AMTS is looking for experienced Semiconductor Construction Managers to lead the planning, execution, and delivery of major capital construction projects supporting our advanced 300mm semiconductor manufacturing campus in Lehi, Utah. This position is responsible for managing all phases of semiconductor facility construction, from conceptual design through commissioning and operational handover. The successful candidate will serve as the owner's representative and collaborate closely with engineering teams, design consultants, contractors, suppliers, and manufacturing stakeholders to ensure projects are delivered safely, on schedule, within budget, and in accordance with TI's operational and manufacturing standards.
Roles and Responsibilities
Project Leadership
Manage large-scale semiconductor capital projects ranging from facility upgrades to new fab construction.Lead all phases of project execution including:Scope developmentDesign reviewsProcurement strategyConstruction executionStartup and commissioningFinal turnover to manufacturing operationsDevelop and maintain project schedules, budgets, and key performance indicators.
Construction Management
Oversee general contractors and specialty subcontractors performing:Cleanroom constructionStructural and architectural systemsMechanical systemsElectrical distribution systemsProcess utility installationsSpecialty gas and chemical distribution systemsMonitor construction progress and implement corrective actions to mitigate schedule or cost risks.Ensure strict compliance with safety regulations and TI construction standards.
Semiconductor Facility Systems
Provide oversight for construction and commissioning of:
Cleanroom environmentsHVAC and contamination control systemsUltrapure water (UPW) systemsWastewater treatment systemsSpecialty gas delivery systemsProcess cooling water systemsChemical distribution systemsElectrical substations and backup power systemsExhaust and abatement systems
Stakeholder Management
Coordinate across:ManufacturingFacilities EngineeringProcess EngineeringEnvironmental Health & SafetySupply ChainExternal engineering firmsConstruction contractorsPresent project status, risks, and mitigation plans to senior leadership.
Position Requirements
Required Qualifications
10+ years of construction management experience, including:Semiconductor facilitiesAdvanced manufacturing facilitiesPharmaceutical or biotech facilitiesData centersMission-critical infrastructureExperience managing projects exceeding $100M in capital value.Demonstrated experience with:EPC project deliveryDesign-build constructionContractor managementCost and schedule controlsConstruction safety programs
Preferred Qualifications
Bachelor's degree in:Construction ManagementCivil EngineeringMechanical EngineeringElectrical EngineeringOr related technical disciplineExperience with:
300mm semiconductor wafer fabsCleanroom construction and certificationSemiconductor process utilitiesOwner-side capital project managementPrimavera P6 schedulingBIM/VDC coordinationCommissioning and qualification activitiesLEED-certified facilities
Leadership Competencies
The ideal candidate will demonstrate:
Strong technical judgmentExceptional communication and stakeholder management skillsAbility to lead multidisciplinary teamsStrategic thinking and problem solvingCommitment to safety excellenceAbility to manage multiple large-scale projects simultaneously
Working Environment
This role is primarily based at TI's semiconductor manufacturing campus in Lehi, Utah and requires regular field presence in active construction environments. The position involves:
Daily interaction with construction teams and contractorsWalking active construction sites and cleanroom spacesOccasional travel to other TI manufacturing sites and supplier locationsParticipation in off-hours shutdowns and critical facility upgrades as requiredCompany DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.
AMTS is looking for Gas / Chemical Technicians to join our team in Lehi, UT! The ideal candidate must demonstrate technical knowledge, good judgment, skills and understanding of systems/equipment associated with Gasses and Chemicals. You will be required to work with and support team members on routine tasks. You will be asked to perform independent projects to resolve technical problems with little supervision while demonstrating the site’s core values.
Roles and Responsibilities
Adhere to all site standards for safety, environment, security, quality and housekeeping.Perform safety analyses (JHA) as needed.Monitor TRAIN profile staying current with Certifications and Re-certifications.Maintain computer proficiency in Microsoft products (Word, Excel, Outlook, Internet Explorer, etc.)Complete daily tasks such as entries into order log of work performed, changing work order status as required, daily time sheet entries and verifying work order is assigned to the correct FPM.Keep Supervisor informed regarding progress of assigned work as appropriatePlay an active role in safety, actively participating in safety discussion, training and safe work practices.Play a lead role while working with other team members on tasks or projects, assist in training junior level employees.Ensure the shop and other work areas are clean and orderly.Research and order necessary parts through ordering system (e.g., MATREQ,Reqit).
