You arrive ready to keep a fast-moving operation running at its best. Your morning starts with a review of scheduled preventive and predictive maintenance, followed by a walkthrough of production lines and facility systems. A conveyor motor hums off-beat—you track it down, read the electrical schematic, lockout/tagout, and diagnose the issue. Midday, you pivot to a PLC-driven piece of equipment that’s tripping faults, then support a machine changeover for a new run. Before you wrap, you document your work orders, update supervisors, and line up parts for tomorrow’s install.
What You’ll HandlePerform mechanical and electrical troubleshooting on production machinery, material handling equipment, and facility systemsConduct preventive and predictive maintenance to reduce unplanned downtimeDiagnose issues with hydraulics, pneumatics, motors, bearings, conveyors, PLC-driven equipment, and automation componentsComplete work orders, document repairs, and communicate status updates with supervisorsRead and interpret schematics, blueprints, and equipment manualsSupport new equipment installs, machine changeovers, and continuous improvement initiativesEnsure safety procedures and lockout/tagout protocols are followedTools You’ve MasteredBring strong hands-on depth across electro-mechanical systems and the discipline to do it safely, precisely, and on time. The following experience will set you up for success:
Creating Preventive Maintenance PlansHeavy Equipment RepairMechanical Troubleshooting Skills120/208/240/480 Voltage SystemsJourneyman’s LicenseElectrical InstallationElectrical TroubleshootingElectrical RepairHigh Voltage SystemsPneumatics TroubleshootingBoiler TroubleshootingBoiler OperationMaintenance and Repair SkillsConduit BendingIndustrial Electrical ExperienceCNC Machine Setup & ChangeoverIndustrial Electrical SystemsHydraulic Systems & ComponentsElectrical Systems & Diagnostics (Heavy Equipment)Equipment Diagnostics & TroubleshootingMechanical Systems & Component RepairElectrical Panel InstallationElectrical Schematic ReadingEquipment Installation & WiringEquipment Repair & MaintenanceEquipment InstallationAutomotive Manufacturing SystemsWhy This RoleIn this role you’ll be the go-to problem solver who keeps production moving. If you love diagnosing complex issues, translating blueprints into action, and making an impact where uptime matters, we’d like to meet you.
Read LessOur client is seeking an experienced Industrial Controls Engineer to join a growing engineering team responsible for designing, programming, and commissioning automated manufacturing equipment. This individual will play a key role in developing control systems from concept through startup while collaborating with mechanical engineering, manufacturing, and customers to deliver reliable automation solutions.
This is an excellent opportunity for an engineer who enjoys hands-on work, solving complex automation challenges, and seeing projects through from design to commissioning.
Responsibilities Design, develop, and implement industrial control systems for automated manufacturing equipment.Program and troubleshoot PLCs, HMIs, VFDs, servo systems, and industrial networks.Develop electrical schematics, panel layouts, and Bills of Material using AutoCAD Electrical or similar software.Configure industrial communication protocols including EtherNet/IP, Profinet, Modbus, Ethernet TCP/IP, and DeviceNet.Integrate motion control systems including servos, drives, robotics, vision systems, and safety controllers.Perform equipment testing, debugging, FATs, SATs, and system validation.Support equipment installation, startup, and commissioning at customer facilities.Diagnose and resolve electrical, controls, and software issues during production and field service.Collaborate with mechanical engineering, manufacturing, and project management throughout project execution.Create and maintain technical documentation including electrical drawings, PLC documentation, operator manuals, and commissioning reports.Support continuous improvement initiatives by identifying opportunities to improve machine reliability, uptime, and performance. QualificationsBachelor's degree in Electrical Engineering, Controls Engineering, Mechatronics, or related field (or equivalent industry experience).
3+ years of experience designing industrial automation or machine control systems.
Strong PLC programming experience with one or more of the following:- Allen-Bradley / Rockwell
SiemensMitsubishiOmronBeckhoffExperience programming HMIs such as FactoryTalk View, WinCC, or similar.
Knowledge of servo systems, VFDs, motion control, and industrial robotics.
Experience with industrial networking and communication protocols.
Ability to read and create electrical schematics.
Familiarity with AutoCAD Electrical, EPLAN, or equivalent design software.
Strong troubleshooting skills in electrical and automation systems.
Willingness to travel up to 20–30% for customer installations and commissioning.
Preferred Qualifications Experience with robotic integration (Fanuc, ABB, KUKA, Yaskawa, Universal Robots, etc.).Vision system experience (Cognex, Keyence, Banner).Experience with machine safety systems and safety PLCs.Knowledge of SQL databases, SCADA systems, or IIoT technologies.Experience working in custom machine building, systems integration, automotive, food & beverage, packaging, material handling, or manufacturing automation. What We're Looking ForWe're looking for someone who enjoys taking ownership of automation projects and thrives in a collaborative engineering environment. The ideal candidate is technically strong, enjoys solving complex controls challenges, and is comfortable working both in the office and on the manufacturing floor.
