Company Detail

Job Openings

• A

  Senior HW Dev Engineer , Customer Terminal  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon LEO is an initiative to increase global broadband access throug... Read More

  Amazon LEO is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Amazon LEO will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.
  
  As a Senior Hardware Engineer, you will be a part of the team working on the development of advanced Customer Terminal products. You will own or contribute to the following:
  
  - Design high-speed digital and/or RF circuitry in collaboration with various teams
  - Design and optimization of different blocks of electronics sub-systems
  - Schematic capture and lead PCB layout
  - Design DC/DC power supply and Point of Load
  - Support flow-down requirement definitions and generate test plans/procedures
  - Board bring-up and perform test campaigns of modules and subsystems
  - Support design of automated test systems, test fixtures and factory test
  - Support the transition of the designs to mass production
  
  Key job responsibilities
  - Develop innovative customer terminal hardware architectures with partner teams.
  - Schematic generation & review.
  - Guide board layout through ok2fab.
  - Support integrated product team as the EE hardware single threaded owner.
  - Lead hardware validation for your designs & present to Director level leadership.
  - Support factory team, help debug issues on the line, and burn down open tickets ahead of build readiness reviews.
  - Support internal customers and participate in cross-functional troubleshooting campaigns.
  
  Export Control Requirement:
  
  Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  About the team
  The Customer Terminal Hardware Team is responsible for the full life cycle of product design. We work with partner teams to architect terminal designs, generate schematics, oversee layout, lead board bring-up and first article inspection in the factory, develop factory test requirements, lead full hardware validation, and support factory builds through every stage of the xVT phase gate process. We are responsible for closing out issues discovered in manufacturing and delivering high quality designs that will meet functional, yield, and lifetime requirements to delight our customers.
  BASIC QUALIFICATIONS - Bachelor's degree or above in electrical engineering, computer engineering, or equivalent
  - Experience in hardware lab equipment such as digital scopes, logic analyzers, and soldering tools
  - 7+ years of experience in high-speed digital design and/or RF designs
  - Experience in signal and power integrity design and analysis
  - Experience with mixed signal PCB layout designs
  - Experience in using schematic capture tool and PCB layout viewer
  - Experience with board bring up and debugging in lab environment
  PREFERRED QUALIFICATIONS - Master's degree or above in electrical engineering, computer engineering, or equivalent
  - Experience with analog or board simulation (ex: SPICE, HyperLynx)
  - Experience programming with at least one software programming language
  - Familiarity with analog electronics fundamentals (transistors, op-amps, filters, etc)
  - Familiarity with DC power supply designs
  - Familiarity with EMI/EMC design mitigation
  - Experience with Mentor Graphics or Cadence layout tools
  - Proficiency in developing lab test programs for instrument control
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 137 700.00 USD annually Read Less

  Apply Now
• A

  Bus Hardware Engineering Manager, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission... Read More

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity.
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  The Bus Hardware Engineering Manager leads the execution and integration of mechanical hardware for the Amazon Leo satellite bus, including bus structures, vehicle design, and launch support. This role is responsible for translating vehicle architecture and requirements into qualified, producible hardware while ensuring mechanical integrity, interface alignment, and readiness for production and launch operations. The manager leads a multidisciplinary team that works closely across design, analysis, manufacturing, integration, and launch partners to deliver reliable hardware across multiple vehicle configurations and lifecycle phases.
  
  Key job responsibilities
  - Lead a multidisciplinary mechanical hardware team covering bus structures, vehicle design, and launch support
  
  - Own execution of mechanical designs, layouts, and integration for the satellite bus
  
  - Drive day-to-day coordination across sub-teams to ensure cohesive system-level execution
  
  - Partner closely with electrical, thermal, structural analysis, manufacturing, and operations teams to resolve interfaces and tradeoffs
  
  - Ensure mechanical designs meet performance, qualification, producibility, and launch requirements
  
  - Support development, qualification, and acceptance test campaigns for bus hardware
  
  - Own mechanical readiness for vehicle integration, transport, storage, and launch activities
  
  - Identify, escalate, and resolve technical and schedule risks impacting vehicle delivery
  
  - Provide technical mentorship, coaching, and performance management for engineers and designers
  
  - Support staffing, prioritization, and execution planning in alignment with program needs
  
  A day in the life
  In this role, you balance hands-on technical leadership with team coordination and execution. Your day may include reviewing mechanical designs, aligning sub-teams on priorities, resolving interface issues with electrical or manufacturing partners, and supporting integration or launch activities. You work closely with engineers, designers, and launch teams to ensure hardware is ready for each phase of the vehicle lifecycle. Throughout the day, you coach team members, manage technical risk, and keep execution moving across multiple vehicle configurations.
  