Position Requirements
Have functional knowledge of facilities gas and/or chemical systems and associated equipment.Prioritize tasks effectively and complete assigned duties in a timely manner.Perform routine and intermediate troubleshooting and accurately diagnose gas or chemical equipment and systems.Perform routine repairs, rebuilds or replacement of gas or chemical equipment and systems.Read and understand blueprints, one-line drawings, P&ID’s and schematic diagrams.Write procedures using manuals and working knowledge; and maintain system documentation.Take chemical samples using approved methods and deliver them to the Lab for analysis, interpret data received from the lab to determine if chemical meets the required specification for use.Perform intermediate to complex preventative and corrective maintenance on all industrial equipment
Qualifications
Self-Contained Breathing Apparatus (SCBA) Certification.
Hazardous Materials Emergency Response Team (HAZMERT) Certification.
Air Purifying Respirator (APR) Certification.
Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.
AMTS is hiring Electrical QARs (Licensed Electricians) for our semiconductor project in Taylor, TX. You must have Journeyman Electrician license and inspection experience in industrial environments, strong knowledge NEC and safety codes, ability to troubleshoot electrical/ control systems if needed, perform routine maintenance on electrical wiring and systems. You should be able to demonstrate a thorough understanding of the Site Electrical systems and their relationship to other systems.
Responsibilities:
Install and repair electrical equipment in semiconductor fabs.Install various types of raceway and cable tray systems.Troubleshoot motor and control systems.Perform routine maintenance on electrical wiring and systems.Adhere to all quality and safety codes.Able to track hours in the field and to assess earned value; coordinate prefacilities readiness check lists.Able to resolve technical construction questions in the field.Able to communicate with trades (speak language of the trades). Technically skilled to act as the interface between trades, the designers and the tool owners; need to understand tool drawing set for the corresponding functional area, to solve field contraction issues.
Qualifications:
Must hold an active electrical journeyman licenseYou shall have past experience in starting up & commissioning equipment, systems, generators, and switchgear.Excellent people and communication skills, both verbal and written.Must be disciplined, taking leadership and ownership of tasks and able to complete tasks to schedule and priority.Proficient in Microsoft Word and Excel.Must be able to work effectively across disciplines, work groups and with contractors to complete tasks and objectives.Excellent understanding of local and national codes all of its applications and exceptions in the national electrical code and compliance.Thorough knowledge of industrial installation practices.Must be able to work in a professional environment.Must be able to schedule and manage multiple inspections and understand schedule priorities as required.
Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.
AMTS is looking for a Design Field Coordinator (Revit / BIM) to join Semiconductor Construction / Advanced Manufacturing project in Boise, ID.
Job Overview
We are seeking an experienced Design Field Coordinator to support large-scale, high-tech construction projects. This role serves as a key link between design teams, BIM/VDC teams, and field execution, ensuring that design deliverables are coordinated, buildable, and ready for construction.
This position requires expert-level Revit experience and a strong onsite presence to support real-time coordination, troubleshoot issues, and ensure seamless integration between design and field operations.