Benefits Competitive base salaryAnnual bonus opportunityComprehensive medical, dental, and vision coverage401(k) with company matchPaid vacation and holidaysCareer advancement opportunitiesOngoing technical training and professional developmentStable, growing organization with long-term career potentialYou should be proficient in:
CAD SoftwarePLC Programming ExperienceIndustrial Electrical ExperienceMachines & technologies you'll use:
Variable Frequency Drives (VFD)CAD SoftwareProgrammable Logic Controller (PLC)Servo Motors Read LessWe are seeking a Quality Technician to support manufacturing operations by ensuring products meet quality standards throughout the production process. This is a hands-on position that works directly on the plant floor, performing inspections, measurements, and quality checks to support production and customer requirements.
The ideal candidate will have experience performing quality inspections in a manufacturing environment and be comfortable working closely with production personnel.
Responsibilities Perform hourly quality inspections throughout the production process.Conduct first article inspections on new and existing production runs.Measure parts using precision measuring equipment, including calipers and other inspection tools.Verify part fit, functionality, and compliance with specifications.Inspect products for defects and identify quality concerns.Document inspection results and communicate issues to production leadership.Support containment and corrective action activities when quality issues arise.Work closely with production personnel to ensure quality standards are maintained.Assist with continuous improvement efforts related to quality and manufacturing processes.Maintain a safe and organized work environment. Qualifications Previous experience in a Quality Technician, Quality Inspector, or similar manufacturing quality role.Experience using measuring and inspection equipment.Ability to read and interpret drawings, specifications, and work instructions.Strong attention to detail and problem-solving skills.Comfortable working on the manufacturing floor for the majority of the shift.Experience in plastics manufacturing, thermoforming, injection molding, metal stamping, fabrication, or similar manufacturing environments preferred. Read LessPosition Summary
We are seeking an experienced CNC Programmer with strong 5-axis machining experience to support the programming and manufacturing of precision-machined components. This individual will be responsible for creating, optimizing, and troubleshooting CNC programs while working closely with machinists, engineering, and production teams to ensure quality, efficiency, and on-time delivery.
Responsibilities Create and edit CNC programs for 3-axis, 4-axis, and 5-axis machining centers.Develop machining strategies, tool paths, and setup documentation for complex components.Read and interpret engineering drawings, GD&T, and CAD models.Select appropriate tooling, speeds, feeds, and machining processes.Support machinists during machine setup, prove-outs, and production runs.Troubleshoot machining, programming, and quality issues as they arise.Optimize existing programs to improve cycle times, quality, and efficiency.Collaborate with engineering and manufacturing teams on new product launches and process improvements.Ensure all programs meet quality, safety, and production requirements.Maintain organized program files, tooling records, and process documentation. Qualifications 3+ years of CNC programming experience in a manufacturing environment.Hands-on experience programming true simultaneous 5-axis machining centers.Proficiency with CAM software such as Mastercam, Tebis, HyperMill, NX, Fusion 360, or similar.Ability to read and interpret blueprints, CAD models, and GD&T.Strong understanding of cutting tools, workholding, feeds, speeds, and machining practices.Experience with machine setup, prove-outs, and process optimization.Familiarity with Fanuc, Heidenhain, Siemens, or similar CNC controls.Strong troubleshooting and problem-solving skills. Preferred Qualifications Experience with aerospace, defense, automotive, medical, or precision machining industries.Exposure to automation, probing systems, and CMM inspection equipment.Experience supporting new machine installations and process development.Knowledge of lean manufacturing and continuous improvement initiatives.Machines & technologies you'll use:
CNC Mill (5+ axis VMC) (Fanuc, Mitsubishi, Mazak, Haas, Okuma, Kitamura, Hwachon, Dmg Mori Seiki, Mikron, Matsuura)CNC Lathe (5+ axis) (Mazak, Okuma, Doosan, Index, Eurotech, Miyano, Hwachon, Nakamura, Samsung, Dmg Mori Seiki) Read LessThe Straightener is responsible for straightening parts and checking the straightness of parts in accordance with work instructions to meet customer requirements. This position will be located at our facility in Warsaw, IN on a 2nd shift schedule.
What You'll Do:
Responsible for strengthening parts per customer requirements.
Check orders in Straightening area for paperwork accuracy, verify count and move to next location
Follow urgent needs jobs through the straightening area to guarantee delivery
Runs production in accordance with established procedures and guidelines
Maintain production quality to customer requirements
Read and interpret blueprints and work operation sheets to determine appropriate operations to be performed.