  About the team
  The Bus Hardware team is responsible for delivering the mechanical backbone of the Amazon Leo satellite bus. The team includes engineers and designers working across structures, vehicle CAD, and launch support, operating as a tightly integrated group rather than separate functions. The team collaborates closely with electrical, thermal, manufacturing, and operations partners to ensure hardware is robust, producible, and ready for launch. Ownership, technical rigor, and strong cross-functional coordination are central to how the team operates.
  BASIC QUALIFICATIONS - Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or an equivalent field
  - 2+ years of people management experience
  - 7+ years of experience in mechanical engineering supporting complex hardware systems
  - Experience with mechanical design and integration of aerospace or high-reliability hardware
  - Experience working across multiple disciplines (electrical, thermal, manufacturing, test)
  - Strong communication skills and ability to lead technical discussions and reviews
  PREFERRED QUALIFICATIONS - Master's degree in Mechanical or Aerospace Engineering
  - Experience with satellite bus structures, launch vehicle interfaces, or spacecraft integration
  - Experience supporting hardware through qualification, production, and launch operations
  - Proficiency with 3D CAD tools (e.g., Siemens NX) and engineering drawing standards
  - Experience working in high-rate or multi-configuration production environments
  - Demonstrated ability to lead cross-functional problem solving under schedule pressure
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, REDMOND - 151 300.00 USD annually Read Less

  Apply Now
• A

  Sr. Thermal Design Engineer, Amazon LEO  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission... Read More

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity.
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  We are looking for a Sr. Thermal Design Engineer who combines strong technical, research and analytical capabilities with a demonstrated ability to get the right work done quickly and effectively. The successful candidate must have experience working on active thermal control of space vehicles, producing top notch thermal analysis and providing essential thermal related input and recommendations to system architects and subsystem leads.
  
  Key job responsibilities
  - Support extensive architectural trades with preliminary thermal analysis on spacecraft and subsystems for orbital operational conditions and vehicle control options.
  - Perform detailed and comprehensive analyses of active thermal control systems, including all required hardware and corresponding tradeoffs.
  - Drive design optimization for performance, mass and cost, while meeting system reliability requirements through application of a range of thermal control hardware options.
  - Define, lead and execute thermal cycling and thermal vacuum tests for development and qualification testing at subsystem and vehicle levels.
  - Support the procurement department in sourcing strategy for all required components.
  - Define and select test equipment as needed (e.g., TVAC and thermal chambers, sensors, data logging equipment).
  - Conduct testing of prototypes and engineering models for fast design feedback loops.
  - Develop and execute reliability plan for demonstration of lifetime of active components.
  - Document trades and design evolution, and present results during design reviews.
  BASIC QUALIFICATIONS - Bachelor's degree in mechanical engineering or equivalent
  - 5+ years experience with thermal control of spacecraft, and delivering solutions optimized for mass, cost, reliability, performance, and manufacturability.
  - 3+ years of experience with thermal simulation software (e.g., Thermal Desktop (SINDA), Ansys), and programming (e.g., python, Matlab).
  - 3+ years experience with test planning, test set-up, results correlation and system verification for production.
  - 3+ years experience in development and/or selection of passive and active thermal control hardware.
  PREFERRED QUALIFICATIONS - Advanced degree (Master's or PhD) in mechanical engineering or related field.
  - Experience developing hardware and spacecraft that have been to space, and which successfully operated as intended.
  - Developing spacecraft thermal solutions for high power flux components .
  - CAD skills (NX or Solidworks)
  - Experience with interpreting and correlating data from on-orbit telemetry.
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 137 700.00 USD annually Read Less

  Apply Now
• A

  Sr. Power Avionics Test Engineer, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission... Read More

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity.
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  Key job responsibilities
  We are looking for an excellent engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively:
  