Key Responsibilities
Design & Field Coordination
Act as the primary liaison between multi-discipline design teams, BIM/VDC, and field stakeholdersEnsure Revit models, drawings, and design data are coordinated and construction-readyParticipate in design reviews and field coordination meetings focused on constructabilityIdentify and resolve design issues before they impact field installationServe as the go-to contact for field questions, clarifications, and design supportRevit Expertise & Technical Support
Provide advanced Revit support, including troubleshooting performance issues, errors, and workflowsManage model setup, views, families, and worksetsSupport and enforce BIM/Revit standards and best practicesAssist teams with complex modeling challenges and technical problem-solvingStandards, Templates & Continuous Improvement
Develop and maintain Revit templates, standards, and workflowsEnsure consistency and compliance across all design deliverablesCapture and implement field feedback and lessons learned to improve processesTraining & Mentorship
Provide hands-on training and guidance to design and field teamsAct as a technical subject matter expert for Revit and coordination workflowsHelp elevate overall team capability through coaching and support
Qualifications
5+ years of experience in BIM/VDC, design coordination, or advanced Revit rolesExpert-level proficiency in Revit (required)Strong understanding of multi-discipline coordination and construction workflowsExperience supporting field teams in active construction environmentsProven ability to troubleshoot and resolve technical issues in real-timeExcellent communication and coordination skills, especially in onsite settingsCompany DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.AMTS is hiring Electrical QARs (Licensed Electricians) for our semiconductor project in Taylor, TX. You must have Journeyman Electrician license and inspection experience in industrial environments, strong knowledge NEC and safety codes, ability to troubleshoot electrical/ control systems if needed, perform routine maintenance on electrical wiring and systems. You should be able to demonstrate a thorough understanding of the Site Electrical systems and their relationship to other systems.
Responsibilities:
Install and repair electrical equipment in semiconductor fabs.Install various types of raceway and cable tray systems.Troubleshoot motor and control systems.Perform routine maintenance on electrical wiring and systems.Adhere to all quality and safety codes.Able to track hours in the field and to assess earned value; coordinate prefacilities readiness check lists.Able to resolve technical construction questions in the field.Able to communicate with trades (speak language of the trades). Technically skilled to act as the interface between trades, the designers and the tool owners; need to understand tool drawing set for the corresponding functional area, to solve field contraction issues.
Qualifications:
Must hold an active electrical journeyman licenseYou shall have past experience in starting up & commissioning equipment, systems, generators, and switchgear.Excellent people and communication skills, both verbal and written.Must be disciplined, taking leadership and ownership of tasks and able to complete tasks to schedule and priority.Proficient in Microsoft Word and Excel.Must be able to work effectively across disciplines, work groups and with contractors to complete tasks and objectives.Excellent understanding of local and national codes all of its applications and exceptions in the national electrical code and compliance.Thorough knowledge of industrial installation practices.Must be able to work in a professional environment.Must be able to schedule and manage multiple inspections and understand schedule priorities as required.
Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.
Launch Your Career in Semiconductor Manufacturing with AM Technical Solutions!
We are looking for motivated, detail-oriented individuals to join our team as Semiconductor Test Technicians in Boise, Idaho. This is an excellent opportunity for local candidates interested in technology, manufacturing, electronics, or hands-on technical work.
No semiconductor experience is required. We provide training for candidates with strong mechanical aptitude, technical curiosity, and a commitment to quality and safety.
As a Semiconductor Test Technician, you will support the testing, monitoring, and troubleshooting of advanced semiconductor products that power today's computers, smartphones, vehicles, and artificial intelligence technologies.
What You'll Do
Operate and monitor semiconductor test equipment.Perform product testing according to established procedures and specifications.Load and unload semiconductor components and test hardware.Review test results and identify potential issues or abnormalities.Document test data and production information accurately.Follow detailed work instructions and quality standards.Assist with equipment setup, calibration, and basic troubleshooting.Maintain a clean and organized work environment.Follow all safety and cleanroom procedures.Work closely with engineers, technicians, and manufacturing teams to support production goals.What We're Looking For
High school diploma or GED required.Technical certificate, vocational training, military experience, or associate degree is a plus.Strong attention to detail and ability to follow procedures.Basic computer skills and comfort working with technology.Mechanical aptitude and willingness to learn.Ability to work independently and as part of a team.Reliable attendance and strong work ethic.Ability to work in a fast-paced manufacturing environment.Ideal Backgrounds
Community college students and graduatesTechnical school graduatesMilitary veteransElectronics, automotive, manufacturing, and warehouse professionalsCandidates seeking a long-term technical career path
Integrity is a must as safety is a priority and all test results must be accurate. This is not a lab position, this is a construction position within an industrial facility. This is an entry level position within the semiconductor industry, you must be mechanically inclined and willing to learn!
Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.
The VDC Technologist – Autodesk Forma (formerly ACC) SME Design plays a crucial role in leveraging Autodesk Forma tools to enhance virtual design and construction processes. This position focuses on utilizing subject matter expertise to streamline workflows, improve design coordination, and support the integration of visual and data-rich project information throughout the project lifecycle.
Responsibilities
Serve as the primary Autodesk Forma (ACC) expert to guide design teams and project stakeholders.Develop and implement virtual design and construction workflows using Autodesk Forma tools.Collaborate with architects, engineers, and contractors to ensure design coordination and clash detection.Customize and optimize Autodesk Forma configurations to meet project-specific needs.Provide training and technical support on Autodesk Forma applications to team members.Integrate project data and 3D models into cohesive presentations and reports.Help maintain BIM standards and ensure data integrity throughout project phases.Stay current with the latest Autodesk Forma updates and industry VDC best practices.Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.We are looking for experienced Tool Install Construction Coordinators to support the planning, coordination, and execution of semiconductor manufacturing equipment installations within advanced fabrication facilities in Hillsboro, OR. This role serves as a key liaison between tool vendors, construction teams, facilities personnel, and project stakeholders to ensure successful equipment delivery, installation, hookup, testing, and turnover.
The ideal candidate possesses experience in semiconductor tool installation, equipment moves, factory startup activities, or construction coordination within cleanroom environments and is capable of managing multiple installation activities simultaneously while maintaining strict safety, quality, and schedule requirements.
Key Responsibilities
Coordinate semiconductor equipment installation activities from delivery through final turnover.Serve as the primary point of contact between tool vendors, subcontractors, facilities teams, and client representatives.Develop and maintain detailed installation schedules, milestones, and readiness plans.Coordinate tool delivery logistics, staging, rigging, and movement into cleanroom and support areas.Verify construction and facilities readiness prior to tool installation, including utilities, structural supports, cleanroom conditions,and access requirements.Coordinate installation contractors performing rigging, setting, leveling, anchoring, and assembly of semiconductor manufacturing equipment.Track installation progress and proactively identify schedule risks, resource conflicts, and potential delays.Facilitate daily and weekly coordination meetings with stakeholders and installation teams.Ensure required permits, work authorizations, safety documentation, and installation packages are complete prior to work execution.Support mechanical, electrical, process piping, gas, chemical, exhaust, and controls hookup activities.Monitor contractor compliance with semiconductor facility safety requirements and cleanroom protocols.Coordinate factory acceptance testing (FAT), site acceptance testing (SAT), startup activities, and equipment commissioning.Manage punch list items, turnover documentation, and project closeout activities.Maintain accurate installation status reports and communicate progress to project leadership.
Qualifications
Associate's or Bachelor's degree in Engineering, Construction Management, Project Management, or related field; equivalent experience considered.7+ years of semiconductor tool installation, equipment coordination, construction coordination, or facilities project experience.Experience working in semiconductor fabrication facilities, cleanrooms, or advanced manufacturing environments.Knowledge of semiconductor equipment installation processes and vendor coordination.Understanding of facility systems including electrical, process piping, HVAC, exhaust, gas, chemical, and controls infrastructure.Proficiency with Microsoft Office Suite and project management software.Strong organizational, communication, and problem-solving skills.Ability to manage multiple equipment installations simultaneously in a fast-paced environment.
Preferred Qualifications
Direct experience supporting tool installation projects within semiconductor fabs.Knowledge of installation readiness reviews and commissioning processes.Experience with equipment move-in, hook-up, startup, and qualification activities.OSHA 10 or OSHA 30 certification.Familiarity with semiconductor manufacturing environments.Company DescriptionAM Technical Solutions (AM), founded in 1994, is a proven and licensed architect, engineering, and construction firm. Our company delivers the entire scope of work for high-tech construction projects on schedule, on budget, and at the level of quality required by customers.