Reports key job status to Departmental Supervisor or Manufacturing Manager
Cross train in other finishing areas.
Comply with all company policies and procedures
Other duties as assigned.
What You'll Need:
Ability to multi-task and prioritize and work with a sense of urgency
Read and interpret blueprints and work operation sheets to determine appropriate operation to be performed
Ability to use dial indicators
Good interpersonal skills
Physical ability to lift 50 lbs.
Self-starter and ability to work in a fast-paced environment
Minimum of a High School Diploma or equivalent.
You should be proficient in:
Blueprint Reading Read LessJob Description
Aegis is looking for motivated Welders to join our team. As a Production MIG Welder you will ensure quality and timely welding and be able to operate within the safety standards required for the welding procedures and controls.
RESPONSIBILITIES:
Welding products according to work instructions and ensure compliance with the appropriate quality standardsMonitor welding, burning, and fitting process to ensure parts are not overheated or damaged from warping, distortion, expansion, or shrinkageDeliver daily production output demands and communicate timely with the appropriate personnel on any problems or delaysAssist at a variety of workstations throughout the work process as neededQUALIFICATIONS:
Previous welding knowledge accompanied by the appropriate educationUnderstand and apply written and oral instructionsAbility to work in a team environment and effectively communicateMust comply with legal and corporate responsibilitiesWORK ENVIRONMENT DEMANDS:
This work is deadline-oriented, requires multitasking, fluctuating work schedule, and flexibility within the workdayRequires the ability for close vision, distance vision and depth perceptionRequires working and interacting with others and the ability to listen effectively, communicate clearly, maintain attention to detail, and perform focused workThe following motions can be required during the day: Standing for extended periods of time, stepping up & down, balancing, bending (hip & knees), reaching, standing, walking, pulling, pushing, lifting (from floor to waist, waist to chest, chest to head), observing, hearing, grasping, pressing, and other repetitive actionsRequires continuous motion throughout the day, utilization of tools, equipment, and industrial vehicles, the ability to lift 25lbs, and perform physically demanding tasks as deemed necessaryThis work requires the proper attire and use of PPE which can include eyewear, steel toed protection, hard hat, gloves, earbuds, and other PPE as deemed necessaryWork with and/or around potentially dangerous equipmentThis position requires working with various temperature conditionsBENEFITS:
Team Member Ownership/ESOPHealthcare, vision, dental optionsCompany paid Long Term DisabilityOn-site health clinic and gymTen (10) paid holidaysPaid Time Off401kTwo (2) Paid volunteer days per yearYou should be proficient in:
Welding Setups for ProductionVehicle & Fleet WeldingMIGTIGWeldingMachines & technologies you'll use:
MIG WelderTIG WelderGTAW WelderGMAW Welder Read LessPicture the start of your shift: you open the day’s jobs, load stock, and map out toolpaths that turn raw material into precise components. You keep production flowing by programming, setting up, running, and refining operations—then finishing each part to spec and documenting every step.
What you’ll doProgram and run fabricating equipment to perform drilling, reaming, tapping, countersinking, punching, and related machining tasks within documented capabilities.Translate job specs into action—read prints, follow travelers, and execute requirements accurately.Dial in machines with minor, on-the-fly adjustments to maintain quality and throughput.Inspect what you produce; if needed, rework parts to correct defects and meet acceptance criteria.Finishing for qualityDeburr edges to meet inspection standards.Sand components to the specified finish.Wash parts per job requirements.Programming and setupProgram and set up standard operations for 2-, 3-, 4-, and multi‑axis machines.Maintenance and reliabilityPerform routine upkeep: clean work areas and apply grease/oil to machines to keep them running smoothly.Documentation and recordkeepingCapture job details accurately, including:CAM file storageEmployee time cardsMachine time cardsContinuous improvement (CAR participation)Initiate and support Corrective Action Reports by:Identifying errors and opportunities to improve processesParticipating in continuous improvement effortsApproving CAR closures when criteria are metFollowing established procedures for corrective actions and handling nonconforming productMaterial prep and workplace organizationPrepare stock material according to production needs.Champion 5S—keep your cell and shared areas (saws, non‑CNC machines) clean and organized.MentorshipAct as a ‘Master’ trainer per the Training Matrix, supporting and mentoring teammates.You bringGD&T proficiencyCNC Programming expertiseG‑CodeM‑CodeCNC machine setup & changeover Read LessWe are seeking a skilled and dedicated Maintenance Mechanic to join our team in Murfreesboro, TN, 37167. In this role, you will play a crucial part in ensuring the smooth operation of our facility by maintaining and repairing a variety of machinery and equipment. If you have a passion for problem-solving and a strong mechanical aptitude, we want to hear from you!