  • Design and deliver complex avionics test rack hardware that enables efficient development, production, and verification of flight electronics.
  • Own test rack hardware and software requirement definition, translating device-level specifications and performance needs into clear, scalable test system designs.
  • Derive and validate test requirements from engineering design documents, ensuring comprehensive test coverage.
  • Investigate and resolve test issues across production, regression, and qualification environments, using data-driven RCCA.
  • Review and approve manufacturing processes and work instructions related to assembly and test of avionics devices.
  • Develop training, documentation, and tooling that enable operators, technicians, and engineers to use test racks safely and effectively.
  • Continuously improve test system reliability, diagnostics, throughput, and scalability.
  • Collaborate closely with cross-functional teams (SW, QA, Production Operations, etc.) to ensure test systems meet program milestones.
  • Demonstrate end-to-end ownership from concept through deployment, including architecture, design reviews, implementation, verification, and support.
  
  A day in the life
  As a Senior Power Avionics Test Engineer, you will work within the avionics engineering organization to design and own test rack hardware for power avionics LRUs. You translate device-level requirements into clear test system design requirements, drive design reviews, and deliver reliable hardware that supports development, qualification, and production test needs. You collaborate closely with electrical, software, and manufacturing teams to ensure interfaces, operational constraints, and performance goals are well understood and correctly implemented.
  
  Your day spans concept through deployment: developing and reviewing requirements, designing test system hardware, debugging issues in production or regression test environments, and supporting technicians and operators who rely on your systems. You own documentation, provide training, and raise the bar on test coverage and reliability. You strive to make your system scale reliably, drive continuous improvement, and maintain long-term ownership that enables fast, high-quality delivery of mission-critical avionics.
  
  You will work with a team of top-notch engineers and collaborate with multiple other spacecraft design and integration teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on tens of millions of people!
  
  About the team
  Our team is responsible for designing and delivering power avionics subsystems such as propulsion control, solar array deployment and control, and magnetorquer bars. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Amazon Leo. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities!
  BASIC QUALIFICATIONS - Bachelor's degree in electrical engineering, computer engineering, or equivalent
  - 5+ years of experience designing hardware for automated test equipment or embedded electronic systems
  - Experience defining hardware and software requirements for test systems or complex electronics
  - Proficiency in schematic design, PCB layout best practices, and electrical debugging techniques
  - Hands-on experience with test instrumentation (oscilloscopes, logic analyzers, DAQs, power supplies, signal generators)
  - Demonstrated ability to root-cause hardware and system-level failures
  - Ability to read and interpret electrical design documents, performance specifications, and manufacturing work instructions
  - Strong verbal and written communication skills
  - Ability to own end-to-end delivery of test solutions in fast-paced, ambiguous technical environments
  PREFERRED QUALIFICATIONS - Master's degree in electrical engineering or equivalent
  - Knowledge of programming or other scripting languages and coding skills (C/C++/C#, Node.JS, Java, Python, PHP, Ruby)
  - 7+ years of experience designing hardware for automated test equipment or embedded electronic systems
  - Experience developing test rack SW
  - Experience in test system performance analysis
  - Experience in developing systems to rigorous quality, reliability, or safety standards (e.g., aerospace, automotive, medical, or defense)
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 137 700.00 USD annually Read Less

  Apply Now
• A

  Senior EMC/EMI Engineer - Antenna, Hardware Development  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon LEO is an initiative to increase global broadband access throug... Read More

  Amazon LEO is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Amazon Leo will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.
  
  Amazon seeks an Electromagnetic Interference and Compatibility (EMI and EMC) Engineer to join the Antenna Team. As a Kuiper EMC/EMI engineer you will develop requirements, review designs and build test capability for complex payload subsystems for low-earth-orbit satellites. In this role you will influence decision makers on the process, procedures and necessary tests required to achieve EMI/EMC qualified hardware. You will execute tests and provide leadership for other engineers and technicians during test campaigns. The key responsibilities of the role are:
  • Define requirements for testing and qualifying subsystems
  • Perform analysis of radiated emissions and susceptibility (RE/RS)
  • Develop models for interference and shielding issues to mitigate and control emissions and susceptibility.
  • Work with electronic component design teams to communicate requirements related to electromagnetic environments such as shielding, grounding, bonding and isolation
  • Work with subsystem design owners on EMI related challenges
  • Define and coordinate EMI and EMC testing for a satellite and its subsystems
  • Coordinate requirements and validation with Launch Providers' EMI and EMC teams.
  • Develop and maintain EMI/EMC test labs and equipment and support execution of EMI/EMC testing for a satellite and its subsystems
  • Identify emission and susceptibility non-conformance. Debug all failures to root-cause and provide manufacturable solutions.
  
