technologies used by XRI testing and its customers. Specifically:Radiography (X-ray) (RT)Digital Radiography (DDA) (DR) (CR) To perform this job successfully, an individual shall have sufficient education, training and experience to ensure qualification in their respective method.CERTIFICATES AND LICENSES REQUIRED
Must meet minimum company requirements to operate a company vehicle and be eligible for coverage under Company insurance program.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
A nondestructive testing (NDT) Level 2 shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainees and Level 1 personnel.
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
We are seeking Level 2 Technicians to join our growing team! Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records.
A successful candidate in this role is familiar with the scope and limitations with the test method and perform the testing, calibration, interpretation, evaluation, and documentation in their test method.
They seek to be a part of a team and have a passion for nondestructive testing!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
Duties and Responsibilities
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the technique/method.
• Have the skills and knowledge to conduct systems performance checks in accordance with the applicable process standard.
• Capable of providing the necessary guidance and/or supervision to trainees and level 1 personnel.
• Be familiar with the codes, standards, and other contractual documents that control the methods as used by X-Ray Industries.
• When specified in the written practice, be capable of developing work instructions from the approved general procedures. Such work instructions shall require final approval by a level 3 certified in the method.
• Have a basic knowledge of the relevant product manufacturing and inspection technology.
• Perform other duties as assigned.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
Certificates and Licenses Required
• Certifiable to Level 2 per the requirements of NAS 410
• State ID Required
Other Requirements
Must be a U.S. citizen and legally authorized to work in the United States.Employment eligibility verification is required at the time of hire.Visa sponsorship is not available for this role.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
A nondestructive testing (NDT) Level 2 shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainees and Level 1 personnel.
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
We are seeking Level 2 Technicians to join our growing team! Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records.
A successful candidate in this role is familiar with the scope and limitations with the test method and perform the testing, calibration, interpretation, evaluation, and documentation in their test method.
They seek to be a part of a team and have a passion for nondestructive testing!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
Duties and Responsibilities
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the technique/method.
• Have the skills and knowledge to conduct systems performance checks in accordance with the applicable process standard.
• Capable of providing the necessary guidance and/or supervision to trainees and level 1 personnel.
• Be familiar with the codes, standards, and other contractual documents that control the methods as used by X-Ray Industries.
• When specified in the written practice, be capable of developing work instructions from the approved general procedures. Such work instructions shall require final approval by a level 3 certified in the method.
• Have a basic knowledge of the relevant product manufacturing and inspection technology.
• Perform other duties as assigned.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
Certificates and Licenses Required
• Certifiable to Level 2 per the requirements of NAS 410
• State ID Required
Other Requirements
Must be a U.S. citizen and legally authorized to work in the United States.Employment eligibility verification is required at the time of hire.Visa sponsorship is not available for this role.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
A nondestructive testing (NDT) Level 2 shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainees and Level 1 personnel.
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
We are seeking Level 2 Technicians to join our growing team! Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records.
A successful candidate in this role is familiar with the scope and limitations with the test method and perform the testing, calibration, interpretation, evaluation, and documentation in their test method.
They seek to be a part of a team and have a passion for nondestructive testing!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
This is a traveling role.
Travel requirements : 75%+
Duties and Responsibilities
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the technique/method.
• Have the skills and knowledge to conduct systems performance checks in accordance with the applicable process standard.
• Capable of providing the necessary guidance and/or supervision to trainees and level 1 personnel.
• Be familiar with the codes, standards, and other contractual documents that control the methods as used by X-Ray Industries.
• When specified in the written practice, be capable of developing work instructions from the approved general procedures. Such work instructions shall require final approval by a level 3 certified in the method.
• Have a basic knowledge of the relevant product manufacturing and inspection technology.
• Perform other duties as assigned.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
Certificates and Licenses Required
• Certifiable to Level 2 per the requirements of NAS 410
• State ID Required
Other Requirements
Must be a U.S. citizen and legally authorized to work in the United States.Employment eligibility verification is required at the time of hire.Visa sponsorship is not available for this role.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
The NDT Level 3 Consultant will provide consulting services to customers requiring level 3 services in one or more primary NDT inspection methods: ET, MT, PT, RT, UT &/or VT. Commitment to customer service will be essential to be successful in this position.
X-Ray Industries is looking for driven professionals to join our team as a Level 3 Consultant. Consultants work with various teams, both internal and external, to provide Level 3 services, conduct NADCAP audits, and lead formal training classes A successful candidate in this role is passionate about NDT, has exceptional communication skills, and can thrive in an autonomous work environment.