Responsibilities Perform routine maintenance and repairs on machinery and equipment to ensure optimal performance.Diagnose mechanical issues and troubleshoot problems effectively.Conduct inspections and preventive maintenance to minimize downtime.Maintain accurate records of maintenance activities and repairs.Collaborate with team members to improve maintenance processes and efficiency.Follow safety protocols and maintain a clean and organized work environment.Assist in the installation of new equipment as needed. Qualifications High school diploma or equivalent; technical training in maintenance or a related field is a plus.Proven experience as a maintenance mechanic or similar role.Strong understanding of mechanical systems, tools, and equipment.Ability to read and interpret technical manuals and schematics.Excellent problem-solving skills and attention to detail.Strong communication skills and ability to work well in a team environment.Willingness to work flexible hours and respond to emergency maintenance needs. Read LessIf you nodded along, read on.
About the companyAegis is partnered with a long-standing manufacturer of commercial plumbing products—over 100 years of producing high-quality industrial components. Expect low turnover, strong benefits, and a culture that prizes quality, safety, teamwork, and continuous improvement. It’s a place where people stay and grow.
In this role, you will Oversee day-to-day machine shop activity on second shiftRun and support Makino machining centers and MMC pallet pool systemsServe as the on-floor technical lead for CNC operatorsTrain and mentor new operatorsDiagnose and resolve machining, tooling, and production issuesCollaborate with maintenance, engineering, and the tool roomTrack tooling inventory; handle replacement, repair, and maintenancePerform quality checks and confirm production outputMove materials and document activity in SAPSupport continuous improvement and efficiency projectsBack up the Machine Shop Supervisor as needed Must-haves 5+ years of experience in a machine shopCNC machining environment experienceBackground training or mentoring operatorsStrong blueprint/print readingCross-functional work with engineering, maintenance, and tooling teamsFamiliarity with SAP or similar ERP systemsExcellent troubleshooting and problem-solving Bonus points Team Lead or Supervisor experienceMakino machining centersMMC pallet pool systemsLean/Continuous ImprovementG-Code programming exposureJourneyman Machinist or technical certifications Perks and schedule Four-day workweek (Monday–Thursday)Very low turnover; long-tenured teamsCompetitive benefits, including 401(k) matchOvertime availableLeadership responsibility while staying hands-onStable company with a strong focus on development and retention What you’re great at Leadership / People ManagementCNC ToolingCNC Machine Setup & Changeover Equipment on deck EDM Drilling MachineCNC Mill (5+ axis VMC)CNC Lathe (5+ axis)If you enjoy elevating a team, keeping quality tight, and solving problems in real time, this opportunity checks every box.
Read LessShift: 2nd Shift (2:00 PM – approximately 11:00 PM)
Pay: $23.00–$27.00/hour + $1 shift diff
Overtime: Approximately 10 hours per week, paid at 1.5x after 40 hours
Position OverviewWe are seeking a motivated Production Team Lead to join a growing manufacturing operation. This is an excellent opportunity for someone who has recently stepped into a leadership role or is an experienced production employee with strong leadership potential. This position is ideal for an individual who enjoys leading by example while remaining hands-on in the manufacturing environment.
This role serves as a "player-coach," supporting daily production while providing leadership to the team. The Production Team Lead will assist with overseeing safety, quality, productivity, and employee development, while stepping in for the Production Supervisor as needed.
Key Responsibilities Support daily production activities to ensure safety, quality, and production goals are achieved.Provide leadership and direction to production team members while working alongside them on the floor.Serve as acting supervisor during supervisor absences, meetings, training, or vacations.Coach, train, and develop production operators.Troubleshoot production issues and assist operators with resolving equipment and process concerns.Work closely with the maintenance team to diagnose and resolve mechanical or process-related issues when necessary.Perform machine setups and changeovers to support production schedules.Track production metrics and assist with continuous improvement and workplace organization initiatives.Promote a positive, team-oriented culture focused on continuous improvement and operational excellence. Qualifications At least one year of leadership experience in a manufacturing or production environment, or demonstrated leadership abilities in a production role.Strong understanding of manufacturing processes and equipment.Technical aptitude with exposure to hydraulics, pneumatics, and basic electrical systems.Ability to troubleshoot production issues and make sound decisions in a fast-paced environment.Strong communication, problem-solving, and organizational skills.Willingness to lead by example and foster a collaborative team environment. What We're Looking ForSuccess in this role is driven by attitude as much as experience. We are looking for someone who is eager to learn, open to feedback, and committed to continuous improvement. The ideal candidate is dependable, adaptable, and motivated to help both the team and the operation succeed. Leadership potential, a strong work ethic, and a positive mindset are valued just as highly as technical experience.
Read Less