  Export Control Requirement
  Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering or a related field
  - 5+ years of experience in a hardware development role focusing on electromagnetic environments or EMI/EMC.
  - 5+ years of experience with defining and conducting EMI/EMC testing for electronic components and systems.
  PREFERRED QUALIFICATIONS - PhD or Master in Electrical Engineering, Physics or related degree
  - 7+ years of experience in spaceflight avionics development as an electromagnetic environments effects engineer.
  - Experience with EMC industry standards and specifications for aerospace such as MIL-STD-461 and AIAA S-121A.
  - Experience with using analysis to define requirements for emissions and susceptibility of avionics components.
  - Experience modelling electromagnetic environments using electromagnetic (EM) computational commercial software.
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 137 700.00 USD annually Read Less

  Apply Now
• A

  Sr. Electrical Engineer, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Our goal is to be Earth's most customer centric company, and we are ju... Read More

  Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design.
  
  Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are looking for the next member of our avionics development team who are building critical components for Amazon Leo satellites. We are looking for an exceptional engineer who combines superb technical and analytical capabilities with a demonstrated ability to deliver hardware.
  
  Export Control Requirement:
  Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  Key job responsibilities
  • Design digital and analog circuits in collaboration with various teams.
  • Design for high-speed serial links that interface to FPGA and/or SoC circuitry
  • Perform ECAD schematic capture of circuit designs.
  • Lead design reviews of hardware systems; such as architecture, schematic, PCB layout reviews.
  • Develop bring-up test plans, as well as leading qualification and production test plan development.
  • Lead debug efforts for avionics and power subsystems.
  • Lead requirement derivation and traceability for hardware subsystems.
  • Support subsystem production ramp and larger system integration.
  • Be a technical leader/role model; instilling best practices across the full development lifecycle.
  
  A day in the life
  As a Sr. Electrical Engineer, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs. Candidates must be comfortable working in a fast-paced production environment where product owners are expected to deliver results by solving technical problems quickly.
  
  About the team
  Our team is responsible for delivering production hardware subsystems for the satellite gateway assembly. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Amazon Leo. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities.
  BASIC QUALIFICATIONS - 5+ years of hardware engineering experience
  - 5+ years of experience in using ECAD tools for schematic capture and PCB layout review.
  - 5+ years of experience board bring up and debugging in lab environment.
  PREFERRED QUALIFICATIONS - Master's degree in electrical engineering, computer engineering, or equivalent
  - Experience working with interdisciplinary teams to execute product design from concept to production
  - Experience with the project management of technical projects
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit . This position will remain posted until filled. Applicants should apply via our internal or external career site. Read Less

  Apply Now
• A

  Electrical Engineering Manager - Launch Vehicle Integration, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission... Read More

  Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity.
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  As an Electrical Engineering Manager for Launch Vehicle Integration, you will lead a team responsible for electrical interfaces supporting satellite integration and launch operations. You will provide technical leadership, review and guide engineering work, and coordinate closely with partner teams to support integration, production, and mission execution. This role requires strong engineering judgment, the ability to operate in a fast-paced and ambiguous environment, and a commitment to high-quality, schedule-driven execution while scaling and developing a high-performing engineering team.
  
  Key job responsibilities
  We are seeking an excellent engineering leader who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively. In this role you will:
  
  • Provide technical guidance and decision-making support to engineers working satellite integration and EGSE development
  • Prioritize team work based on integration schedules, production needs, and mission priorities
  • Coach and mentor engineers through design reviews, test readiness reviews, and problem resolution
  • Champion satellite health during integration, identifying and resolving issues before they impact mission readiness
  • Capable of reviewing electrical interface designs and analyses from third-party developers, ensuring requirements are met and risks are understood and mitigated
  • Drive continuous improvement in how the team executes reviews, testing, and qualification activities
  • Balance near-term execution needs with longer-term team development and technical roadmap planning
  • Support 10-15% travel to launch sites and external vendors
  • Be a technical role model; instilling best practices across the full development cycle
  
  This role is ideal for a candidate who enjoys being close to the technical work/details, values high engineering standards, and takes pride in building and supporting a strong, capable team. If this sounds like the role for you, come make history with us!
  