The Training, Consulting, and Services Group consists of a fully remote team. Candidates can live anywhere in the continental US. Preferred areas are in Michigan, South Carolina, Ohio, and Connecticut.
This role requires approx. 75- 80% of travel Monday through Friday, some weekend travel may apply. Technicians must be certified to NAS-410.
This is a great opportunity to travel throughout the US!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
Duties and Responsibilities
Provide L3 oversight to customers including but not limited to:
• Technical Procedure Development
• NDT Process Implementation
• NDT Engineering
• Employee Certification
• Process Control Documentation
• Process Auditing
• Nadcap Compliance Audit Preparation
• Qualifying for a Prime Specific Certification
• Radiation Safety support
• Root Cause / Corrective Action resolution
• Technique approval
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
• Experience in similar role/Aerospace Industry strongly preferred.
• Must have excellent written and verbal communication skills and the ability to maintain confidentiality.
• Minimum of 3 years’ experience performing Level 3 duties and responsibilities is a plus!
Certificates and Licenses Required
• Must meet minimum company requirements to operate a company vehicle and be eligible for coverage under Company insurance program.
• Current Level 3 Certification.
• NAS410 certifications will be required
• ASNT certifications helpful although not required
• Aerospace prime approvals will be required, such as: Honeywell, Rolls Royce and Pratt & Whitney
The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
Read LessCompany Overview
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Non-destructive testing (NDT) is a way to detect and evaluate flaws in materials. X-Ray Industries provides opportunities to learn cutting edge methodology in the NDT industry. Trainees work closely with highly certified technicians to learn the basics of their respective method with a goal to become a multi-certified NDT technician.
A successful candidate in this role is someone who enjoys working hands on, seeks to be a part of a team, and is looking for a career in an expanding industry. This is an entry level position- no prior knowledge required!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED is required.
• State ID required
Duties and Responsibilities
• Assist Technician in project execution and daily tasks assigned as required.
• Assist Technicians with organizing and reporting of service provided
• Prepare, set-up, and complete all necessary paperwork as required by client and company requirements
• Set-up boundaries and surveillance of work area, if required, and prevent unauthorized personnel from entering work area
• Follow and enforce the Company required safe work practices and procedures at all times.
• Responsible for replenishing and organizing the required supplies, as needed, to perform assign methods.
• Responsible for cleanliness of all work areas
• Observes test procedures and product compliance to learn internal and industry specifications.
• Observe and learn the procedures required to perform work and gain certification in the required NDT methods
• Observe and learn proper documentation process required for NDT testing
• Demonstrate excellent communication skills, professionalism, and promote a positive customer service attitude toward internally and externally.
• Enforce and abide the requirements of safe operation and personal safety using required Personal Protective Equipment and Safe Practices per company policy.
• Perform other job-related tasks as assigned by management.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required. Documentation is required.
The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
About Us:
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
Position Overview
A nondestructive testing (NDT) Level 2 shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainees and Level 1 personnel.
X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities.
We are seeking Level 2 Technicians to join our growing team! Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records.
A successful candidate in this role is familiar with the scope and limitations with the test method and perform the testing, calibration, interpretation, evaluation, and documentation in their test method.
They seek to be a part of a team and have a passion for nondestructive testing!
Benefits Offered:
• Medical, dental, and vision offered
• Company provided short term and long term disability and life insurance benefits
• 401k match
• Vacation available
• First, second, and third shifts available based on facility need
• All training provided in house!
• No travel involved
• Indoor work environment
...And much more!
Aerospace Structural Testing at Applus+ Laboratories - YouTube
Website: https://www.appluslaboratories.com/global/en/
*Documentation of high school diploma or GED, OJT hours, and previous certification hours required.
Duties and Responsibilities
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the technique/method.
• Have the skills and knowledge to conduct systems performance checks in accordance with the applicable process standard.
• Capable of providing the necessary guidance and/or supervision to trainees and level 1 personnel.
• Be familiar with the codes, standards, and other contractual documents that control the methods as used by X-Ray Industries.
• When specified in the written practice, be capable of developing work instructions from the approved general procedures. Such work instructions shall require final approval by a level 3 certified in the method.
• Have a basic knowledge of the relevant product manufacturing and inspection technology.
• Perform other duties as assigned.