  A day in the life
  As an Electrical Engineering Manager, you will lead the Launch Vehicle Integration - Electrical Engineering development team, supporting satellite integration and launch vehicle interfaces. Your time will be split between reviewing technical work, providing technical direction to your team, and coordinating with partner teams to support ongoing integration and production activities.
  
  You will also spend time coaching engineers and helping the team operate effectively as it scales, while regularly making technical decisions related to requirements compliance, test adequacy, and qualification readiness. You will hold a high bar for engineering quality while keeping work moving forward.
  
  On a given day, you may review electrical interface designs or test results from your team and third-party developers; help resolve issues identified during or prior to satellite integration; support the authoring and execution of system qualification reviews; or provide guidance on EGSE design, use, and deployment. You will work closely with mission management, manufacturing, and integration teams to align priorities, manage risk, and support schedule-driven execution.
  
  This role requires comfort operating in a fast-paced, sometimes ambiguous environment where priorities can change and issues must be addressed quickly to support integration and mission needs. You will work with a team of top-notch engineers and collaborate with multiple spacecraft design and integration teams. Along the way, we guarantee that you will learn a lot, have fun, and make a positive impact on tens of millions of people.
  
  About the team
  Our team is responsible for delivering launch vehicle integration flight and ground electrical interfaces, and ground support equipment supporting Amazon Leo's satellite constellation. We take ownership and work hard to deliver the highest quality solutions to support the long-term success of Amazon Leo. This team consists of a broad set of technical backgrounds, and we look forward to welcoming people that are excited to help us deliver broadband internet to underserved communities!
  BASIC QUALIFICATIONS - Bachelor's degree in electrical engineering or equivalent
  - 3+ years of engineering team management experience
  - 5+ years of experience in electrical engineering within aerospace, defense, or similarly complex hardware environments
  - Experience owning or supporting electrical interfaces between independently-developed systems
  - Demonstrated experience reviewing third-party designs for requirements compliance, test adequacy, and qualification completeness
  - Strong understanding of requirements flow-down, verification planning, and configuration control
  - Proven ability to balance technical depth with execution priorities in a fast-paced production and integration environment
  - Excellent communication skills, with experience interfacing across engineering, manufacturing, integration, and program/mission teams
  PREFERRED QUALIFICATIONS - Master's degree in Electrical Engineering or a related field
  - Experience with the project management of technical projects
  - Experience supporting satellite integration and/or launch vehicle interfaces
  - Familiarity with satellite power systems, charging operations, and health monitoring
  - Experience designing or owning spacecraft EGSE or test systems used for hardware integration and verification
  - Background in working with external suppliers or partners for hardware development
  - Experience supporting production or high-cadence integration environments
  - Prior experience scaling a team that is operating under schedule pressure
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 151 300.00 USD annually Read Less

  Apply Now
• A

  Manager, PCBA Aerospace Manufacturing Test Engineering, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Bellevue

  Posted: 24/03/2026

  Apply Now

  Project Kuiper is Amazon's low Earth orbit satellite broadband network... Read More

  Project Kuiper is Amazon's low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  As PCBA Aerospace Manufacturing Test Engineering Manager, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Amazon Leo internal test development teams and our manufacturing partners. You will ensure successful test deployment by working with your team to document procedures, train CM personnel, and providing ongoing support. You will have extensive debugging experience with the ability to dive deep, determine the root-cause of a test failures, and train others to do the same.
  
  Key job responsibilities
  • Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.
  • Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.
  • Analyze data to identify failure trends and provide recommendations PCBA, process, and test system improvement.
  • Develop procedures and documentation for use by test operators.
  • Train operators on test processes and support recurring certification programs.
  • Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.
  • Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.
  • Work with your team to accomplish short-term objectives and implement strategic initiatives.
  
  A day in the life
  Come solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, high performance, low-cost satellite system. As a Sr. PCBA Aerospace Manufacturing Test Engineering Manager, you have the ability to dive deep on the details to identify, understand and solve difficult technical problems and also utilize a system level approach to prioritize issues for the whole program. You thrive in a hands-on environment and will spend time in the office, on the factory floor at manufacturing partners, and in the lab to execute the Amazon Leo's mission.
  
  About the team
  The PCBA Aerospace Manufacturing Test Engineering team delivers and deploys test systems to our CM's for all Amazon Leo satellite PCBAs. This is an inclusive, inter-disciplinary team that is committed to performance, quality, & reliability. Your breadth of exposure will be immense as you collaborate with other core groups, helping to guide the test systems from design to production and operation.
  
  Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon's culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
  BASIC QUALIFICATIONS - 7+ years of new hardware products development experience
  - 7+ years of engineering team management experience
  - Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical field
  - Experience in engineering team management
  - Experience in new hardware product development
  - Experience in DFx (cost, test, manufacturing)
  - Experience with the project management of technical projects
  PREFERRED QUALIFICATIONS - Master's degree in Electrical, Mechanical, Power Engineering, or a related field
  - Knowledge of AWS or cloud technologies
  - Experience developing products for large volume production
  - Experience managing teams of 8+ engineers
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Bellevue - 151 300.00 USD annually Read Less

  Apply Now
• A

  Software Manager Antenna, Amazon Leo  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  Amazon LEO is an initiative to increase global broadband access throug... Read More

  Amazon LEO is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Amazon LEO will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.
  
  We are looking for a Software Development Manager to lead the software team that builds the frameworks, tools, and data systems used to test, calibrate, validate, and monitor our phased array antennas and RF communication systems at scale. Your team will sit at the intersection of hardware, embedded systems, and cloud-scale software, and will directly impact the performance of antennas and terminals deployed on satellites and at customer sites.
  
  You will hire and develop a team of software and systems development engineers that build automation for performance testing and calibration, run large-scale data and ML pipelines, and deliver tools that make it easy for RF, antenna, EMI/EMC, and validation engineers to understand and improve system performance.
  
  Key job responsibilities
  - Own the software roadmap for calibration, validation, and system performance tools across phased array systems, RF communications, and customer/satellite terminals.
  - Build and lead a team of Software Development Engineers and Systems Development Engineers; set goals, define growth plans, and maintain a high engineering bar for design, code quality, and operations.
  - Architect and deliver software frameworks that automate performance testing and calibration of phased array antenna systems, from lab benches and chambers to manufacturing and field deployments.
  - Partner with phased array design, RF communications, EMI/EMC, and calibration/validation teams to translate system requirements and link budgets into concrete software and data problems, including KPIs, acceptance criteria, and automated checks.
  - Lead the design of data ingestion, storage, and analytics pipelines that collect results from test racks, chambers, and deployed terminals, enabling deep analysis, dashboards, and visualizations of array and RF performance.
  - Collaborate closely with data/ML and system engineers to embed anomaly detection, fleet-wide monitoring, and ML-based diagnostics into calibration and validation workflows.
  - Ensure your team delivers reliable, secure, and scalable services by driving best practices in SDLC, CI/CD, testing, observability, and operations, including on-premise and AWS-based solutions.
  - Work hands-on with hardware when needed from instrument control APIs to test rack integration to make sure software solutions align with real-world constraints in the lab and on the factory floor.
  - Represent the team in roadmap, planning, and status reviews, communicating trade-offs, dependencies, and risks to partner teams and leadership.
  
  You are comfortable with ambiguity, enjoy building in a space where the problem has never been solved at this scale before, and can balance technical depth with people leadership and delivery.
  
  Export Control Requirement:
  Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  A day in the life
  This Software Development Manager role is part of the Phased Array Systems organization for Amazon Leo. Our broader org owns:
  
  - Phased array systems: system-level architecture and performance of digital phased arrays and RF chains
  - Phased array design: element, aperture, and module design across space and ground segments
  - EMI/EMC: electromagnetic compatibility for payloads, terminals, and supporting electronics
  - RF communications systems: link design, modem/waveform integration, and end-to-end RF performance
  - Calibration & validation: algorithms, test systems, and field validation for antennas and RF systems
  
  The software team you will lead builds the software backbone that ties these groups together. We own the tools that test, calibrate, and validate antenna and RF performance from early prototypes through mass production and deployment. We work directly with antennas, RF front-ends, chambers, test racks, and fleet telemetry, operating at the intersection of RF hardware, software automation, and large-scale system integration.
  