Education and Work Experience
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
• High School Diploma or GED required
Certificates and Licenses Required
• Certifiable to Level 2 per the requirements of NAS 410
• State ID Required
Other Requirements
Must be a U.S. citizen and legally authorized to work in the United States.Employment eligibility verification is required at the time of hire.Visa sponsorship is not available for this role.The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description.
The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.
Lab Manager
Applus+ Keystone Compliance, a regulatory compliance test, is currently seeking candidates for a Lab Manager position. The successful candidate will possess a strong work ethic, excellent character, and a commitment to producing high-quality work. We are looking for someone who can work independently, is self-motivated, and can manage their time effectively.
Position SummaryThe Product Safety Laboratory Manager is responsible for the technical, operational, and quality leadership of Keystone Compliance’s Product Safety testing laboratory. This role ensures accurate, timely, and compliant execution of product safety testing services while maintaining accreditation requirements, developing staff capabilities, and supporting customer success.
The Laboratory Manager oversees daily lab operations, manages technical staff, ensures adherence to applicable product safety standards, and works cross‑functionally with sales, quality, and engineering teams to deliver high‑quality testing and certification services aligned with Keystone Compliance’s commitment to technical excellence and customer guidance.
Key ResponsibilitiesLaboratory Operations & Technical OversightLead day‑to‑day operations of the Product Safety laboratory, ensuring safe, efficient, and compliant execution of testing activities.Ensure accurate application and interpretation of applicable product safety standards (e.g., IEC, UL, EN, CSA, and other national/international safety standards).Review and approve test plans, test setups, and final test reports to ensure technical accuracy and consistency.Oversee equipment utilization, maintenance, calibration status, and capital planning for Product Safety test systems.Quality & AccreditationEnsure ongoing compliance with ISO/IEC 17025 requirements as they apply to Product Safety testing activities.Support internal and external audits, including accreditation body assessments and customer audits.Collaborate with the Quality Manager to address nonconformances, corrective actions, and continuous improvement initiatives.Maintain technical documentation, procedures, and work instructions related to Product Safety testing.Team Leadership & DevelopmentSupervise, mentor, and develop Product Safety technicians and engineers.Assign workloads, manage priorities, and ensure adequate staffing to meet customer commitments.Identify training needs and support technical competency development for laboratory personnel.Foster a culture of safety, accountability, and continuous improvement within the lab.Customer & Business SupportServe as a technical escalation point for customers regarding Product Safety testing requirements, results, and compliance pathways.Support Sales and Project Management teams by providing technical input during quoting, test planning, and customer consultations.Participate in customer meetings to clarify requirements, explain test outcomes, and support mitigation strategies when issues arise.Contribute to service development and process improvements that enhance customer experience and operational efficiency.Safety & ComplianceEnsure laboratory safety procedures are followed at all times, including proper handling of test samples, high‑voltage equipment, and environmental hazards.Promote and enforce Keystone Compliance’s safety policies and best practices.Required QualificationsBachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related technical field (or equivalent experience).Minimum 5–7 years of experience in Product Safety testing or a related compliance laboratory environment.Demonstrated experience interpreting and applying product safety standards (IEC, UL, EN, CSA, etc.).Prior experience working in an ISO/IEC 17025–accredited laboratory.Proven leadership or supervisory experience in a technical or laboratory setting.Strong technical writing skills with experience reviewing and approving formal test reports.Preferred QualificationsExperience serving as a Technical Manager or acting technical authority under ISO/IEC 17025.Familiarity with combined Product Safety and EMC testing environments.Experience supporting customer product mitigations and design consultations.Exposure to multiple industries such as industrial equipment, laboratory instruments, household/commercial appliances, or similar regulated products.Key CompetenciesStrong technical judgment and attention to detailEffective people leadership and communication skillsAbility to manage multiple priorities in a fast‑paced lab environmentCustomer‑focused mindset with the ability to explain complex technical concepts clearlyCommitment to quality, safety, and continuous improvementWhat We OfferOpportunity to lead a critical technical function within a growing compliance and testing organizationCollaborative environment with cross‑functional exposure to Sales, Quality, and Engineering teamsCompetitive compensation and benefitsProfessional development and advancement opportunities within Keystone Compliance and the broader Applus+ organizationApplus+ Laboratories is an equal opportunity employer. We welcome and encourage applications from individuals of all backgrounds and provide accommodations at all hiring stages. If you require accommodations, please let us know in advance.
We appreciate all applicants' interest; however, only those selected for an interview will be contacted. No agencies, please.
Read Less