  We leverage AWS and scalable software architectures to accelerate development, automate validation, and deliver reliable test systems used across Leo. If you want to see your team's software directly affect the performance of real hardware in orbit and in customers' homes, this is the place to do it.
  BASIC QUALIFICATIONS - 3+ years of engineering team management experience
  - 7+ years of working directly within engineering teams experience
  - 3+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience
  - 8+ years of leading the definition and development of multi tier web services experience
  - Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations
  - Experience partnering with product or program management teams
  PREFERRED QUALIFICATIONS - Experience in communicating with users, other technical teams, and senior leadership to collect requirements, describe software product features, technical designs, and product strategy
  - Experience in recruiting, hiring, mentoring/coaching and managing teams of Software Engineers to improve their skills, and make them more effective, product software engineers
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 184 200.00 USD annually Read Less

  Apply Now
• A

  Senior FPGA Engineer, LEO Payload FPGA, Amazon Leo Hardware Development  

  Amazon Kuiper Manufacturing Enterprises LLC

  Permanent - Redmond

  Posted: 24/03/2026

  Apply Now

  LEO is Amazon's low Earth orbit satellite broadband network. Its missi... Read More

  LEO is Amazon's low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.
  
  The Role:
  
  Create FPGA solutions to support LEO's satellite communication system. This is a unique opportunity to define a new system with few legacy constraints. The FPGA design engineer will work with systems teams to define/develop/implement/test/release FPGA based solutions to enable LEO. This will focus on creating digital designs for networking functions using the latest generations of FPGA technologies and modern FPGA design processes and tools.
  
  In this role you will:
  
  Have ownership of one or more FPGA bitstreams. - Create and release FPGAs through the development phases of uArchitecture-RTL Design-Physical Implementation-Timing Closure-Simulation Validation- Lab Based Silicon Validation
  
  Collaborate with network communication system architects to define and design/implement/test/release/support networking functions targeted to FPGA technology
  
  Collaborate with Digital Communications/Networking system architects and design engineers to implement digital logic functions in FPGAs.
  
  Collaborate with system architects and design engineers to implement digital logic functions in FPGA prototypes to validate/tradeoff architecture & design alternatives
  
  Collaborate with systems architects, HW engineering design teams & FW/SW design teams to bring up and test systems combining FPGA, firmware, RF, and Networking functions.
  
  Drive trade-off analysis to benefit customer experience and optimization of target technology resources for cost/size/power/performance/features
  
  Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
  
  Key job responsibilities
  -Design, develop, and implement complex FPGA architectures using Verilog HDL
  -Lead FPGA design efforts for Versal ACAP and IGLOO2 platforms from concept through production
  -Develop and optimize RTL code for high-performance, resource-efficient designs
  -Perform timing analysis, synthesis, place and route, and design verification
  -Create comprehensive test benches and simulation environments
  -Collaborate with cross-functional teams including hardware engineers, software developers, and system architects
  -Debug and troubleshoot FPGA designs at both simulation and hardware levels
  -Develop technical documentation including design specifications, test plans, and user guides
  -Support hardware integration, manufacturing, and production deployment activities
  BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical field
  - 7+ years of FPGA design experience
  - Experience with AMD Xilinx Versal ACAP FPGA architecture and development tools
  - Demonstrated expertise with Microchip IGLOO2 FPGA platform
  - Strong proficiency in Verilog HDL for RTL design and verification
  - Experience with FPGA design tools (Vivado, Libero SoC, or equivalent)
  - Solid understanding of digital design principles, timing analysis, and clock domain crossing
  - Experience with simulation tools (ModelSim, VCS, or similar)
  - Strong debugging and problem-solving skills
  - HDL Languages: Verilog (required), SystemVerilog (preferred)
  - FPGA Platforms: Versal ACAP, IGLOO2
  - Design Tools: Xilinx Vivado, Microchip Libero SoC
  - Simulation: ModelSim, Vivado Simulator, or equivalent
  - Scripting: Python, TCL, or Perl for design automation
  - Protocols: Understanding of industry-standard communication protocols
  PREFERRED QUALIFICATIONS - Experience with SystemVerilog and UVM methodologies
  - Knowledge of high-speed interfaces (PCIe, DDR, Ethernet, SerDes)
  - Familiarity with embedded systems and hardware-software integration
  - Experience with version control systems (Git, SVN)
  - Background in signal processing, communications, or related applications
  - Experience with DO-254 or other safety-critical design standards
  
  Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
  
  Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
  
  

  The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at .

  
  
  USA, WA, Redmond - 159 300.00 USD annually Read Less

  Apply Now

Load more jobs